Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comuníquese con SAMSUNG WORLD WIDE Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG. Country Customer Care Center Web Site ARGENTINA 0800-333-3733 www.samsung.com/ar BRAZIL 0800-124-421 4004-0000 www.samsung.com/br CHILE 800-SAMSUNG(726-7864) www.samsung.
❑ Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen ● Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
English Contents Picture Control General Information ■ List of Features......................................................................2 ■ Accessories...........................................................................2 ■ Viewing the Control Panel.....................................................3 ■ Viewing the Connection Panel...............................................4 ■ Remote Control.....................................................................
General Information N Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice in order to enhance product performance. ¦ List of Features ● ● ● ● ● Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer.
¦ Viewing the Control Panel N The product color and shape may vary depending on the model. N The front panel buttons can be activated by touching them with your finger. 8 8 1 2 3 4 5 6 7 1 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV. 2 SOURCEE: Toggles between all the available input sources. In the on-screen menu, use this button as you use the ENTERE button on the remote control. 3 y: Press to increase or decrease the volume.
¦ Viewing the Connection Panel [TV Rear Panel] 1 9 2 3 5 4 8 7 6 0 N The product color and shape may vary depending on the model. 1 PC/DVI AUDIO IN – Connect to the audio output jack on your PC. – DVI audio outputs for external devices. 2 ANT IN – Connects to an antenna or cable TV system. 3 SERVICE – Connector for software upgrades. 4 HDMI (DVI) IN – Connects to the HDMI jack of a device with an HDMI output. N No sound connection is needed for an HDMI to HDMI connection.
H (HEADPHONE) – Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. N Using the sound function is restricted when connecting headphones to the TV. N Prolonged use of headphones at a high volume may damage your hearing. N You will not hear sound from the speakers when you connect headphones to the TV. N The headphone volume and TV volume are adjusted separately.
¦ Remote Control N You can use the remote control up to a distance of about 23 feet from the TV. N The performance of the remote control may be affected by bright light. N The product color and shape may vary depending on the model. 1 1 POWER: Turns the TV on and off. 2 NUMERIC BUTTONS: Press to change the channel. 3 _: Press to select additional channels (digital) being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press _ and ‘3’.
Connections ¦ Connecting VHF and UHF Antennas If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300 Ω Flat Twin Leads’ below. If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω Round Leads’. If you have two antennas, see ‘Separate VHF and UHF Antennas’.
Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.) ANT IN Incoming cable TV Rear Splitter RF (A/B) Switch Cable Box 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
¦ Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI This connection can only be made if there is a DVI Output connector on the external device. TV Rear Panel DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) 2 Audio Cable (Not supplied) 1 DVI to HDMI Cable (Not supplied) 1.
¦ Connecting a VCR TV Rear Panel VCR Rear Panel 2 Audio Cable (Not supplied) 1 Video Cable (Not supplied) 1. Connect a Video Cable between the AV IN [Y/VIDEO] jack on the TV and the VIDEO OUT jack on the VCR. 2. Connect Audio Cables between the AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR. N If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the ‘R’ jack.
¦ Connecting a Camcorder Using a Video Cable TV Rear Panel Camcorder 2 Audio Cable (Not supplied) 1 Video Cable (Not supplied) 1. Connect a Video Cable between the COMPONENT IN / AV IN [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder. 2. Connect Audio Cables between the COMPONENT IN / AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder. N Each Camcorder has a different back panel configuration.
¦ Connecting a PC Using a D-Sub Cable TV Rear Panel PC 2 PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) 1. Connect a D-Sub Cable between PC IN connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between the PC/DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your computer. N When connecting a PC, match the color of the connection terminal to the cable. Using an HDMI/DVI Cable TV Rear Panel PC 2 3.
Operation ¦ Viewing the menus Button MENUm RETURN R EXIT e Operations Display the main on-screen menu. Return to the previous menu. Exit the on-screen menu. Button ▲/▼/◄/►/ ENTERE Picture Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions. 1. Press the MENU button. The main menu is displayed on the screen. Its left side has the following icons: Picture, Sound, Channel, Setup, Input, Support. 2.
