BD-J5900 Blu-ray™ Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Safety Information Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
• WARNING - This product contains chemicals known to the State of California to cause cancer and reproductive toxicit. FCC NOTE (for U.S.A) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function. • Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest. • Watching 3D images for an extended period of time may cause eye strain.
Getting Started Region Code Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Code for this player is displayed on the rear panel of the player.
• The bigger the image resolution, the longer the image takes to display. • This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites. • Your player only supports video with a frame rate under 30fps (frames per second). • Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.) • Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this player.
Front Panel AVCHD (Advanced Video Codec High Definition) • This player can play back AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format. • Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use "x.v.Color" format. • "x.v.
Connections Remote Control Tour of the Remote Control Connecting to a TV Turn the player on and off. Turn the TV on and off. After setup, allows you to set the input source on your TV. TV volume adjustment. Press to open and close the disc tray. Press the number buttons to operate options. Use to enter the popup menu/title menu. Use to enter the disc menu. Press to search a disc backwards or forwards. Press to pause a disc. Press to skip backwards or forwards. Press to stop a disc.
Connecting to an Audio System Connecting to a Network Router You can connect the Blu-ray player to an audio system using one of the methods illustrated below. -- Do not connect the power cord to the wall outlet until you have made all the other connections. -- When you change the connections, turn off all devices before you start. Method 1 Connecting to an HDMI compatible AV receiver You can connect your player to your network router using one of the methods illustrated below.
Settings Wireless Network The Setup Procedure Wireless Router Broadband service ✎✎ NOTES `` If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless network. `` Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
• Home Menu 6 1 PLAY DISC PHOTOS VIDEOS MUSIC 2 7 No Disc 8 App 1 App 2 App 3 App 4 App 5 More Screen Mirroring Change Device Settings 9 1 2 3 4 5 6 7 8 9 3 4 5 Selects VIDEOS. Selects MUSIC. Selects Settings. Selects Change Device. Selects Screen Mirroring. Selects PHOTOS. Selects PLAY DISC. Selects applications. Selects More applications.
✎✎ NOTES `` If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message "If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution." appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
✎✎ NOTES `` Be sure to select the correct Digital Output or `` `` `` `` `` `` you will hear no sound or just loud noise. If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM. Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects. Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
✎✎ NOTES `` You can get the Network values from your Internet provider. 8. When finished entering all the values, press the RETURN or EXIT buttons. The player verifies the network connection and then connects to the network.
7. Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The player connects to the network after the network connection is verified. ĞĞ WPS(PIN) Before you begin, open the router's setup menu on your PC and access the screen with the WPS PIN entry field. 1. In the Home screen, select Settings, and then press the v button. 2.
✎✎ NOTES `` The current wired or wireless network connection will be disconnected when you use the Wi-Fi Direct function. `` Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function. Screen Mirroring The Screen Mirroring function lets you view the screen of your smart phone or android tablet on the TV you have connected to the Blu-ray player. 1.
Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung players that have the Anynet+ feature. To operate this function, connect this player to an Anynet+ Samsung TV with an HDMI cable. With Anynet+ on, you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY ( ) button on the TV’s remote control. For more information, please see the TV user manual.
Support Settings Software Upgrade The Software Upgrade menu allows you to upgrade the player’s software for performance improvements or additional services. By Online To upgrade By Online, follow these steps: 1. In the player’s menu, go to Settings > Support > Software Upgrade 2. Select By Online, and then press the v button. The Connecting to Server message appears. 3. A popup message will appear if an update is available. 4. If you select Yes, download process started.
Media Play Method 2 Playing a Commercially Recorded Disc 1. Press the 8 button to open the disc tray. 2. Place a disc gently into the disc tray with the disc's label facing up. 3. Press the 8 button to close the disc tray. Playback starts automatically. Playing Files on a USB Device There are two methods you can use to play or view multimedia files located on a USB device through your player. Method 1 1. Turn the player on. 2. Connect the USB device to the USB port on the front panel of the player.
