User Manual

English-20
mode
For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep  Sound sleep  Wake up stage.
When the air conditioner is operating in Cool/Heat
(ARJQ) mode;
Remote controller display
1. Press the Timer button.
2. Press the
button until ( ) indicator starts to blink.
3. Press the SET button to set the
mode.
- (
) indicator will keep blinking and you can set the time.
4. Press the
button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~12 hours.
- Time can be set from minimum 30 minutes to maximum 12 hours.
- Default time setting for the
mode is 8 hours.
5. Press the SET button to complete the
mode setting.
- (
) indicator and the set time of the mode will be displayed on
the remote controller display.
- Timer indicator (
) will be displayed on the indoor unit display.
- mode setting will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the ( ) indicator on the
remote controller display and the Timer indicator ( ) on the indoor unit display.
Cancel
 Press the button to make the set time to display as ,
and press the SET button.
Additional options available in mode
You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
Fan speed will be adjusted automatically according to the mode.
However, If you select
mode while heating operation is on, you can adjust fan speed.
When the mode is on.
InCoolmode:Airowdirectionwillbeadjustedautomatically.
In Heat
(ARJQ) mode:Adjustingairowdirectionisavailable.
Temperature and fan speed change in mode
• Fall asleep: Eases you into sleep by dropping the temperature.
• Sound sleep: Relaxes your body and raises your temperature slightly.
• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
• Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.
• If the set temperature is too low, you may feel cold during sleep or catch a cold.
• Optimal operation hour of
mode is 8 hours. Therefore, if the time is set too short or long, you
may not feel as comfortable as you would expect.
• If the
mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the
operation time and the air conditioner will stop automatically.
• When the On timer and the
function is set simultaneously, the air conditioner will only apply
the function that was set later.
MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-04540A.indd 20 9/1/2014 5:10:32 PM