BD-F5500K Blu-ray™ Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Contents SAFETY INFORMATION System Settings......................................... 13 Precautions.................................................. 2 Security Settings........................................ 14 Warning........................................................ 2 Disc Storage & Management........................ 3 Handling Cautions........................................ 3 Using the 3D function................................... 3 Copyright................................................
Region Code Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this player is displayed on the rear panel of the player. Disc Type Region Code Blu-ray Disc B A C 1 DVDVIDEO Area North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
•• Limitations -- Even when a file is encoded by a supported codec listed above, the file might not be played if its content has a problem. -- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted. -- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback. -- The Seek (skip) function is not available if the file’s index table is damaged. -- Depending on your country, RMVB format may not be supported.
Front Panel PLAY/PAUSE BUTTON STOP BUTTON Remote Control Tour of the Remote Control Turn the player on and off. OPEN/CLOSE BUTTON Turn the TV on and off. After setup, allows you to set the input source on your TV. TV volume adjustment. Press to eject a disc. POWER BUTTON Press numeric buttons to operate options. Use to enter the popup menu/title menu. Use to enter the disc menu. Press to search a disc backwards or forwards. Press to pause a disc. Press to skip backwards or forwards.
Connections Connecting to an Audio System Connecting to a TV Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. -- Do not connect the power cord to the wall outlet until you have made all the other connections. -- When you change the connections, turn off all devices before you start. You can connect the Blu-ray player to an audio system using one of the methods illustrated below.
Connecting to a Network Router You can connect your player to your network router using one of the methods illustrated below. To use the DLNA network functionality, you must connect your PC to your network as shown in the illustrations. Wired Network Or Broadband modem (with integrated router) Broadband service Router Broadband modem ✎✎ NOTES Broadband service `` Internet access to Samsung's software update server may not be allowed, depending on the router you use or your ISP's policy.
• Home Menu 3. 6 1 Videos Photos Music Settings 2 5 4 App 1 No Disc App 2 a Change Device App 3 1 Selects Music. 2 Selects Settings. 3 Displays the buttons you can use on the remote to access functions. 4 Selects applications. 5 Selects Videos. 6 Selects Photos. 3 ✎✎ NOTES `` The Videos, Photos, and Music options require that you have an appropriate disc inserted into the player or a USB flash device attached to the player.
✎✎ NOTES `` If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
✎✎ NOTES `` Be sure to select the correct Digital Output or you will hear no sound or just loud noise. `` If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM. `` Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects. `` Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
9. Enter the IP Address, Subnet Mask, and Gateway values in the same way. 10. Press the ▼ button to go to DNS. ✎✎ NOTES `` What is a valid certificate? When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player. 11. Press the ▼ button to go to the first DNS entry field. 12. Enter the numbers as above. 13. Press the RETURN button on your remote. 14.
BD Data Management Enables you to manage the downloaded contents you accessed through a Blu-ray disc that supports the BD-LIVE service and stored on a flash drive. You can check the device’s information including the storage size, delete the BD data, or change the Flash memory device. ✎✎ NOTES `` In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback. `` Your player supports the FAT16, FAT32, and NTFS file systems.
To set Auto Upgrade Notification on, follow these steps: 1. Select Auto Upgrade Notification, and then press the v button. 2. Use the ▲▼ buttons to select On, and then press the v button. If there is a new software version available, the player notifies you with a popup message. 1. To upgrade the firmware, select Yes in the Pop-up. The player turns off automatically, then restarts, and begins the download. (Never turn the player on or off manually during an upgrade.) 2. The update progress popup appears.
8. If necessary, use the ▲▼◄►buttons to select a folder, and then press the v button. 9. Use the ◄►▲▼ buttons to select a file to view or play, and then press the v button. ✎✎ NOTES `` Even though the player will display folders for all content types, it will only display files of the Content Type you selected in Step 6 or Step 6-1. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Home screen and repeating Step 4. 10.
Playback related buttons The player does not play sound in Search, Slow or Step mode. • To return to normal speed playback, press the 6 button. 6 button Starts playback. 7 button Pauses playback. 5 button Stops playback. Fast Motion Play During playback, press the 3 or 4 button. Each time you press the 3 or 4 button, the playback speed will change. Slow Motion Play In pause mode, press the 4 button. Each time you press the 4 button, the playback speed will change.
