Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Country CANADA U.S.A Customer Care Center 1-800-SAMSUNG(726-7864) 1-800-SAMSUNG(726-7864) Web Site www.samsung.com/ca www.samsung.com Address Samsung Electronics Canada Inc.
Important Warranty Information Regarding Television Format Viewing Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
English Contents General Information ■ ■ ■ ■ ■ ■ PC Display List of Features.............................................................................. 2 Accessories . ................................................................................ 2 Viewing the Control Panel ............................................................ 3 Viewing the Connection Panel ..................................................... 4 Remote Control...................................................................
General Information List of Features Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed. HDMI/DVI connection of your PC to this TV. Excellent Picture Quality SRS TruSurround XT - SRS TruSurround XT provides a virtual surround system.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Side Panel buttons 1 2 3 4 5 6 8 8 7 The product color and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, AV, S-Video, Component, PC, HDMI).
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6~12. The product color and shape may vary depending on the model. 1 AUDIO OUT Connects to the audio input jacks on your Amplifier/ Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN [PC] / [AUDIO] Connects to the video and audio output jacks on your PC.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “ ” and “3”. 5 (MUTE) Press to temporarily cut off the sound. @ MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV. ANT IN Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. ANT IN This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. C onnect an HDMI Cable between the HDMI/DVI IN jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. C onnect a Component Cable TV Rear Panel between the COMPONENT DVD Player or Cable Box / IN [Y, PB, PR] jacks on the TV Satellite receiver (Set-Top Box) and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). 2.
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. ANT IN 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 4.
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. 1. C onnect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control.
Connecting a PC Using the D-Sub Cable 1. C onnect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. 2. C onnect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. TV Rear Panel PC 2 PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 1. C onnect a HDMI/DVI cable between the HDMI/DVI IN jack on the TV and the PC output jack on your computer. 2.
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Plug & Play Feature Plug & Play When the TV is initially powered on, basic settings proceed automatically and subsequently. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while “Plug & Play” is running. The Screen Saver is activated if there is no operating signal for longer than 15 minutes. 1.
Auto PlugProgram & Play Auto Program is completed. 75 Channels are memorized. DTV Air : 24 Air : 1 DTV Cable : 17 Cable : 33 OK 6. Press the ENTER button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER The message “Set to daylight saving time.” is displayed. Enter button. Set the Clock Mode. Clock Mode If you select “Manual”, “Enter the current date and time.” is displayed. (See page 37) : Auto Manual Move 7.
Using the The Button button is used to select stations that broadcast a digital signal. 1. F or example, for Channel 7-1, press 7, then , then 1. H D indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. F or quick channel change, press the number buttons, then press the ENTER button. Using the PRE CH Button to select the Previous Channel 1. Press the PRE CH button. The TV will switch to the last channel viewed.
Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing. 1. P ress the TOOLS button. The “Tools” menu will appear. Tools 2. Press the ▲ or ▼ button to select a menu. Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air 3. P ress the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.
Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select "Auto Program", then press the ENTER TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. Move 3. P ress the ▲ or ▼ button to select the antenna connection, then press the ENTER button.
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1. Press the MENU button to display the menu. Press the▲ or ▼ button to select “Input”, then press the ENTER Input Source List : TV ► Edit Name ► button. 2. Press the ENTER button to select "Source List".
Picture Control Changing the Picture Standard You can activate either Dynamic, Standard, Movie by making a selection from the menu. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. TV Picture Mode Backlight Contrast Brightness Sharpness Color Tint G 50 ▼ More : Standard Move button to select "Mode". 2. Press the ENTER Press the ▲ or ▼ button to select the “Dynamic”, “Standard” or “Movie”.
Configuring Picture Options Activating Picture Options 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2. Press the ▲ or ▼ button to select "Picture Options", then press the ENTER button. TV Picture ▲ More Picture Options Reset : OK ress the ▲ or ▼ button to select a particular item. Press the ENTER P button. When you are satisfied with your setting, press the ENTER button.
