Samsung Air Purifier User manual AX300T9080S, AX300T9080W ꞏꞏ Thank you for purchasing this Samsung air purifier. ꞏꞏ Before operating this unit, please read this user manual carefully and retain it for future reference. ACR AX9500R 미주향 사용설명서_EN_DB68-08449A-01NEW.
Contents Safety Information 4 Safety Information 4 Package Content 8 Accessories 8 At a Glance 9 Front side / Rear side 9 Buttons / Display 10 Connecting the power adapter / Disconnecting the power adapter 11 Removing the filters 12 Assembling the filters 14 Operation Features 17 Turning the power on/off / Controlling the fan speed 17 Wind-Free mode / Sleep mode / Lock 18 Clearing the filter replacement reminder 19 Checking the air quality 20 Using Combined Air Purifiers / Comb
The energy efficiency of this ENERGY STAR qualified model is measured based on a ratio between the model's CADR for Dust and the electrical energy it consumes, or CADR/Watt. Qualified model list : AX300T9080S / AX300T9080W FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Safety Information READ AND SAVE THESE INSTRUCTIONS California Proposition 65 Warning (US) Safety Information WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. These safety precautions are for owner’s safety and preventions of property damage. Therefore, please read this manual thoroughly before using your product. WARNING Hazards or unsafe practices that may result in severe personal injury or death.
Safety Information Keep a safe distance from surrounding objects. •• Clear space from each side: at least 24 inches and the rear: at least 10 inches •• The space is necessary to ensure efficient air intake and proper purification. •• Make sure that the inlet and outlet are not covered. Make sure that the power cord is not pressed under the product. •• Follow instructions to avoid electric shock or fire.
Safety Information Safety Information FOR USING WARNING If the product is exposed to water, immediately disconnect it from the power source and contact your local Samsung Service Center. •• Follow instructions to avoid electric shock or fire. If you notice a noise, burning smell or smoke from the product, immediately stop using it and contact your local Samsung Service Center. •• Follow instructions to avoid electric shock or fire.
Safety Information If any of the electric components inside the air purifier has contacted liquid or water, disconnect the product from the power source and contact your local Samsung Service Center. •• Follow instructions to avoid electric shock or fire. Do NOT attempt to repair or modify the product. •• Use only the standard rated fuse. •• Follow instructions to avoid electric shock, fire, malfunction or injury. CAUTION Keep your air purifier at least 7 feet away from a TV or other audio/visual media.
Package Content Package Content Accessories Package Content Pre-filter 1 EA Deodorization filter¹⁾ 1 EA User manual 1 EA Power adapter 1 EA Dust collecting filter¹⁾ 1 EA ¹⁾ The deodorization filter and Dust collecting filter are replacement filters. They cannot be used again by washing them with water. NOTE •• After replacing a replacement filter with a new one, dispose of the old one in a waste bag as general waste. •• Use only Samsung authorized filters.
At a Glance The product design and specifications are subject to change without prior notice for quality improvement.
At a Glance Buttons 01 02 03 04 05 07 08 09 10 11 06 At a Glance 01 Power indicator 07 Power button 02 Fan speed indicator 08 Fan speed button 03 Wind-free mode indicator 09 Wind-free mode / Sleep mode button 04 Lock mode indicator 10 Lock button 05 Filter replacement indicator 11 Air quality / Filter reset button 06 Wi-Fi function indicator Bixby is the name of a Samsung AI solution and allows you to control the product with voice.
Connecting the power adapter Before using the air purifier, connect the power adapter to the product. Check the vertical direction of the power adapter, and then connect it to the port on the bottom rear of the product. • Slide the power adapter all the way in until it clicks into place. NOTE • The product will not work if you do not slide the power adapter all the way in. At a Glance Caution • Make sure that no damage is caused to the adapter. • Do not use a damaged adapter.
At a Glance Removing the filters When using a replacement filter for the first time or replacing it with a new one, be sure to remove the vinyl packaging. STEP 1 Open the rear panel. • Put your fingers in both grooves at the top of the rear panel, and then pull it forward. At a Glance STEP 2 Remove the pre-filter. STEP 3 Remove and discard the protective foam. STEP 4 Remove the deodorization filter. 12 English ACR AX9500R 미주향 사용설명서_EN_DB68-08449A-01NEW.