¦ Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. Plug & Play 1. Press the POWER P button on the remote control. Select Language of the OSD. N You can also use the POWER P button on the TV. Language : English ► N The message Select Language of the OSD. is displayed. E Enter 2. Press the ▲ or ▼ button to select the language, then press the ENTERE button. The message Select ‘Home Use’ when installing this TV in your home. is displayed. 3.
Channel Control ¦ Configuring the Channel Menu ❑ Antenna → Air / Cable Channel Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). T Press the TOOLS button to display the Tools menu. You can also set the Antenna by selecting Tools → Switch to Cable (or Switch to Air).
Programmed Shows all current reserved Programs. N Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel. N Using the Color buttons with the Channel List – Green (Zoom): Enlarges or shrinks a channel number. – Yellow (Select): Selects multiple channel lists. You can perform the add / delete or add to Favorite / delete from Favorite function for multiple channels at the same time.
Channel List Option Menu (in Programmed) 1 / 1 / 2009 Programmed You can view, modify or delete a reservation. N Press the TOOLS button to use the option menu. Change Info 9:08 am 5 TV1 Select to change a viewing reservation. 3:15 pm 2 TV3 5:50 pm 2 TV3 Zoom Select Cancel Schedules Change Info M.E Quincy, Cancel Schedules The Equalizer Information McMillan & Wife Select All Select to cancel a viewing reservation.
Dynamic Contrast → Off / Low / Medium / High You can adjust the screen contrast so that the optimal contrast is provided. Gamma You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3) Color Space Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color. ● Native: Native Color Space offers deep and rich color tone.
N Temporary image retention may occur when viewing a static image on the set for more than two hours. N After selecting Zoom1, Zoom2 or Wide Fit: Press the ◄ or ► button to select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up and down. N After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode, you made need to center the picture: Press the ◄ or ► button to select Position, then press the ENTERE button. Press the ▲, ▼, ◄ or ►button to move the picture.
Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
Sound Control ¦ Configuring the Sound Menu You can select a sound mode to suit your personal preferences. Sound ❑ Mode → Standard / Music / Movie / Clear Voice / Custom Mode : Custom ► Equalizer ❑ Equalizer The sound settings can be adjusted to suit your personal preference. Mode Selects the sound mode among the predefined settings.
❑ Speaker Select When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater’s (external) speakers. External Speaker: Used to listen to the sound of the External (Home Theater) Speakers. TV Speaker: Used to listen to the sound of the TV Speakers. N If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
Timer 1 / Timer 2 / Timer 3 Three different on / off timer settings can be made. You must set the clock first. ● On Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) ● Off Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) ● Volume: Set the desired volume level. ● Antenna: View antenna type.
MPAA Rating You can block movies depending on their MPAA rating. The Motion Picture Association of MPAA Rating America(MPAA) has implemented a rating system that provides parents or guardians with G advance information on which films are appropriate for children. PG Allow All ● G: General audience (no restrictions). PG-13 Block All R ● PG: Parental guidance suggested. NC-17 ● PG-13: Parents strongly cautioned. X ● R: Restricted. Children under 17 should be accompanied by an adult.
❑ Caption (On-Screen Text Messages) Caption → Off / On You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. O Press the CC button on the remote control to turn the Caption on or off. N The Caption feature doesn’t work in Component, HDMI or PC modes. Caption Mode You can select the desired caption mode. N The availability of captions depends on the program being broadcast.
Input / Support ¦ Configuring the Input Menu Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. O Press the SOURCE button on the remote control to view an external signal source. Input ❑ Source List Source List Edit Name TV / AV / Component / PC / HDMI/DVI N You can choose only those external devices that are connected to the TV.
❑ Software Upgrade Samsung may offer upgrades for TV’s firmware in the future. Please visit Samsung.com or contact the Samsung call center to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the SERVICE port located on your TV. N Insert a USB drive containing the firmware upgrade into the SERVICE port on the side of the TV. N Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied.