➣ Temporary image retention may occur when viewing a static image on the set for more than two hours. TV Size Wide 16 : 9 Zoom1 Zoom2 Wide Fit 4:3 Just Scan ➣ After selecting “Zoom1”, “Zoom2” or “Wide Fit”: Press the ◄ or ► button to select “Position”, then press the ENTER button. Press the ▲ or ▼ button to move the picture up and down. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.
Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. TV 1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 20) 2. Press the ▲ or ▼ button to select "Digital NR", then press the ENTER Picture Options Color Tone : Normal Size : Wide Digital NR : Auto HDMI Black Level : Normal Film Mode : Off button. 3.
Resetting the Picture Settings to the Factory Defaults 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. TV 2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button. Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENTER button. Picture ▲ More Picture Options Reset : OK OK Cancel Press the EXIT button to exit. Each mode can be reset. Move Enter Return English - 23 BN68-01395D-Eng.
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Press the ENTER button to select "Mode". Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting, then press the ENTER button.
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. TV Sound Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
Choosing a Multi-Channel Sound (MTS) track - Analog Multi-Track Sound TV 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER Multi-Track Options Preferred Language Multi-Track Sound button. : English : Stereo ► ► 2. Press the ▲ or ▼ button to select "Multi-Track Options", then press the ENTER button. Enter 3. P ress the ▲ or ▼ button to select “Multi-Track Sound”, then press the ENTER button.
Setting the TV Speakers On/Off Sound output from the TV speakers is muted. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER TV button. 2. Press the ▲ or ▼ button to select "TV Speaker", then press the ENTER Sound Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off TV Speaker : On button. Move TV 3. Press the ▲ or ▼ button to select “Off”, then press the ENTER button.
Channel Control Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. TV 2. Press the ▲ or ▼ button to select "Clear Scrambled Channel", then press the ENTER button. It searches scrambled channels, which are to be removed from the list.
Adding and Erasing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, first run “Auto Program” (see page 17). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER TV Channel button. Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength 2.
To Set-Up Your Favorite Channels You can set channels you watch frequently as favorites. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. TV Channel Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength 2. P ress the ▲ or ▼ button to select "Channel List", then press the ENTER button. Move 3. Press the ▲ or ▼ button to select "All" or "Added", then press the ENTER button.
Viewing the Channel Lists You can display a list of all channels, added channels or your favorite channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER TV Channel Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. 2. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button. Move TV 3.
Labeling Channels Channels can be labeled ��������������������������������������������������������������������������� s������������������������������������������������������������������ o that their call letters appear whenever the channel is selected. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Name”, then press the ENTER button.
Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER 2. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. Move 3. Press the ◄ or ► button to adjust the fine tuning.
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.
Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode. Preset: Press the SOURCE button to select PC mode. 1. P ress the MENU button to display the menu.
Changing the Screen Position Adjust the PC’s screen positioning if it does not fit the TV screen. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Picture", then press the ENTER Press the ▲ or ▼ button to select "Screen", then press the ENTER 2. Press the ▲ or ▼ button to select "Position", then press the ENTER PC Screen Image Lock ► Position ► Image Reset Resolution : 1680 X 1050 @60Hz button. button.
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER Press the ▲ or ▼ button to select "Time", then press the ENTER button. button.
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER Press the ▲ or ▼ button to select "Time", then press the ENTER TV button. button. Setup Plug & Play Language : English ► ► Time ► V-Chip ► Caption Melody : Medium ► ► Energy Saving : Off SW Upgrade ► ► Move 2.
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER Press the ▲ or ▼ button to select "Time", then press the ENTER button. button. 2. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER 3.
Setting the On/Off Timer 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER Press the ▲ or ▼ button to select "Time", then press the ENTER button. button. TV Time 1/ 1/2008 12 : 00 am 2. Three different On/Off Timer Settings can be made. Press the ▲ or ▼ button to select “Timer 1”, “Timer 2” or “Timer 3”, then press the ENTER button.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. “V-Chip” function is not available in HDMI, component or PC mode. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while setting up the “V-Chip”. U.S.A Only This product is covered by the following U.S.
How to Enable/Disable the V-Chip 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. button. TV button.