4. When done, press the v button. 6. To cancel the play list and return to the Home screen, press the RETURN or EXIT button. 5. To change the play list, press the RETURN button to return to the Music List. Repeat Steps 2, 3, and 4. ✎✎ NOTES ✎✎ NOTES `` Depending on the disc or storage device, the Tools menu may differ. `` To enable the background music function, the photo file must be in the same storage media as the music file.
PROBLEM The screen is blank. Forgot password SOLUTION • If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press the @ button (on front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. • When the factory default settings are restored, all stored user BD data is deleted. • Press the @ button (on front panel) for more than 5 seconds with no disc inside.
Repairs If you contact us to repair your player, an administration fee may be charged if either: 1. An engineer is called out to your home at your request and there is no defect in the product. 2. You bring the unit to a repair centre and there is no defect in the product. We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player. We recommend you read this manually thoroughly, search for a solution on line at www. samsung.
• For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Licence • Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • For DTS patents, see http://patents.dts.com. Manufactured under licence from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. 2.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ` Asia Pacific AUSTRALIA NEW ZEALAND CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM ` MENA U.A.
BD-F5500K Blu-ray™ 光碟播放機 使用者手冊 憧憬無數可能 感謝您購買 Samsung 產品。 要獲得更為全面的服務,請在 網站註冊產品 www.samsung.
安全資訊 警告 為減少觸電的危險,請勿卸下機蓋 ( 或後蓋)。 本裝置內部沒有使用者可自行維修的零件。 請讓合格的維修人員進行維修。 注意 注意: 為減少觸電的危險,請勿 卸下機蓋(或後蓋)本裝置內部沒 有使用者可自行維修的零件。 請讓合格的維修人員進行維修。.
12. 只能放在製造商指定 的手推車、座台、 三角架、支架或桌子 上,或者帶裝置一起 出售。 如果使用手 推車,移動手推車/ 裝置組合時要格外小心,避免翻倒損壞。 13. 在雷暴期間或長期不使用時,請拔下此 裝置。 14.
內容 入門指南 安全資訊 系統設置.............................................................. 13 警告.......................................................................... 2 語言....................................................................... 14 預防措施................................................................. 2 光碟儲藏和管理.................................................... 3 處理注意事項........................................................ 3 使用 3D 功能.........................................................
區域代碼 本播放機可以播放的光碟標誌 播放機和光碟都按照地區進行編碼。 這些區域代碼必須相匹配才能播放光碟。 如 果這些區域代碼不匹配,則不能播放光碟。 本播放機的區域代碼在播放機的後面板上顯示。 光碟類型 Blu-ray 光碟 區域代碼 地區 A 北美洲、中美洲、 南美洲、韓國、日 本、台灣、香港和 東南亞。 B 歐洲、格陵蘭、 法國各地區、中 東、非洲、澳大 利亞和紐西蘭。 C DVDVIDEO Blu-ray 光碟 3D Blu-ray 光碟 BD-LIVE DivX • • • • • • • • • 本播放機僅支援 30fps(每秒幀數)的視訊。 本播放機僅支援 USB 大量儲存裝置類別 (MSC) 裝置,例如隨身碟和 USB HDD。(不支援 HUB。) 某些 USB HDD 裝置、多卡讀卡器及隨身碟可能與本播放機不相容。 如果某 USB 裝置需要過多功率,則它可能會受到電路安全裝置的限制。 如果從 USB HDD 播放不穩定,請透過將 HDD 插入到墻上插座來提供額外的電源。如果 問題仍然存在,請與 USB HDD 製造廠商聯絡。 必須使用「安全地卸載 USB」
限制 圖片檔案支援 -- 即使檔案由上方提到的受支援轉碼器編碼,如果其內容有問題,則該檔案也可能無法播放。 -- 如果檔案的容器資訊錯誤或檔案本身損毀,則不能保證可以正常播放。 -- 位元速率/幀速率高於標準的檔案在進行聲音/視訊播放時可能會斷斷續續。 -- 如果檔案的索引表格損壞,搜尋 (跳過) 功能便無法使用。 -- 視國家/地區而定,RMVB 格式可能不受支援。 視訊解碼器 類型 解析度 *.jpg *.jpeg *.jpe JPEG 15360x8640 *.png PNG 15360x8640 AVCHD(先進視訊轉碼器高解像度) -- 最高支援 H.264 Level 4.1和 AVCHD -- 不支援 H.
