User Manual

English-22
Using the Fast function
Using the Comfort function
You can set the Comfort function to provide mild cooling.
When the air conditioner is operating in Cool mode;
Remote controller display
1. Press the Options button.
2. Press the
button until (Comfort) indicator starts to blink.
3. Press the SET button to set the Comfort function.
- (Comfort) will blink first, then remain on the display as (Comfort) and Comfort
function will begin.
Cancel
 Press the Options button again to make the (Comfort) indicator blink
and press the SET button.
• Comfort function is only available in Cool mode.
• Vertical air swing can be adjusted.
• Set temperature can be adjusted, but fan speed cannot be adjusted.
• If the Comfort function is selected while Single user/
function is on, corresponding function will be cancelled.
You can set the Fast function to provide fast and powerful cooling.
When the air conditioner is operating in Cool mode;
Remote controller display
1. Press the Options button.
2. Press the
button until (Fast) indicator starts to blink.
3. Press the SET button to set the Fast function.
- (Fast) will blink first, then remain on the display as (Fast) and Fast function will
begin.
Cancel
 Press the Options button again to make the (Fast) indicator blink and
press the SET button.
• Fast function is only available in Cool mode.
• Vertical air swing can be adjusted.
• Set temperature and fan speed cannot be adjusted.
• If the Fast function is selected while Single user/
function
is on, corresponding function will be cancelled
MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-04540A.indd 22 9/1/2014 5:10:43 PM