3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “TV Parental Guidelines”, then press the ENTER button. TV V-Chip V-Chip Lock • • • • • • MPAA Rating ► Canadian English Canadian French ► ► Downloadable U.S. Rating Change PIN ► ► TV TV ALL FV V S Move 5. At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on your existing setup, the “ ” symbol will be selected.
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER 2.
How to Set up Restrictions Using the ‘Canadian English’ 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. button. TV button.
How to Set up Restrictions Using the ‘Canadian French’ 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. button. TV button.
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER 2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. TV button. button.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button to select “Caption”.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button to select “Caption”. 3. Press the ENTER Press the ▲ or ▼ button to select “On”, then press the ENTER TV button.
Adjusting the TV On/Off Melody Sound A melody sound can be set to come on when the TV is powered On or Off. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Melody", then press the ENTER TV button. Setup Plug & Play ► Language : English ► Time ► V-Chip Caption ► ► Melody Energy Saving ► ► : Medium : Off SW Upgrade ► Move Enter Return 3.
Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV. 1. Insert a USB drive containing the firmware upgrade into the SERVICE port on the rear of the TV. TV Rear Panel USB Drive 2. Press the MENU button to display the menu.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in.
Problem Possible Solution Horizontal bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Vertical bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Screen is black and power indicator light blinks steadily. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard.
How to Adjust the Stand (LN19A450C1D, LN19A451C1D) Button (1) 1. P lace the front of the TV onto a soft cloth or cushion on a table as in Figure (1). - Align the TV bottom along the table edge. 2. P ress on the center of the TV back. Adjust the stand as in Figure (2) while pressing the button on the back of the stand. 3. P lace the TV on the table so that the TV sits safely on the table.
Installing the Stand 2 1 1. Connect your LCD TV and the stand. ➣ Two or more people should carry the TV. ➣ Make sure to distinguish between the front and back of the stand when assembling them. ➣ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV. 2. Fasten two screws at position 1 and then fasten two screw at position 2. ➣ Stand the product up and fasten the screws.
Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family LCD-TV PDP-TV inches VESA Spec.
Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. Cable Figure 2 Figure 1 The location of the Kensington Lock may be different depending on its model. 1.
Specifications Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With Stand Without stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LN19A450C1D, LN19A451C1D LN22A450C1D, LN22A451C1D 19 inches 22 inches 1440 x 900 @ 60 Hz 1680 x 1050 @ 60 Hz 3W x 2 3W x 2 18.8 X 2.3 X 13.7 inches (477.1 X 57.5 X 348.6 mm) 18.8 X 7.1 X 15.2 inches (477.1 X 180.
TÉLÉVISEUR ACL Guide de l’utilisateur Imaginez les possibilités Merci d’avoir acheté un produit Samsung. Pour obtenir un service complet, veuillez enregistrer votre produit à : www.samsung.com/global/register Modèle BN68-01395D-Fre.
Remarques importantes sur la garantie relative au format de l'image du téléviseur Le format écran large des écrans ACL (16:9, soit le rapport hauteur/largeur de l’image) est conçu principalement pour les vidéos plein écran à écran large. Les images affichées devraient être en format écran large 16:9 ou agrandi afin de remplir l’écran si votre modèle offre cette caractéristique et que les images sont constamment en mouvement.
Table des matières Informations générales ■ ■ ■ ■ ■ ■ Liste des fonctions........................................................................... 2 Accessoires...................................................................................... 2 Présentation du panneau de commande ........................................ 3 Présentation du panneau de branchement...................................... 4 Télécommande................................................................................
Informations générales Liste des fonctions Paramètres d'image modifiables pouvant être stockés dans la mémoire du téléviseur. Minuterie automatique pour allumer ou éteindre le téléviseur. Minuterie de mise en veille spéciale. Interface numérique et de réseau exceptionnelle : Avec un syntoniseur numérique HD intégré, la vision des émissions HD sans inscription ne nécessite pas de décodeur câble/récepteur satellite (boîtier décodeur). Connexion HDMI/DVI entre votre PC et ce téléviseur.