前面板 遙控器 播放/暫停按鈕 遙控器功能描述 停止 鈕 打開和關閉播放機。 打開和關閉電視。 設定完成後,您就可以在電視上設定輸 入源。 電視音量調節 打開/關閉按鈕 彈出光碟。 電源按鈕 按數字按鈕以操作選項。 用來進入快顯功能表/標題功能表。 使用此按鈕以進入光碟功能表。 按此按鈕以向後或向前搜尋光碟。 按此按鈕以向後或向前跳過。 按此按鈕以停止光碟。 按此按鈕以暫停光碟。 按此按鈕以移至主功能表 按此按鈕以移至主功能表。 麦克风 光碟托盤 USB HOST 遙控器感應器 ✎✎ 附註 使用此按鈕存取光碟 (Blu-ray 光碟/DVD) 上的不同音頻功能。 按此按鈕以切換 Blu-ray 光碟/DVD 的字 幕語言。 按此按鈕以使用「Tools(工具)」功能表。 用來在播放 Blu-ray/DVD 光碟取期間顯 示播放資訊。 用來選取功能表項目並變更功能表值。 `` 播放機顯示 Blu-ray 光碟功能表時,不能透過按播放機或遙控器上的「播放」按鈕來 開始播放影片。 要播放影片,必須在光碟功能表中選取「播放影片」或「開始」,然 後按 v 按鈕。 `` 使用 U
連接 連接到音訊系統 連接到電視 將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到電視的 HDMI IN 插孔。 -- 在連接好所有接線之前,不要將電源線連接至牆上插座。 -- 當您變更連線時,請先關閉所有裝置再開始。 您可以使用下面說明的其中一種方法,將 Blu-ray 播放機連接到音訊系統。 -- 在連接好所有接線之前,不要將電源線連接至牆上插座。 -- 當您變更連線時,請先關閉所有裝置再開始。 方法 1 連接到支援 HDMI 的 AV 接收器 • 將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到接收器的 HDMI IN 插孔。 • 最佳品質(建議) 方法 2 連接到具有 Dolby Digital 或 DTS 解碼器的 AV 接收器 音訊 視訊 ✎✎ 附註 `` 如果使用 HDMI 至 DVI 電纜來連接到顯示裝置,則您還必須將播放機上的 Digital Audio Out 連接至音訊系統才能聽到音訊。 `` HDMI 電纜輸出數位視訊和音訊,因此不需要連接音訊電纜。 `` 視您的電視而定,某些 HDMI 輸出解像度可能不起作用。請參閱電視的使用手冊。 `` 當使用
連接到網路路由器 您可以使用下面說明的其中一種方法,將本播放機連接到網路路由器。 若要使用 DLNA 網路功能,必須按圖中所示將電腦連接到網路。 有線網路 寬頻數據機 (含有整合式路由器) 設定 初始設定程序 • 如果未配置初始設定,則除了下面說明 的情況之外,主功能表不會出現。 • 升級軟體版本後,本播放機中的 OSD (螢幕顯示)可能會變更。 • 存取步驟可能會因選定的功能表而異。 • 此產品的載入程序完成之後, 可以操作 面板按鈕和遙控器。 寬頻服務 在將播放機連接至電視之後,開啟電視和播 放機。 第一次開啟播放機時,播放機的「初 始設定」畫面會出現在電視上。 「初始設 定」程序可讓您設定螢幕顯示 (OSD) 和功能 表語言、畫面比例(螢幕尺寸)、網路類型 以及將播放機連接至網路。。 或 路由器 `` 如果您要使用 Anynet+(HDMI-CEC) 功能,請依照下面的說明操作。 1) 使用 HDMI 電纜線將播放機連接 至 Anynet+(HDMI-CEC) 相容 Samsung 電視。 2) 在電視和播放機上將 Anynet+(HDMICEC) 功能設定為「開」。 3) 將電視設定為
3. • 主功能表 6 影片 相片 音樂 1 4. 2 5. 設定 5 按下 ▲▼ 按鈕以選取所需的子功能表, 然後按 v 按鈕。 電視外觀比例 按下 ▲▼ 按鈕以選取所需的項目,然後 按 v 按鈕。 視您電視的類型而定,您可能要調校屏幕大 小設定。 按 EXIT 按鈕結束功能表。 ✎✎ 附註 4 App 1 沒有光碟 App 2 App 3 a 變更裝置 App 4 d 檢視裝置 1 選取音樂 。 2 選取設定。 3 顯示可以使用的按鈕。 4 選取應用程式 。 5 選取影片。 6 選取相片。 " 確認 3 ✎✎ 附註 `` 視訊、相片 和 音樂 選項需要您將相 應的光碟放入播放機中,或將 USB 快 閃裝置連接到播放機。 存取設定功能表 若要存取「設定」功能表或子功能表,請依 照下面的步驟操作: 1. 2.