3. A screen appears listing the contents of the disc. Depending on how the contents are arranged, you will see either folders, individual files, or both. 4. If necessary, use the ▲▼◄►buttons to select a folder, and then press the v button. 5. Use the ◄►▲▼ buttons to select a file to view or play, and then press the v button. 6. Press the RETURN button one or more times to exit a current screen, exit a folder, or to return to the Home screen. Press the EXIT button to return directly to the Home Screen. 7.
Controlling Music Playback You can control the playback of music located on a Blu-ray disc, DVD, CD, USB device, or your computer. Buttons on the Remote Control used for Music Playback Repeat an Audio CD (CD-DA)/ MP3 1. During Playlist playback, press the TOOLS button. TRACK 001 CD 4 2 5 6 3 NUMBER buttons (Audio CD (CD-DA) only) : During Playlist playback, press the desired track number. The selected track is played.
5. Use the ▲▼ buttons to select the device to store the ripped files to, and then press the v button. ✎✎ NOTES `` Do not disconnect the device while ripping is in progress. 6. If you want to cancel ripping, press the v button and then select Yes. Select No to continue ripping. 7. When ripping is complete, the "Ripping is completed." message appears. Press the v button to go back to the Playback screen. ✎✎ NOTES `` This function may not be supported by some discs.
Appendix PROBLEM Troubleshooting Forgot password Before requesting service, please try the following solutions. PROBLEM No operation can be performed with the remote control. Disc does not play. Disc Menu does not appear. The prohibition message appears on the screen. Play mode differs from the Setup Menu selection. The screen ratio cannot be changed. No audio. The screen is blank. SOLUTION • Check the batteries in the remote control. They may need replacing.
PROBLEM SOLUTION I cannot connect to the BD-LIVE server. • Check whether the network connection is working or not by using the Network Status menu. • Check whether the USB memory device is connected to the player. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. • Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
Compliance and Compatibility Notice NOT ALL discs are compatible • Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. • Discs other than those listed above cannot be and are not intended to be played by this player.
Network Service Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
Samsung Electronics Canada Inc HEADQUARTERS 2050 Derry Rd West Canada Inc., Samsung Electronics Mississauga, L5NMisisauga, 0B9 55 StandishOn. Court Ontario L5R 4B2 Canada TEL: 1-800-SAMSUNG (726-7864) TEL: 1-800-SAMSUNG (1-800-7267864) FAX: (905) 542-1199 www.samsung.com/ca website: http://www.samsung.
BD-J5900 Lecteur de disque Blu-ray™ Guide d'utilisation imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Profitez de tous les avantages offerts par notre service intégral ! Enregistrez votre produit dès aujourd’hui sur le portail www.samsung.
Consignes de sécurité Avertissement ATTENTION RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR ATTENTION : AFIN DE LIMITER LES RISQUES D'ÉLECTROCUTION, NE RETIREZ JAMAIS LE COUVERCLE (OU LE CACHE ARRIÈRE). AUCUN DES ÉLÉMENTS INTERNES N’EST RÉPARABLE PAR L'UTILISATEUR. EN CAS DE PANNE,FAITES APPEL À UNE PERSONNE QUALIFIÉE. • Les fentes et les ouvertures de ce meuble et à l'arrière ou sur le dessous servent à assurer la ventilation nécessaire.
• AVERTISSEMENT - Ce produit contient des substances chimiques connues par l'État de la Californie comme étant cancérigènes et toxiques pour le système reproducteur. AVIS DE LA FCC (pour les É-U) Cet appareil a été mis à l’essai, il est conforme aux exigences en matière de limites pour un appareil numérique de classe B, selon le paragraphe 15 de la Réglementation de la FCC. Ces limites sont conçues pour prévenir raisonnablement les brouillages préjudiciables pour les installations domestiques.
Utilisation de la fonction 3D CONSIGNES IMPORTANTES RELATIVES À LA SANTÉ ET LA SÉCURITÉ EN CAS DE VISIONNAGE D'IMAGES 3D. Lisez attentivement les consignes de sécurité avant d'utiliser la fonction 3D. • Certains utilisateurs peuvent ressentir une gêne en visionnant des images de télévision en 3D, comme par exemple des vertiges, des nausées ou des maux de tête. Dès que vous ressentez un de ces symptômes, arrêtez immédiatement le visionnage en 3D, retirez les lunettes Active 3D et essayez de vous reposer.