Présentation du panneau de commande Boutons situés en bas à droite du panneau Les boutons situés en bas à droite du panneau commandent les fonctions de base de votre téléviseur, notamment le menu à l'écran. Pour utiliser les fonctions plus avancées, vous devez utiliser la télécom-mande. Touches du panneau latéral 1 2 3 4 5 6 8 8 7 La couleur et la forme du produit peuvent varier en fonction du modèle.
Présentation du panneau de branchement Utiliser les prises du panneau de connexion pour brancher des composants audiovisuels utilisés continuellement, par exemple un lecteur DVD ou un magnétoscope. Pour plus d’informations sur le branchement des appareils, voir pages 6~12. La couleur et la forme du produit peuvent varier en fonction du modèle. 1 AUDIO OUT A connecter aux prises d'entrée audio de votre amplificateur/home cinéma. 2 DIGITAL AUDIO OUT (OPTICAL) À brancher à un appareil audio numérique.
Télécommande Vous pouvez utiliser la télécommande à une distance maximale du téléviseur d’environ 7 m. 1 POWER Pour allumer et éteindre la télévision. 2 TV Pour sélectionner directement le mode TV. 3 Boutons numériques Permet de changer de chaîne. 4 Appuyez sur ce bouton pour sélectionner des canaux supplémentaires (numériques et analogiques) diffusées par la même station. Par exemple, pour sélectionner le canal “54-3”, appuyez sur “54”, puis sur “ ” et sur “3”.
Insertion des piles dans la télécommande 1. Soulevez le panneau à l’arrière de la télécommande, comme illustré. 2. Placez deux piles AAA. Assurez-vous de faire correspon dre les pôles “+” et “-” des iles avec le schéma situé à l’intérieur du compartiment. 3. Replacez le couvercle. Retirez les piles et stockez-les dans un endroit frais et sec si vou n’utilisez pas la télécommande pendant longtemps. La télécommande peut être util isée jusqu’à environ 7 mètres de la télévision.
Connexion du câble TV Pour brancher un système de télévision par câble, suivez les instructions ci-dessous. Câble sans boîte de jonction 1. Branchez le câble d’arrivée dans la prise ANT IN située à l’arrière de la télévision. ANT IN ette télévision étant équipée d’un dispositif pour le câble, vous n’avez pas besoin de boîte de jonction pour C voir des canal câblées en clair. Branchement d’une boîte de jonction servant à décrypter l’ensemble des canal 1.
Connexion d’un lecteur DVD ou d’un décodeur câble/récepteur satellite (boîtier décodeur) via HDMI Ceci n’est réalisable que si le périphérique externe dispose d’un connecteur de sortie HDMI. 1. Branchez un câble HDMI Lecteur DVD ou décodeur câble/ Pannear arrière de la télévision entre la prise HDMI/DVI IN du récepteur satellite (boîtier décodeur) téléviseur et la prise HDMI du lecteur DVD ou du décodeur câble/récepteur satellite (boîtier décodeur).
Branchement d’un lecteur DVD, câblosélecteur ou récepteur satellite à l’aide de câbles composantes Les prises du panneau arrière de votre téléviseur ont été spécialement conçues pour faciliter le branchement d’un lecteur DVD ou d’un décodeur câble/récepteur satellite (boîtier décodeur) à votre téléviseur. 1. Branchez un câble composant entre les prises COMPONENT IN [Y, PB, PR] du téléviseur et les prises COMPONENT [Y, PB, PR] du lecteur DVD ou du décodeur câble/récepteur satellite (boîtier décodeur). 2.
Branchement d’un magnétoscope Connexion vidéo Ces instructions supposent que vous avez déjà branché votre télévision à une antenne ou un système de télévision par câble (en suivant les instructions pages 6-7). Sautez l’étape 1 si vous n’avez pas encore branché d’antenne ou de système de télévision par câble. 1. D ébranchez l’antenne ou le câble de l’arrière de la télévision. ANT IN 2. B ranchez le câble ou l’antenne à la prise ANT IN située à l’arrière du magnétoscope. 3.
