User Manual
English-19
TIMER
03
Setting the Off timer
When the air conditioner is on;
Remote controller display
1. Press the Timer button.
2. Press the
button until (Off) indicator starts to blink.
3. Press the SET button to set the Off timer.
- (Off ) indicator will keep blinking and you can set the time.
4. Press the
button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~24 hours.
- Time can be set from minimum 30 minutes to maximum 24 hours.
5. Press the SET button to complete the Off timer setting.
- (Off ) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator (
)
will be displayed on the indoor
unit display.
- Off timer setting will be cancelled if you don't press the SET button within
10seconds after setting the time. Therefore, check for the (Off) indicator on the
remote controller display and the Timer indicator (
)
on the indoor unit display.
Cancel
Press the button to make the set time to display as ,
and press the SET button.
Press the Power (
) button.
• O
timer may not work depending on the On/O status of the indoor
unit and the On/O status of the indicator on the remote controller
display.
• Only the latest setting timer will be applied between the On Timer/O
Timer and
O timer functions.
• After setting the timer, the set time will be displayed for 3 seconds
before it disappears.
• If Timer function is used in Heating mode, Air conditioner work into
former mode. (AR
✴✴JR✴✴ series)
Combining On Timer and Off Timer
When the air conditioner is off When the air conditioner is on
When set time on On timer is shorter than O timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will turn on after 3 hours from the
moment you have set the timer and the air conditioner will
remain on for 2 hours and then turn off automatically.
When set time on On timer is longer than O timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will turn off after 1 hour from the
moment you have set the timer and turn on after 2 hours
from the moment it was turned off.
• Set time for the On timer and the Off timer should be different from each other.
• When the On timer and the Off timer is set, setting can be cancelled by pressing the Power
button.
Setting the On/Off timer
MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-04540A.indd 19 9/1/2014 5:10:28 PM