Mise en route Code régional Avant de consulter le Guide ďutilisation Types de disques et contenus pouvant être lus sur ce lecteur Support VIDÉO MUSIQUE PHOTO ✎✎ Type de disque Disque Blu-ray Disque Blu-ray 3D DVD-VIDÉO DVD-RW DVD-R DVD+RW DVD+R CD-RW/-R, DVD-RW/-R, BD-RE/-R CD-RW/-R, DVD-RW/-R, BD-RE/-R Détails BD-ROM ou BD-RE/-R enregistré au format BD-RE. DVD-VIDÉO, DVD+RW/DVD-RW(V)/DVD-R/+R enregistrés ou finalisés, ou un support de stockage USB sur lequel des contenus MKV et MP4 sont stockés.
• Plus la résolution de l’image est élevée, plus lent le délai d'affichage de l'image. • Ce lecteur ne peut pas lire les fichiers MP3 de type DRM (Gestion des droits numériques) téléchargés depuis des sites commerciaux. • Votre lecteur ne prend en charge que les vidéos dont la vitesse de défilement des images est inférieure à 30 fps. (images par seconde). • Votre lecteur ne prend en charge que les périphériques de classe de stockage de masse (MSC) USB tels que clés et disques durs USB.
Panneau avant AVCHD (Codec vidéo avancé haute définition) • Ce lecteur prend en charge les disques au format AVCHD. Ces disques sont normalement enregistrés et lus sur des caméscopes. • Le format AVCHD est un format vidéo numérique haute définition. • Le format MPEG-4 AVC/H.264 compresse les images de manière plus efficace que le format de compression d'image conventionnel. • Certains disques AVCHD utilisent le format « x.v.Color ». Ce lecteur peut lire les disques AVCHD faisant appel au format « x.v.
Branchements Télécommande Boîtier de la télécommande Connexion du lecteur à un téléviseur Permet d'allumer et d'éteindre le lecteur. Permet d'allumer et d'éteindre le téléviseur. Permet de configurer la source d'entrée sur le téléviseur, une fois la configuration effectuée. Appuyez sur ce bouton pour ouvrir ou fermer le tiroir disque. Permet de régler le volume du téléviseur. Appuyez sur les boutons numériques pour commander les options. Permet d'accéder au menu contextuel/ menu titre.
Connexion à une chaîne hi-fi Connexion à un routeur réseau Vous pouvez connecter le lecteur Blu-ray à un système audio à l'aide de la méthode illustrée ci-dessous. -- Ne connectez pas le cordon d'alimentation avant d'avoir effectué toutes les autres connexions. -- Lorsque vous changez les connexions, éteignez tous les appareils avant de commencer. Méthode 1 Connexion à un récepteur AV compatible avec la technologie HDMI.
Configuration Réseau sans fil Configuration Routeur sans fil Service large bande ✎✎ REMARQUE `` Si le routeur prend en charge le protocole DHCP, votre lecteur pourra utiliser une adresse DHCP ou une adresse IP fixe pour la connexion au réseau sans fil. `` Réglez le routeur réseau en mode Infrastructure. Le mode Ad-hoc n'est pas pris en charge.
• Menu accueil 6 1 LIRE LE DISQUE PHOTOS VIDÉOS MUSIQUE 2 7 Pas de disque 8 App 1 App 2 App 3 App 4 App 5 Plus Screen Mirroring Changer Périph. Paramètres 9 1 2 3 4 5 6 7 8 9 3 4 5 3. Appuyez sur les touches ▲▼ pour sélectionner le sous-menu désiré, puis appuyez sur la touche v. 4. Appuyez sur les touches ▲▼ pour sélectionner l’élément désiré, puis appuyez sur la touche v. 5. Appuyez sur la touche EXIT pour quitter le menu.
✎✎ REMARQUE `` Si le téléviseur connecté ne prend pas en charge la fréquence cinéma ou la résolution sélectionnée, le message « Si aucune image ne s’affiche après avoir sélectionné ‘Oui’, patientez 15 secondes pour revenir à la définition précédente » apparaît. Si vous sélectionnez Oui, l’écran du téléviseur devient noir pendant 15 secondes et la résolution revient automatiquement à la résolution précédente.