Branchement d'un système audio numérique Les prises du panneau arrière du téléviseur permettent de brancher facilement une chaîne audio numérique (cinéma maison/ récepteur) à votre téléviseur. 1. ranchez un câble optique B entre les prises DIGITAL AUDIO OUT (OPTICAL) (Sortie audio numérique/ Optique) du téléviseur et les prises d'entrée numérique du système audio numérique.
Branchement d’un PC Utilisation d’un câble secondaire D 1. 2. ranchez un câble secondaire B D entre le connecteur PC IN [PC] du téléviseur et le connecteur de sortie PC de votre ordinateur ranchez un câble audio PC B entre la prise PC IN [AUDIO] du téléviseur et la prise Sortie audio de la carte son de votre ordinateur. Pannear arrière de la télévision PC 2 Câble Audio PC (non fourni) 1 Câble D-Sub (non fourni) Utilisation d’un câble HDMI/DVI 1.
Fonctionnement Mise en marche et arrêt de la télévision Appuyez sur le bouton POWER de la télécommande. Il est aussi possible d’utiliser la touche POWER du téléviseur.
Prog.&auto Plug Play Progr. Aut. terminée 75 Channels are memorized. DTV Air : 24 Air : 1 DTV Câble : 17 Câble : 33 OK Intro. 6. Appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Auto”, puis appuyez sur le bouton ENTER . Le message “Régler à l’heure avancée.” s’affiche. Si “Manual” est sélectionné, “Entrez la date et lheure en cours.” s’affiche. Passer Prêt à l’emploi Régler le mode horloge Mode horloge : Auto Manuel (Voir page 37) 7.
Utilisation du bouton Utilisez le bouton pour sélectionner les chaînes diffusant un signal numérique. 1. Par exemple, pour choisir le canal 7-1, appuyer sur 7, puis sur – et sur 1. D indique que le téléviseur reçoit un signal DHD (Digital High Definition). H SD indique que le téléviseur reçoit un signal analogique standard (Standard Definition). our changer rapidement de chaîne, appuyez sur le pavé numérique, puis sur le P bouton ENTER .
Utilisation de la touche TOOLS La touche TOOLS peut servir à sélectionner rapidement et aisément les fonctions utilisées fréquemment. Le menu “Outils” change selon le mode d’entrée externe choisi. 1. Appuyer sur la touche TOOLS. Le menu “Outils” s’affiche. 2. Appuyer sur la touche ▲ ou ▼ pour sélectionner un menu. Outils 3. Appuyer sur la touche ▲/▼/◄/►, puis sur ENTER pour afficher, modifier ou utiliser les éléments sélectionnés.
Enregistrement des canal dans la mémoire (méthode automatique) 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . 2. TV Chaîne Antenna : Air Prog. auto Effacer les canaux brouillés Liste des canaux Nom Syn. Précise Puissance signal ppuyez sur les bouton ▲ ou ▼ pour sélectionner “Prog. auto”, puis appuyez sur le A bouton ENTER . Dépl. 3.
Pour sélectionner la source Permet de sélectionner le téléviseur ou d’autres sources d’entrée externes comme les lecteurs DVD ou les décodeurs câble/récepteurs satellite (boîtiers décodeurs) connectés au téléviseur. Permet de sélectionner la source d’entrée de votre choix. TV Entrée Liste source : TV ► Entrer le nom ► 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Entrée”, puis appuyez sur le bouton ENTER . 2.
Contrôle de L’image Changement du format normal de l’image Vous pouvez activer l’un ou l’autre de ces modes en le sélectionnant dans le menu. TV Image 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ENTER pour sélectionner “Image”. 2. Mode Contre-jour Contraste Luminosité Netteté Couleur Teinte V 50 ▼ Plus ppuyez sur le bouton ENTER A pour sélectionner “Mode”. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Dynamique”, “Standard” ou “Film”. Dépl.