Appendix ¦ Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, please visit Samsung.com or contact the Samsung call center. Problem Possible Solution Poor picture. Try another channel. / Adjust the antenna. / Check all wire connections. Poor sound quality. Try another channel. / Adjust the antenna. No picture or sound. Try another channel. / Press the SOURCE button. Make sure the TV is plugged in.
Problem Possible Solution The picture appears distorted in the corner of the screen. If Screen Fit is selected with some external devices, the picture may appear distorted in the corner of the screen. This symptom is caused by the external devices, not TV. The ‘Resets all settings to the default values.’ message appears. This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults.
¦ Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. N Standard dimensions for wall mount kits are shown in the table above. N When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
¦ Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Install the product so the required distances shown in the figure are kept. N When using a stand or wall-mount, use parts provided by Samsung Electronics only.
¦ Specifications Model Name LN22B350 Screen Size (Diagonal) 22 inches PC Resolution (Optimum) 1360 x 768 @ 60Hz Sound (Output) 3W x 2 Dimensions (WxDxH) Without Stand 21,9 x 3,5 x 15,3 inches (557,5 x 88,8 x 387,7 mm) 21,9 x 8,0 x 16,7 inches (557,5 x 202,5x 424,8 mm) With stand Weight Without Stand With Stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 8,4 Ibs (3,8 kg) 8,8 Ibs (4,0 kg) 50°F to 104°F (10°C to 40°C) 10% to 80%, non-con
This page is intentionally left blank. BN68-01975M_00L02.
❑ Precauciones al mostrar en la pantalla una imagen fija La imagen fija puede causar daños permanentes en la pantalla del televisor. ● No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de brillo y de contraste de la pantalla cuando muestre imágenes fijas.
Contenido Control de la imagen Información General ■ Listado de características......................................................2 ■ Accesorios.............................................................................2 ■ Aspecto general del panel de control....................................3 ■ Aspecto general del panel de conexiones.............................4 ■ Mando a distancia.................................................................6 ■ Instalación de las pilas en el mando a distancia.
Información General N Las ilustraciones de este manual se proporcionan sólo como referencia y pueden ser diferentes del producto real. El diseño y las especificaciones del producto se pueden cambiar sin previo aviso para mejorar el rendimiento del producto. ¦ Listado de características ● ● ● ● ● Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. Temporizador automático para encender o apagar el televisor. Temporizador de desconexión especial.
¦ Aspecto general del panel de control N El color y la forma del producto pueden variar según el modelo. N Los botones del panel frontal se pueden activar al tacto. 8 8 1 2 3 4 5 6 7 1 SENSOR DEL MANDO A DISTANCIA: Dirija el mando a distancia hacia este punto del TV. 2 SOURCEE: Cambia entre todas las fuentes de entrada disponibles. En el menú de la pantalla, utilice este botón del mismo modo que el botón ENTERE del mando a distancia. 3 y: Púlselos para subir o bajar el volumen.
¦ Aspecto general del panel de conexiones [Panel posterior del TV] 1 9 2 3 5 4 8 7 6 0 N El color y la forma del producto pueden variar según el modelo. 1 PC/DVI AUDIO IN – Se conecta al terminal de salida de audio del PC. – Salidas de audio DVI para dispositivos externos. 2 ANT IN – Permite conectar a una antena o un sistema de TV por cable. 3 SERVICE – Conector para la actualización del software. 4 HDMI (DVI) IN – Permite conectar al terminal HDMI un dispositivo que tenga salida HDMI.
7 H (AURICULARES) – Los auriculares pueden estar conectados a la salida de auriculares del aparato. Cuando los auriculares están conectados, se desactiva el sonido de los altavoces incorporados. N El uso de la función de sonido está restringido cuando se conectan auriculares al televisor. N El uso prolongado de los auriculares a un volumen alto puede dañar los oídos. N No recibirá sonido de los altavoces cuando conecte los auriculares al televisor.
¦ Mando a distancia N Puede utilizar el mando a una distancia del televisor de hasta 7 metros. N El exceso de luz puede influir en el rendimiento del mando a distancia. N El color y la forma del producto pueden variar según el modelo. 1 POWER: Enciende o apaga el TV. 2 BOTONES NUMÉRICOS: Permiten cambiar de canal. 3 _: Pulse este botón para seleccionar canales adicionales (digitales) emitidos por la misma emisora. Por ejemplo, para seleccionar el canal ‘54-3’, pulse ‘54’, _ y ‘3’.