✎✎ REMARQUE `` Veillez à sélectionner la sortie numérique appropriée, `` `` `` `` `` `` sans quoi vous risquez de ne rien entendre ou d’entendre un bruit fort. Si le périphérique HDMI (récepteur A/V, téléviseur) ne peut pas prendre en charge les formats compressés (Dolby numérique, DTS), le signal audio est émis en format PCM. Les DVD ordinaires n’offrent pas d’audio BONUSVIEW ni d’effets sonores de navigation. Certains disques Blu-ray n’offrent pas d’audio BONUSVIEW ni d’effets sonores de navigation.
✎✎ REMARQUE Paramètres réseau `` Vous pouvez obtenir les valeurs du réeau de Selectionnez le type de réseau votre fournisseur Internet. 8. Une fois l'opération de saisie terminée pour toutes les valeurs, Appuyez sur la touches RETURN ou EXIT. Le lecteur vérifie la connexion réseau puis se connecte à celui-ci.
7. Appuyez sur le bouton WPS(PBC) situé sur votre routeur dans les deux minutes qui suivent. Le lecteur obtient automatiquement toutes les valeurs des paramètres réseau nécessaires et se connecte au réseau. L'écran État du réseau apparaît. Le lecteur se connecte au réseau une fois que la connexion réseau a été confirmée. ĞĞ WPS(PIN) Avant de commencer, ouvrez le menu de configuration du routeur de votre ordinateur et accéder à l'écran comportant le champ de saisie NIP WPS. 1.
✎✎ REMARQUE `` La connexion réseau actuelle, câblée ou sans fil, est déconnectée lorsque vous utilisez la fonction Wi-Fi Direct. `` Des fichiers texte, comme des fichiers portant une extension .TXT ou .DOC ne peuvent pas être lus lors de l'utilisation de la fonction Wi-Fi Direct. Screen Mirroring La fonction Screen Mirroring vous permet d’afficher l’écran de votre téléphone intelligent ou d’une tablette androïde sur le téléviseur connecté au lecteur Blu-ray. 1.
Anynet+ (HDMI-CEC) Anynet+ est une fonction pratique qui offre un lien de fonctionnement avec d’autres lecteurs Samsung pourvus de la fonction Anynet+.Pour utiliser cette fonction, connectez ce lecteur à un téléviseur Samsung TV au moyen d’un câble HDMI. Avec la fonction Anynet+ on, vous pouvez utiliser ce lecteur avec une télécommande de téléviseur Samsung et lancer la lecture du disque en appuyant simplement sur la touche ) de la télécommande LIRE ( du téléviseur.
Soutien technique Mise à niveau du logiciel Le menu Mise à niveau du logiciel permet de mettre à niveau le logiciel du lecteur pour améliorer la performance ou obtenir des services additionnels. En ligne Pour mettre à niveau En ligne, exécutez les étapes suivantes: 1. Dans le menu du lecteur, allez à Paramètres > Soutien technique > Mise à niveau du logiciel. 2. Sélectionnez En ligne, puis appuyez sur la touche v. Le message Connexion au serveur en cours apparaît. 3.
Media Play Méthode 2 Lecture d’un disque vendu dans le commerce 1. Appuyez sur le bouton 8 pour ouvrir le tiroir disque. 2. Poussez delicatement un disque dans le tiroir, face imprimee dirigee vers le haut. 3. Appuyez sur le bouton 8 pour fermer le tiroir disque. La lecture commence automatiquemet. Lecture de fichiers stockés sur périphérique USB Il existe deux méthodes à votre disposition pour lire ou afficher des fichiers multimédia situés sur un périphérique USB par votre lecteur. Méthode 1 1.
3. Un écran s'ouvre énumérant le contenu du disque. Tout dépendant de l'organisation du contenu, vous verrez des dossiers, des fichiers ou les deux. 4. Si nécessaire, utilisez les boutons ▲▼◄► pour sélectionner un dossier, puis appuyez sur le bouton v. 5. Utilisez les boutons ▲▼◄► pour sélectionner un fichier à afficher ou à lire, puis appuyez sur le bouton v. 6.