Configuration des options d’image Activation des options d’image 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les boutons ENTER pour sélectionner “Image”. TV Image ▲ Plus Options d’image Régler : OK 2. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Options d’image”, puis appuyez sur le bouton ENTER . ppuyer sur la touche ▲ ou ▼ pour choisir un élément particulier. Appuyer sur la A touche ENTER . Une fois le réglage effectué correctement, appuyer sur ENTER .
➣ Une rémanence d'image temporaire peut se produire si une image fixe est affichée sur l'écran pendant plus de deux heures. ➣ Après avoir sélectionné “Zoom1”, “Zoom2” ou “Format large” : Appuyer sur la touche ◄ ou ► pour sélectionner “Position”, puis sur ENTER Appuyer sur la touche ▲ ou ▼ pour déplacer l’image vers le bas et le haut. Régler: Appuyer sur la touche ◄ ou ► pour sélectionner “Régler”, puis sur ENTER . Il est possible d’initialiser le réglage.
Réglage de la réduction numérique des bruits Cette fonction règle la luminosité du téléviseur afin de réduire la consommation d'énergie. Lorsque vous regardez la télévision la nuit, définissez l'option “Réduct. bruit num.” sur “Haute” pour réduire la fatigue des yeux et la consommation d'énergie. TV 1. Suivre les instructions 1 et 2 de ‘Activation des options d’image’. (Consulter la page 20) 2. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Réduct. bruit num.”, puis appuyez sur le bouton ENTER .
Rétablir les paramètres de réglage de l'image d'usine 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ENTER pour sélectionner “Image”. 2. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Régler”, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Effacer”, “OK”. Appuyez sur le bouton ENTER . Appuyez sur le bouton EXIT pour quitter. TV Image ▲ Plus Options d’image Régler : OK OK Effacer Dépl. Tous les modes peuvent être réinitialisés.
Contrôle du Son Changement du format normal du son Il est possible de choisir le mode sonore qui convient le mieux à l’émission écoutée. TV 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Son”, puis appuyez sur le bouton ENTER . 2. Appuyez sur les boutons ENTER pour sélectionner “Mode”. Appuyez sur les bouton ▲ ou ▼ pour sélectionner le réglage du son "Standard”, “Musique”, “Cinéma”, “Parole” ou “Personn.", puis appuyez sur ENTER . Dépl.
Paramétrage de la technologie TruSurround XT TruSurround XT est une technologie SRS brevetée qui résout le problème de la lecture de contenu multicanaux en 5.1, lorsque le système ne comprend que deux enceintes. La technologie Trusurround offre une qualité audio virtuelle exceptionnelle avec n'importe quel système à deux enceintes, y compris les haut-parleurs internes d'un téléviseur. Elle est entièrement compatible avec tous les formats multicanaux. 1. Appuyez sur le bouton MENU pour afficher le menu.
Sélection d'une bande son à canaux multiples (MTS) - Analogique Mode audio multipistes 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Son”, puis appuyez sur le bouton ENTER . TV Options multi-pistes Langue privilégiée Son multi-piste : English : Stéréo ► ► 2. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Options multi-pistes”, puis appuyez sur le bouton ENTER . 3.
Activation et désactivation des haut-parleurs La sortie audio des haut-parleurs du téléviseur est désactivée. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Son”, puis appuyez sur le bouton ENTER . TV Son Mode : Personnel Égaliseur SRS TruSurround XT : Off Options multi-pistes Volume auto : Off Haut-parleur TV : On 2. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Haut-parleur TV”, puis appuyez sur le bouton ENTER . Dépl. 3.
Contrôle des Chaînes Suppression des canaux brouillés – canaux numériques La fonction Suppression des canaux brouillés sert à éliminer les canaux brouillés une fois que la programmation automatique est terminée. Cette procédure peut prendre de 20 à 30 minutes. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . 2.
Ajout et suppression de chaînes Ce menu permet d’ajouter et de supprimer ou de définir les canaux favoris et d’utiliser le télé-horaire pour les diffusions numériques. Pour utiliser la fonction “Liste des canaux”, exécuter d’abord la fonction “Auto Program” (Voir page 17). 1. 2. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . TV Chaîne Antenna : Câble Prog.