STEP 5 Remove the dust collecting filter. Deodorization filter STEP 6 Remove the vinyl packaging from the deodorization filter and the dust collecting filter. • And also, remove the black cloth inside the vinyl packaging of the deodorization filter. At a Glance Dust collecting filter English 13 ACR AX9500R 미주향 사용설명서_EN_DB68-08449A-01NEW.
At a Glance Assembling the filters STEP 1 Insert the dust collecting filter. • Let the filters sit inside the grooves at the bottom. • Check direction of the filters before inserting. At a Glance STEP 2 Insert the deodorization filter. STEP 3 Insert the pre-filter. • Insert the hooks on the filter into the grooves on the bottom of the product, then slightly push against the unit. 14 English ACR AX9500R 미주향 사용설명서_EN_DB68-08449A-01NEW.
STEP 5 Close the rear panel. • Insert the hook on the panel first into the groove at the bottom of the unit, then slightly push until it clicks. STEP 6 After replacing the filters, reset the filter alarm. ] button for 3 seconds NOTE • When the filters need to be replaced, filter alarm lights up in red with beeping sound. At a Glance • Press and hold the [ or more. In case of filter replacement, replace the filters with new ones, then reset the filter replacement reminder.
At a Glance Using the filters •• If you operate the product without the filters, the purification effect is lowered, and the air flow sound may be abnormally loud during operation. •• You may notice a subtle odor from fresh filters when using your newly purchased air purifier for the first time. –– which will disappear naturally in about a day. •• The filter cleaning and replacement cycles may vary depending on the operating environment.
Operation Features If you hear a chime sound when you connect the power cord, it means that the power is normally connected. Turning the power on/off • Press the Power button. The air purifier turns on with a notification sound and automatically begins operation. –– Sensor preparation begins upon startup with a display indication and continues for 12 seconds. The air quality is then indicated by color and the concentration level. –– Cleanliness color indicator: PM10, PM2.5, PM1.
Operation Features Wind-Free mode Use the Wind-Free mode to purify the air with a gentle wind. When you start the Wind-Free mode, the front panel comes back into the product’s body. • If you cancel the Wind-Free mode while it is running, the product operates in the previous mode. Cancel • Press the [ ] or [ ] button. Sleep mode Sleep mode provides a clean, quiet and comfortable room for a good night's sleep. • Press and hold the [ ] button for 3 seconds or more to operate the product in the Sleep mode.
Clearing the filter replacement reminder Use the Filter Reset function to reset the filter replacement reminder after replacing the deodorization filter or the dust collecting filters. The product automatically tells you when to replace them. • If you hear a beep and the filter replacement indicator lights up in red while the product is running, replace the replacement filters with new ones. Then press and hold ] button for 3 seconds or more to reset the filter the [ replacement reminder.
Operation Features Example of PM10 cleanliness indications PM 10 8 Example of Gas cleanliness indication GAS Checking the air quality Use the Air quality function to display the cleanliness color indication for PM10, PM2.5, PM1.0, or GAS and the concentration for PM10, PM2.5, or PM1.0 on the display. • By default, both the cleanliness color indicator and the concentration display for PM10, PM2.5, and PM1.0 display the PM10 cleanliness status.
NOTE Operation Features Alert • When the air quality level remains the same for a specific period of time during operation, All indicators and displays except for the cleanliness color indicators turn off and the product enters the Energy saving mode. (This does not apply when using the product in Sleep mode.
Using Combined Air Purifiers • When combined, the top product will operate both units together. The bottom unit can only be turned on or off, but operational control is ceded to the top unit. –– In combined air purifiers, you can operate them using only the top product. The bottom product operates in the same way as the top product. However, when the top product is operating, you can turn just the bottom product on or off.