✎✎ 附註 `` 如果連接至播放機的電視不支援電影幀 或選取的解 析度,訊息「如果在選取 「是」之後沒有顯示圖片,請等待 15 秒以恢復為之前的解析度。 您要變更解 析度嗎?」將會出現。如果選取是,電 視的螢幕空白 15 秒鐘,然後解析度將 自動恢復為先前的值。 `` 如果在變更解析度之後保留空白,請取 出所有光碟,然後按住播放機前面的播 @ 按鈕 5 秒鐘以上。 所有設定將恢複為 出廠預設值。 遵循上一頁中的步驟訪問 每種模式並選取電視將支援的顯示設定。 漸進模式 數碼輸出選取 可讓您改善觀賞 DVD 時的畫面品質。 設定 音頻 卡拉 OK 分數 `` 恢復出廠預設設定後,將會刪除所有已 儲存的使用者 BD 資料。 `` Blu-ray 光碟必須具有 24 幅率功能才能 使用電影幀幅 (24Fps) 模式。 ✎✎ 附註 將電影幀幅 (24Fps) 功能設定為自動可讓您 將播放機的 HDMI 輸出調整為每秒 24 幀以改 善畫質。 只能在支援此幅率的電視上享受電影幀 幅 (24Fps) 功能。 只有播放機處於 HDMI 1080p 輸出解析度模式時,才能選取電影幀。 HDMI 色彩格式 可讓您
✎✎ 附註 `` 請務必選取正確的 Digital Output, 否則將聽不到聲音或只聽到很大聲的 雜音。 `` 如果 HDMI 裝置(AV 接收器,電 視)與壓縮的格式 (Dolby digital, DTS) 不相容,則音訊信號輸出為 PCM。 `` 一般 DVD 沒有 BONUSVIEW 音訊和 Navigation Sound Effects(導覽音效)。 `` 一些 Blu-ray 光碟沒有 BONUSVIEW 音訊和 Navigation Sound Effects (導覽音效)。 `` 如果播放 MPEG 音訊聲道,則音訊 訊號將輸出為 PCM,而不管 Digital Output Selections 設為什麼 (PCM 或 Bitstream)。 `` 如果您的電視與壓縮多聲道格式 (Dolby Digital, DTS) 不相容,則播 放機可能會輸出 PCM 2 聲道向下採 樣的音訊,即使將在設定功能表上 選取了 Bitstream (Re-encoded 或 Unprocessed) 也是如此。 `` 如果您的電視與超過 48kHz 的 PCM 採樣不相容,則播放機可能會輸出 48kH
9. 輸入 IP 地址, 子網路遮罩 和 閘道 的值。 ✎ 附註 10. 按下 ▼ 按鈕移至 DNS。 12. 按照以上所述輸入數字。 `` 甚麼是有效的證書? 當播放機使用 BD-LIVE 來將光碟資料 和要求傳送至伺服器以認證光碟時, 伺服器使用所傳送的資料來檢查該光 碟是否有效,並將證書傳回給產品。 14. `` 使用 BD-LIVE 內容時,網際網路連線 可能會受到限制。 11. 按下 ▼ 按鈕移至第一個 DNS 輸入欄位。 13. 按下遙控器上的 RETURN 按鈕。 執行網路測試,確保播放機已連線至 網路 。 網路測試 使用 BD-LIVE™ 使用此選單可以連線至有線網路,或檢查您 的網路連線是否正確。 將播放機連接到網路後,您可以使用 BDLIVE 相容光碟享受各種與電影相關的服務內 容。 網絡狀態 1.
BD 資料管理 安全性 一般 若要使用 從USB下載 來升級,請依照下面 的步驟操作: 時區 可讓您管理下載的內容,這些內容透過支援 BD-LIVE 服務的 Blu-ray 光碟存取,並儲存 在連接的快閃記憶體裝置上。 可以檢查裝置資訊(包括儲存媒體大小)、 刪除 BD 資料或變更快閃記憶體裝置。 預設 PIN 是 0000。如果您尚未建立您自己的 PIN,請輸入預設 PIN 以存取安全功能。第一 次存取安全功能之後,可以使用「變更 PIN 碼」功能來變更 PIN。 ✎ 附註 除非輸入密碼,否則禁止播放特定年齡等級 的 Blu-ray 光碟。 軟件升級 DVD 家長分級控制 「軟體升級」功能表可讓您升級播放機的軟 體以改良效能或取得其他服務。 您可以採用 四種方法來升級: `` 在外部記憶體模式中,如果在播放期 間斷開 USB 裝置的連接,光碟播放 將會停止。 `` 本播放機支援 FAT16、FAT32 和 NTFS 檔案系統。 建議使用支援 USB 2.
