User Manual

English-14
Remote controller display
• Thesignalmaynotbereceivedproperlyifelectronicuorescentlampssuchasinverteruorescentlampsare
operating in the same space.
• Ifotherelectricalproductsoperatebytheremotecontroller,callyournearestcontactcenter.
Checking the remote controller
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through
your local, free battery return system.
Correct disposal of batteries in this product
Operation mode
indicator
Set temperature/ Time (for
Timer option) indicator
good'sleep indicator
Options indicator
Transmit indicator
Low battery indicator
Fan speed indicator
Vertical air swing indicator
Settings indicator
Low Battery warning
When the battery is exhausted,( ) will be displayed in the
remote controller display. When the icon appears, change
the batteries. The remote controller requires two 1.5 V AAA
type batteries.
Storing the remote controller
When you do not use the remote controller for long time,
remove the batteries from the remote controller and store it.
Inserting the batteries
1. Push the lever as arrow indicates on the rear side of the
remote controller and pull up.
2. Insert two AAA batteries.
Check and match the “+” and “-” signs accordingly. Make sure
you have inserted the batteries in correct position.
3. Close the cover by place it back to its original position.
You should hear click sound when the cover is locked properly.
•Makesurethatthewaterdoesnotgettotheremotecontroller.
•VirusDoctorfunctionisdisplayedontheremotecontrollerdisplaybutnotsupportedinthismodel.
 Heat mode can be selected ARJQ Series.
As to ARJR Series, don’t operate the air conditioner when the remote controller is set to
Heat mode.
MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-04540A.indd 14 9/1/2014 5:10:12 PM