Decombining air purifiers STEP 1 Remove the top product. • Hold the bottom handles of the top product and remove it. Handle Caution • Be sure to check whether the bottom product is installed stably. • When moving the top product, hold its handles and be careful not to drop it. STEP 2 Connecting the power to the decombined product. • Connect the power adapter to the decombined top product. • Rotate the module connector on the top of the bottom product.
Using Combined Air Purifiers Precautions when using combined air purifiers Caution You can combine only two products. Beep Beep Beep • If three or more products are combined, they do not operate and a "beep beep beep" sound is emitted continuously. The products may fall down and cause product damage or personal injury. NOTE Operation Features 2 Only • If three or more products are combined, the alert "2 Only" is shown on the display. Do not stack products in two stages and apply the power to each one.
Caution Do not place liquids on the products when each product is used alone or when combined products are used. • Liquids that enter the product may cause product malfunction and filter contamination. Do not combine products or use combined products on a floor that is inclined or not flat. • Even a small impact may cause the product to fall. Operation Features Do not combine products or use combined products on a table.
Cleaning and Maintenance Be sure to disconnect the power plug from the socket before cleaning the product. Cleaning the air purifier exterior •• Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it. •• Wipe the grooves on the front and rear panels with a cotton swab. •• If it is too hard to clean the dust from the front or rear panel, remove the panel and wash it with water. Caution •• Do not wipe the product with an alkaline detergent.
Cleaning and drying the filters NOTE •• For how to remove or assemble the filters, see pages12 and14. Cleaning the pre-filter • If you can see dust accumulations, remove large dust first with a vacuum cleaner, and then rinse the filter with lukewarm water. –– Cleaning interval: 2 weeks (when using the product 24 hours every day) Caution • When cleaning the pre-filter, rubbing with a brush or a similar tool may damage the superfine fibres.
SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE, 5G or more wireless networks.
2 Registering your Samsung account •• Select manually: Air purifier > Samsung •• A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. •• Scan: [Air purifier] Samsung NOTE •• If you already have a Samsung account, log in to the account.
SmartThings app NOTE •• For the security protocols for wireless/wired access points, WPA-PSK and WPA2-PSK are recommended. For the authentication methods, AES is recommended. New Wi-Fi authentication specifications and Wi-Fi nonstandard authentication methods are not supported. •• The product supports the IEEE802.11 b/g/n (2.4 GHz) communication protocol. (Samsung recommends IEEE802.11n.
Controlling your air purifier with SmartThings app Smartly control your air purifier using the SmartThings app. Category Function Monitoring Indoor air quality Power supply Description Check the indoor air cleanliness. • Touch the icon to view the PM10 / PM2.5 / PM1.0 levels and gas cleanliness. Turn your air purifier on or off. Controlling the Select the fan speed you want. fan speed Set the timed on/off times. • You can set a total of up to 10 timed on/off times.
Before Requesting Service Check the following before requesting service from the Service Center. Operation The air purifier does not operate. Ding 띡- • Check the power supply and turn on the air purifier again. • Make sure that the power plug is plugged in, and then turn on the air purifier again. If it still does not operate, try a different power outlet. • Make sure that the rear panel is closed properly. If you hear a "Ding" sound when you open and then close the rear panel, it is closed properly.
Odors The air purifier smells strange. • Because the air purifier sucks and circulates indoor air, if you use it in a closed space for a long time, odors generated in your home can saturate the filters. –– Remove the pre-filter, deodorization filter, and dust collecting filter, and then smell them nearby to check whether odors are saturated to them. If saturated, wash or replace them. You will be charged for replacing filters regardless of the remaining warranty.
Before Requesting Service Pollution level The fan speed does not change when the pollution level changes. • Set the fan speed to Auto. The fan speed does not change automatically when it is set to Low , Medium, or High or when the Wind-Free or Sleep mode is running. The PM10, PM2.5, PM1.0 levels do not change from Good (05). • This may happen when the room is properly sealed and the air is clean.
Memo English 35 ACR AX9500R 미주향 사용설명서_EN_DB68-08449A-01NEW.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A - Consumer Electronics - Mobile Phones 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) ACR AX9500R 미주향 사용설명서_EN_DB68-08449A-01NEW.