若要將 自動升級通知 設定為 開,請執行下 列步驟: 聯絡 Samsung 1. 選取 自動升級通知,然後按 v 按鈕。 提供聯絡資訊以協助您使用播放機。 2. 使用 ▲▼ 按鈕選取 開啟,然後按 v 按鈕。 如果有新的軟體版本可用,播放機會透過快 顯訊息通知您。 1. 2. 3. 若要升級韌體,請在快顯訊息上選取 是。產品將自動關閉,然後重新啟動, 接 著開始下載。 (此時切勿手動打開產品。) 將顯示更新進度彈出式訊息。 更新完成後,播放機會自動重新啟動。 ✎ 附註 `` 播放機關閉然後再次自行開啟後,升 級即告完成。 `` 在執行更新程序期間,切勿手動關閉 或開啟播放機。 `` 對於在軟體升級期間,由於網際網路 連 線不穩定或消費者的疏忽而導致的 播放機故障,Samsung Electronics 不承擔任何法律責任。 服務合約條款 查看有關第三方的內容及服務的一般性 免責聲明。 媒體播放 播放商業錄製的光碟 影片 1. 2. 3.
8. 播放具有使用者錄製的內容的光碟 必要時,使用 ▲▼◄► 按鈕選取資料 夾,然 後按 v 按鈕。 9. 使用 ▲▼◄► 按鈕選取要觀看或播放的 檔 案,然後按 v 按鈕。 ✎✎ 附註 `` 雖然播放機可以顯示所有內容類型的 資料夾,但是 它僅顯示您在步驟 6 或 6-1 中選取之內容類型的檔案。例 如,如果您選取了音樂,您只能看到 音樂檔案 您可以透過回到 Home(首 頁)畫面並重複步驟 4 來變更此選項。 10. 按 RETURN 按鈕一次以上結束目前的 畫面、結束資料夾或回到 首頁 畫面。 按 EXIT 按鈕以直接回到 首頁 畫面。 您可以播放您錄製在 Blu-ray、DVD 或 CD 光碟 上的多媒體檔案。 1. 2.
與播放相關的按鈕 在「搜尋 」、「慢動作播放」和「逐個動 作播放」模式下,播放機不會播放聲音。 • 要恢復正常速度播放,請按 6 按鈕。 6 按鈕 開始播放。 5 按鈕 停止播放。 7 按鈕 暫停播放。 快動作播放 在播放期間,按 3 或 4 按鈕。 每次按 3 或 4 按鈕,播 放速度都會變更。 慢動作播放 在暫停模式中,按 4 按鈕。 每次按 4 按鈕按鈕,播放 速度都會變更。 在暫停模式中,按 7 按鈕。 逐個動作播放 每次按 7 按鈕,都會出現 新的一幀。 在暫停模式中,按 1 或 2 按鈕。 跳過動作播放 每次按 1 或 2 按鈕,光 碟都會移至上一個章節/檔 案或下一個章節/檔案。 使用光碟功能表、標題功能表、快顯 功能表和標題清單 DISC MENU 按鈕 在播放期間,按此按鈕可 以啟動光碟功能表功能。 TITLE MENU 在播放期間,按此按鈕可 按鈕 以啟動標題功能表功能。 POPUP MENU 按鈕 在播放期間,按此按鈕可以 啟動快現標題功能表功能。 控制音樂播放 4 快速播放(僅限音訊 CD (CD-DA)) 在播放期間,按 3 或 4 按鈕。 每次按
4. 完成後,按 v 按鈕。 5. 若要變更播放清單,請按 RETURN 按 鈕回到 音樂清單。 重複步 驟 2、 3 和 4。 6. 若要取消播放清單並返回到 首頁 畫 面,請按 RETURN 或 EXIT 按鈕。 ✎✎ 附註 `` 可以在音訊 CD (CD-DA) 上建立最多 含有 99 個曲目的播放清單。 `` 如果您移除播放清單中的所有曲目, 然後按 v 按鈕,則播放機會列出並 播放光碟上的所有曲目。 播放相片內容 您可以播放位於 BLU-RAY 、DVD、CD 、 USB 儲存裝置上的相片內容 或 選取 PC。 使用工具功能表 在播放期間,按 TOOLS 按鈕。.