Conexiones ¦ Conexión de antenas de VHF y UHF Si su antena tiene un conjunto de cables con este aspecto, consulte ‘Antenas de par de cables planos de 300 Ω’ a continuación. Si la antena tiene un cable como el que se muestra en el diagrama de la derecha, consulte ‘Antenas con cables coaxiales de 75 ohmios’. Si dispone de dos antenas, consulte ‘Antenas de VHF y UHF independientes’.
Conexión a un decodificador que decodifica algunos canales Si su decodificador sólo decodifica algunos canales (como los canales de pago), siga las instrucciones siguientes. Necesitará un divisor de dos vías, un conmutador de RF (A/B) y cuatro largos de cable RF. (Estas opciones se encuentran en la mayoría de tiendas de electrónica.) ANT IN Cable de entrada Parte posterior del televisor Divisor Conmutador RF (A/B) Servicio de cable 1.
¦ Conexión de un reproductor de DVD / Blu-ray / receptor por cable / satélite (decodificador) a través de DVI Solo es aplicable si hay un conector de salida de DVI en el dispositivo externo. Panel posterior del TV Reproductor DVD / Blu-ray / Receptor por cable / satélite (decodificador) 2 Cable de audio (no incluido) 1 Cable DVI a HDMI (no incluido) 1.
¦ Conexión de un reproductor de vídeo Panel posterior del TV Panel posterior del VCR 2 Cable de audio (no incluido) 1 Cable de vídeo (no incluido) 1. Conecte un cable de vídeo entre el terminal AV IN [Y/VIDEO] del televisor y el terminal VIDEO OUT del aparato de vídeo. 2. Conecte los cables de audio entre los terminales AV IN [R-AUDIO-L] del televisor y los terminales AUDIO OUT del aparato de vídeo.
¦ Conexión de una videocámara Uso de un cable de vídeo Panel posterior del TV Videocámara 2 Cable de audio (no incluido) 1 Cable de vídeo (no incluido) 1. Conecte un cable de vídeo entre el terminal COMPONENT IN / AV IN [VIDEO] del televisor y el terminal VIDEO OUT de la videocámara. 2. Conecte los cables de audio entre los terminales COMPONENT IN / AV IN [VIDEO] del televisor y los terminales AUDIO OUT de la videocámara. N Cada videocámara tiene una configuración distinta en el panel posterior.
¦ Conexión a un PC Uso de un cable D-Sub Panel posterior del TV PC 1 Cable D-Sub (no incluido) 2 Cable de audio de PC (no incluido) 1. Conecte un cable D-Sub entre el conector PC IN del televisor y el conector de salida de PC del ordenador. 2. Conecte un cable de audio PC entre el terminal PC/DVI AUDIO IN del televisor y el terminal de salida de audio de la tarjeta de sonido del ordenador. N Cuando conecte un PC, debe hacer coincidir los colores del terminal de conexión y del cable.
Funcionamiento ¦ Visualización de los menús Botón MENU m RETURN R EXIT e Función Muestra el menú de pantalla principal. Volver al menú anterior. Salir del menú en pantalla. Botón ▲/▼/◄/►/ ENTERE Imagen Antes de usar el televisor, siga los pasos detallados a continuación para saber cómo desplazarse por los menús para seleccionar y ajustar las funciones. 1. Pulse el botón MENU. En la pantalla aparece el menú principal.
¦ Función Plug & Play Cuando se enciende el televisor por primera vez, se configuran seguidos y automáticamente Plug & Play dos ajustes básicos del usuario. Select Language of the OSD. 1. Pulse el botón POWER P del mando a distancia. Menu Language : English ► N También puede usar el botón POWERP del televisor. E Enter N Aparece el mensaje Select Language of the OSD.. 2. Pulse el botón ▲ o ▼ para seleccionar el idioma y, a continuación, pulse el botón ENTERE.