Configuration de vos chaînes favorites Vous pouvez définir en favoris les chaînes que vous regardez fréquemment. 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . 2. ppuyez sur les bouton ▲ ou ▼ pour sélectionner “Liste des canaux”, puis A appuyez sur le bouton ENTER . TV Chaîne Antenna : Câble Prog. auto Effacer les canaux brouillés Liste des canaux Nom Syn. Précise Puissance signal Dépl.
Affichage de la liste des chaînes Vous pouvez afficher la liste de toutes les chaînes, des chaînes ajoutées ou de vos chaînes favorites. 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . 2. ppuyez sur les bouton ▲ ou ▼ pour sélectionner “Liste des canaux”, puis A appuyez sur le bouton ENTER. 3.
Nom des chaînes Les canaux peuvent être identifiés de sorte que leur indicatif d’appel respectif s’affiche lorsque vous sélectionnez un canal. 1. 2. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Nom”, puis appuyez sur le bouton ENTER . tilisez les bouton ▲ ou ▼ pour sélec tionner la chaîne à renom mer, puis U appuyez sur le bouton ENTER .
Syntonisation fine des chaînes analogiques La fonction de syntonisation fine permet d'optimiser la réception d'une chaîne. TV 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTER . 2. ppuyez sur les bouton ▲ ou ▼ pour sélectionner “Syn. Précise”, puis appuyez sur le A bouton ENTER . Chaîne Antenna : Air Prog. auto Effacer les canaux brouillés Liste des canaux Nom Syn.
Affichage PC Utilisation de votre télévision comme un écran PC Configuration de votre logiciel PC (basée surWindows XP) Les paramètres d’affichage Windows pour un ordinateur type sont indiqués ci-dessous. Cependant, les écrans réels de votre PC auront probablement un aspect différent, en fonction de votre propre version de Windows et de votre carte vidéo. Même si vos écrans réels apparaissent différents, les informations de base s’appliquent dans la plupart des cas.
Configurer votre téléviseur avec votre PC Comment utiliser le réglage automatique Utilisez la fonction "Réglage auto. en cours" pour que le téléviseur règle automatiquement les signaux vidéo qu’il reçoit. Cette fonction ajuste également automatiquement les paramètres, les fréquences et les positions. TV ette fonction n'est pas disponible en mode numérique DVI. C Préréglage : Appuyer sur la touche SOURCE pour sélectionner PC. 1. 2. ppuyez sur le bouton MENU pour afficher le menu.
Changement de la position de l’écran Régler la position de l’écran de l’ordinateur s’il ne correspond pas à celui du téléviseur Préréglage : Appuyer sur la touche SOURCE pour sélectionner PC. 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Image”, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Écran”, puis appuyez sur le bouton ENTER . 2.
Paramètre D’heure Régler l’horloge Régler l’horloge est nécessaire pour pouvoir utiliser les diverses fonctions relatives à l’heure de la télévision. Vous pouvez également contrôler l’heure pendant que vous regardez la télévision (appuyez juste sur le bouton INFO). Option 1: Réglage manuel de l'horloge 1. A ppuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER .
Option 2: Réglage Automatiquement de l'horloge L’horloge peut être automatiquement réglée si vous recevez un signal numérique. TV 1. A ppuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Heure”, puis appuyez sur le bouton ENTER . 2.
Paramétrer le minuteur Cette minuterie éteint automatiquement le téléviseur après le délai choisi (de 30, 60, 90, 120, 150 à 180 minutes). 1. 2. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Heure”, puis appuyez sur le bouton ENTER .
Réglage de la minuterie de mise en marche/arrêt 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Heure”, puis appuyez sur le bouton ENTER . TV Heure 1/ 1/2008 12 : 00 am Horloge ► 2. Trois réglages de minuterie (mise en marche/arrêt) peuvent être effectués.
Utilisation de la fonction puce V-Chip La fonction puce V exclut automatiquement les programmes qui sont considérés comme inappropriés pour les enfants. L’utilisateur doit d’abord entrer un code NIP (numéro d’identification personnel) avant de pouvoir spécifier ou modifier les restrictions de la fonction puce V. La fonction de contrôle parental “V-Chip” n’est pas offerte en mode HDMI, Composante ou PC.