問題 屏幕訊號中斷 。 忘記密碼 。 解決方案 問題 • 如果將 HDMI 輸出設定為電視不能支援的解析度(例如 1080p),則在電視 上可能看不到圖片。 • 在內部無光碟的情況下,@ 按鈕(在前面板上)超過 5 秒鐘。 所有設定將恢 復為出廠設定。 • 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。 DLNA 功能 • 在內部無光碟的情況下,@ 按鈕(在前面板上)超過 5 秒鐘。 所有的設定, 包括密碼,將恢復為出廠設定。 除非絕對必要,否則不要使用此操作。 • 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。 畫面出現噪訊或失真 • 請確定光碟未弄髒或無刮痕。 • 清潔光碟。 無 HDMI 輸出。 • 檢查電視與播放機的 HDMI 插孔之間的連接。 • 檢查電視是否支援 480p、720p、1080i、1080p HDMI 輸入解析度。 異常 HDMI 輸出屏幕。 • 如果畫面上出現雪花噪訊,則表示電視不支援 HDCP(高頻寬數碼內容保護) 。 如果您遇到其他問題。 • 移到目錄,查找含有對當前問題解釋的使用手冊部分,然後再次遵照程序操作。 • 如果
維修 符合性和相容性聲明 如果您要與我們聯絡以維修播放機,則在下列情況下可能需要收取管理費: 並非所有光碟都相容 1. 您致電工程師上門維修,但是產品無缺陷。 2. 您將裝置帶到維修中心維修,但是產品無缺陷。 我們在上門服務或開始修理播放機之前,我們將為您提供管理費用。 建議您通讀本使用手冊,在 www.samsung.com 上線上搜尋解決方案,或者與 Samsung 客 戶中心聯絡,再將播放機送修。 規格 尺寸 360 (寬) x 196 (深) x 39 (高) 毫米 工作溫度範圍 +5℃ 至 +35℃ 工作濕度範圍 10 % 至 75 % 類型 A USB 2.0 DC 輸出。 最大 5V 0.
• 對於 Blu-ray 光碟播放機前進式掃描輸出: 消費者應該注意到,並非所有高清晰度電視都 與本產品完全相容,可能會導致畫面中顯示偽影。 如果出現逐行掃描畫面問題,建議使用 者將連線切換為 「標準清晰度」輸出。 如果您有關於我們的電視與本產品相容性的問題,請聯絡我們的客 戶服務中心。 複製保護 • 因為已核准將 AACS(進階儲存內容系統)用作 Blu-ray 光碟格式的內容保護系統(類似 於對 DVD 格式使用 CSS(內容加擾系統)),對受 AACS 保護的內容存在播放、類比信 號輸出等特定限制。 本產品的操作和對本產品的限制可能會因購買時間而異,因為在生產本產品之後,AACS 可能會採用及/或變更這些限制。 此外,BD-ROM 標記和 BD+ 另用作 Blu-ray 光碟格式的 內容保護系統,它施加特定限制,包括對 BD-ROM 標記及/或 BD+ 受保護內容的播放限 制。 若要取得 AACS、BD-ROM 標記、BD+ 或本產品的相關詳細資訊,請與 SAMSUNG 客戶中心聯絡。 • 許多 Blu-ray/DVD 都進行了編碼以達到複製保護的目的。 因此,僅直接將您的播放機與您 的電視相連接,而
授權 • 在 Dolby Laboratories 的授權下製造。 Dolby 和雙 D 標誌是 Dolby Laboratories 的商標。 • 如需 DTS 專利資訊,請造訪 http://patents.dts.com。在取得 DTS Licensing Limited 授權的條件下製造。 DTS、符號及 DTS 和符號一起是 DTS, Inc. 的註冊商標,並且 DTS 2.0+Digital Out 是 DTS, Inc. 的商標。© DTS, Inc. 保留 所有權利。 2.0+Digital Out • DivX -- 關於 DIVX 視訊: DivX® 是 Rovi Corporation 子公司 DivX, LLC 建立 的數位視訊格式。 本產品是正式通過 DivX 認證的產品,它已通過嚴 格的測試,證明它可以播放 DivX 視訊。 請造訪 divx.
聯絡 SAMSUNG WORLD WIDE 如果您有任何關於 Samsung 產品的問題或意見,請聯絡 SAMSUNG 客戶服務中心。 Area ` Asia Pacific AUSTRALIA NEW ZEALAND CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM ` MENA U.A.