Control de los canales ¦ Configuración del menú de canales ❑ Antena → Aire / Cable Canal Antes de empezar a memorizar los canales disponibles, debe indicar el tipo de origen de la señal conectada al TV (es decir, antena o sistema de cable). T Pulse el botón TOOLS para ver el menú Herramientas. También puede configurar la antena con Herramientas → Cambiar a Cable (o Cambiar a Aereos). Antena : Aire ► Prog. Auto Borrar canal encriptado Lista de canales ❑ Prog.
Grabación con temporizador Muestra todos los programas actualmente reservados. N Seleccione un canal en la pantalla Todos los canales, Canales agregados o Favoritos pulsando los botones ▲ / ▼ y pulse el botón ENTERE. A continuación puede ver el canal seleccionado. N Uso de los botones de colores en la lista de canales – Verde (Zoom): Amplía o disminuye el número del canal. – Amarillo (Selección): Selecciona varias listas de canales.
Menús de opciones de la lista de canales (en Grabación con temporizador) Cambiar información Selecciónelo para cambiar la reserva de visualización. Cancelar programaciones Grabación con temporizador Se puede ver, cambiar o borrar una reserva. N Pulse el botón TOOLS para usar el menú de opciones. 1 / 1 / 2009 informaciónM.
Contraste Dinám. → Apagado / Bajo / Medio / Alto Se puede ajustar el contraste de la pantalla para conseguir un contraste óptimo. Gamma Se puede ajustar la intensidad de los colores primarios (rojo, verde y azul). (-3 ~ +3) Espacio de color El espacio de color es una matriz compuesta por los colores rojo, verde y azul. Seleccione su espacio de color favorito y disfrute de unos colores auténticamente naturales. ● Nativo: El espacio de color nativo proporciona tonos de color profundos y ricos.
N Puede producirse una retención temporal de imagen cuando se ve una imagen estática durante más de dos horas. N Después de seleccionar Zoom1, Zoom2 o Ajuste ancho: Pulse el botón ◄ o ► para seleccionar Posición y, a continuación, pulse el botón ENTERE. Pulse los botones ▲ o ▼ para desplazar la imagen hacia arriba o hacia abajo.
Modos de pantalla Si la señal del sistema es igual al modo de señal estándar, la pantalla se ajusta automáticamente. Si la señal del sistema no es igual al modo de señal estándar, ajuste el modo consultando la guía del usuario de la tarjeta de vídeo; de lo contrario, puede no haber señal de vídeo. La imagen de pantalla se ha optimizado durante la fabricación para los modos de visualización enumerados a continuación.
Control de sonido ¦ Configuración del menú de sonido Puede seleccionar el modo de sonido que se ajuste a sus preferencias personales. Sonido ❑ Modo → Normal / Música / Cine / Voz clara / Favorito Modo : Favorito ► Ecualizador ❑ Ecualizador Es posible ajustar los parámetros del sonido según sus preferencias personales. Modo Selecciona el modo de sonido entre los valores predefinidos. Trusurround SRS HD : Apagado Idioma preferido : Inglés Sonido Multi-track : Mono Vol.
❑ Seleccionar altavoz Cuando se ve el televisor conectado a un sistema Home Cinema, se debe apagar el altavoz del televisor para que la salida de audio del televisor utilice los altavoces del Home Cinema (externos). Altavoz externo: Utiliza los altavoces externos (Home Cinema) para la salida del sonido. Altavoz de TV: Utiliza los altavoces del TV para la salida del sonido. N Si selecciona Altavoz externo en el menú Seleccionar altavoz, se limita la configuración del sonido.
Temporizador 1 / Temporizador 2 / Temporizador 3 La activación y desactivación del temporizador se puede configurar de tres maneras. Debe ajustar el reloj en primer lugar. ● Hora de encendido: Ajuste la hora, los minutos, am/pm y activar/desactivar. (Para activar el temporizador con la configuración deseada, establézcalo en Activar.) ● Hora de apagado: Ajuste la hora, los minutos, am/pm y activar/desactivar. (Para activar el temporizador con la configuración deseada, establézcalo en Activar.