Répétition d'un CD audio (CDDA)/MP3 Contrôle de l'écoute de musique Vous pouvez commander la lecture du contenu musical stocké sur disque Blu-ray, un DVD, un CD, un périphérique USB ou sur votre ordinateur. 1. Durant la lecture, appuyez sur le bouton TOOLS.
5. Utilisez les boutons ▲▼ pour sélectionner le périphérique à utiliser pour stocker les fichiers d'extraction, puis appuyez sur le bouton v. ✎✎ REMARQUE `` Ne débranchez pas le périphérique en cours d'extraction. 6. Si vous souhaitez annuler l'extraction de la piste, appuyez sur le bouton v, puis sélectionnez Oui. Sélectionnez Non pour continuer l'extraction. 7. Une fois l'extraction terminée, le message "Extraction terminée." apparaît à la fin du processus.
Annexes PROBLÈME Mot de passe oublié. Dépannage Avant de requérir une réparation, vérifiez d'abord les points suivants. PROBLÈME La télécommande ne permet d'exécuter aucune opération. Le disque ne fonctionne pas. Le menu du disque ne s'affiche pas. Le message d'interdiction apparaît à l’écran. Le mode Lecture n'est pas celui qui a été sélectionné dans le menu de configuration. Impossible de modifier le format d'image de l'écran. Absence de son. L'écran est blanc.
PROBLÈME SOLUTION Je n'arrive pas à me connecter au serveur BD-LIVE. • Vérifiez si la connexion réseau fonctionne correctement au moyen du menu État du réseau. • Vérifiez si le périphérique de stockage USB est connecté au lecteur. • Le périphérique de stockage doit avoir un espace de stockage disponible de 1 Go au moins pour prendre en charge le service BD-LIVE. Vous pouvez vérifier l'espace disponible dans Gestion des données BD.
Avis de conformité et de compatibilité Les disques ne sont pas TOUS compatibles. • Conformément aux limitations décrites ci-dessous et à celles mentionnées ailleurs dans ce guide, y compris dans la section traitant des types de disques et de leurs caractéristiques, les disques qui peuvent être lus sont les suivants : les disques présenregistrés de type commercial BD-ROM, DVD-VIDÉO et Audio CD (CD-DA), BD-RE/-R, DVD-RM/-R et CD-RW/CD-R.
Dénégation de responsabilité relative aux services réseau Tous les contenus et services accessibles au moyen de cet appareil appartiennent à des tiers et sont protégés par des droits d’auteur, des brevets, des marques de commerce et/ou des droits de propriété intellectuelle. De tels contenus et services sont uniquement fournis pour votre usage personnel et non à des fins commerciales.
GARANTIE LIMITEE A L’ACHETEUR INITIAL SAMSUNG ELECTRONICS CANADA INC. (SECA) GARANTIT CE PRODUIT CONTRE TOUT DÉFAUT DE FABRICATION. SECA GARANTIT AUSSI QUE SI CET APPAREIL NE FONCTIONNE PAS CONVENABLEMENT DURANT LA PÉRIODE DE GARANTIE SECA SE RÉSERVERA LE DROIT DE RÉPARER OU DE REMPLACER L’APPAREIL DÉFECTUEUX. TOUTES LES RÉPARATIONS SOUS GARANTIE DOIVENT ÊTRE EFFECTUÉES PAR UN CENTRE DE SERVICE AUTORISÉ SECA.
SIÈGE SOCIAL Samsung Electronics Canada Inc SAMSUNG CANADA INC., 2050 Derry ELECTRONIQUE Rd West 55 STANDISHOn. COURT MISSISSAUGA, Mississauga, L5N 0B9 ONTARIO L5R 4B2 CANADA TEL: TEL: 1-800-SAMSUNG 1-800-SAMSUNG (726-7864) (1-800-726-7864) FAX: (905) 542-1199 WWW.SAMSUNG.COM/CA website: http://www.samsung.