Clas. MPAA Clas. MPAA Puede bloquear las películas según su clasificación. La Asociación americana de cinematografía (MPAA) ha creado un sistema de clasificación que proporciona a padres y G tutores información sobre qué películas son apropiadas para los niños. PG Perm. todo ● G: Todos los públicos (sin restricciones). PG-13 Bloq. todo R ● PG: Se sugiere la compañía de un adulto. NC-17 ● PG-13: Menores acompañados de un adulto. X ● R: Restringido.
❑ Subtítulo (mensajes de texto en pantalla) Subtítulo → Apagado / Encendido Puede activar o desactivar la función de subtítulos. Si los subtítulos no están disponibles, no se mostrarán en la pantalla. O Pulse el botón CC del mando a distancia para activar o desactivar la función de subtítulos. N La función de subtítulos no está disponible en los modos Componente, HDMI ni PC. Modo de Subtítulo Puede seleccionar el modo de subtítulo deseado.
Entrada / Soporte técnico ¦ Configuración del menú de entrada Utilice este menú para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD / Blu-ray / receptores de cable y satélite (decodificadores), conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. O Pulse el botón SOURCE del mando a distancia para ver una fuente de señal externa.
❑ Actualización del software Samsung puede ofrecer actualizaciones para el firmware del televisor en el futuro. Visite Samsung.com o póngase en contacto con el centro de llamadas de Samsung para recibir información acerca de la descarga de las actualizaciones y del uso de una unidad USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto SERVICE situado en el televisor.
Apéndice ¦ Identificación de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguno de los consejos funciona, visite Samsung.com o póngase en contacto con el centro de llamadas de Samsung. Problema Posible Solución Imagen deficiente. Intente sintonizar otro canal. / Ajuste la antena. / Compruebe todas las conexiones de cable. Calidad de sonido deficiente. Intente sintonizar otro canal. / Ajuste la antena.
Problema Posible Solución La imagen no está centrada en la pantalla. Ajuste la posición horizontal y vertical. La posición de la pantalla se debe ajustar respecto a la fuente de salida (por ejemplo, STB) con una señal digital. La imagen aparece distorsionada en la esquina de la pantalla. Si Ajuste a pantalla está seleccionado en algún dispositivo externo, la imagen puede aparecer distorsionada en la esquina de la pantalla. Este síntoma se origina en los dispositivos externos, no en el televisor.
¦ Especificaciones del equipo de montaje en la pared (VESA) Instale el montaje mural en una pared sólida, perpendicular al suelo. Para colocarlo en otros materiales de construcción, póngase en contacto con el distribuidor más cercano. Si se instala en el techo o en una pared inclinada, puede caerse y causar graves lesiones personales. N Las dimensiones estándar de los equipos de montaje mural se muestran en la tabla anterior.
¦ Seguridad en el espacio de instalación Mantenga la distancia requerida entre el producto y otros objetos (por ejemplo, paredes) para asegurar la ventilación adecuada. En caso contrario, se podría producir un incendio por un incremento de la temperatura interna del producto. Instale el producto a la distancia requerida como se muestra en la ilustración. N Cuando utilice un soporte o un montaje mural, use sólo las piezas proporcionadas por Samsung Electronics.
¦ Especificaciones Nombre del modelo LN22B350 Tamaño de pantalla (Diagonal) 22 pulg Resolución de PC (óptima) 1360 x 768 a 60Hz Sonido (Salida) Dimensiones (An x Pr x Al) Sin el soporte Con el soporte 3W x 2 21,9 X 3,5 X 15,3 pulgadas (557,5 x 88,8 x 387,7 mm) 21,9 X 8,0 X 16,7 pulgadas (557,5 x 202,5x 424,8 mm) Peso Sin el soporte Con el soporte Consideraciones medioambientales Temperatura de funcionamiento Humedad de funcionamiento Temperatura de almacenamiento Humedad de almacenamiento 8,4 lbs
Esta página se ha dejado intencionadamente en blanco. BN68-01975M_00L02.