Comment activer/désactiver la fonction puce V 1. A ppuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . TV Configuration Prêt à l’emploi ► Langue : Français ► Heure ► 2. A ppuyez sur les bouton ▲ ou ▼ pour sélectionner “V-Chip”, puis appuyez sur le bouton ENTER . Le message “Entrez NIP” s'affiche. Saisissez votre code NIP à 4 chiffres.
3. L 'écran “V-Chip” s'affiche. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Contrôle parental TV”, puis appuyez sur le bouton ENTER . TV V-Chip Blocage V-Chip : On ► Contrôle parental TV ► Classif. MPAA Anglais canadien ► ► Français canadien Catég. américaine téléchargeable ► ► Changer NIP 4. L 'écran “Contrôle parental TV” apparaît.
Comment configurer les restrictions à l’aide des évaluations MPAA: G, PG, PG-13, R, NC-17, X, NR Le système d’évaluation MPAA utilise le système de la Motion Picture Association of America (Association cinématographique américaine) (MPAA) dont la principale application concerne les films. (il arrive également que des vidéocassettes de films soient cryptées à l’aide des évaluations MPAA).
Comment configurer les restrictions à l’aide des ‘Anglais canadien’ 1. A ppuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . TV Configuration Prêt à l’emploi ► Langue : Français ► Heure ► V-Chip ► 2. A ppuyez sur les bouton ▲ ou ▼ pour sélectionner “V-Chip”, puis appuyez sur le bouton ENTER . Le message “Entrez NIP” s'affiche. Saisissez votre code NIP à 4 chiffres.
Comment configurer les restrictions à l’aide des ‘Français canadien’ 1. A ppuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . TV Configuration Prêt à l’emploi ► Langue : Français ► Heure ► 2. A ppuyez sur les bouton ▲ ou ▼ pour sélectionner “V-Chip”, puis appuyez sur le bouton ENTER . Le message “Entrez NIP” s'affiche. Saisissez votre code NIP à 4 chiffres.
Utilisation de la fonction V-Chip pour les canaux numériques Il est possible d’utiliser de l’information sur le contrôle parental tout en regardant des canaux numériques. 1. A ppuyez sur le bouton MENU pour afficher le menu. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . TV Configuration Prêt à l’emploi ► Langue : Français ► Heure ► V-Chip ► 2.
Affichage des sous-titres (messages texte à l'écran) – Analogique La fonction des sous-titres analogiques fonctionne en mode canaux de télévision ou lorsqu’un signal est fourni au téléviseur à partir d’un appareil externe. (Selon le signal émetteur, la fonction de sous-titrage analogique peut fonctionner sur les canaux numériques.) 1. 2. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER .
Affichage des sous-titres (messages texte à l'écran) – Numérique La fonction Sous-titres numériques concerne les chaînes numériques uniquement. 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . 2. ppuyez sur les bouton ▲ ou ▼ pour sélectionner “Sous-titres”, puis appuyez sur le A bouton ENTER . 3. ppuyez sur les boutons ENTER A pour sélectionner “Sous-titres”.
Réglage de la mélodie de mise sous/hors tension du téléviseur Vous pouvez choisir et configurer une mélodie qui se déclenchera à la mise en marche et à l'arrêt du téléviseur. 1. ppuyez sur le bouton MENU pour afficher le menu. A Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Configuration”, puis appuyez sur le bouton ENTER . TV Configuration Prêt à l’emploi ► Langue : Français ► 2. ppuyez sur les bouton ▲ ou ▼ pour sélectionner “Réglages externes”, puis A appuyez sur le bouton ENTER .
Mise à niveau du logiciel Ultérieurement, Samsung mettra à disposition des mises à niveau pour le logiciel du téléviseur. Contacter le centre d’appel Samsung au 1-800-SAMSUNG (726-7864) pour obtenir de l’information sur le téléchargement des mises à jour et sur l’utilisation d’une clé USB. Les mises à jour sont accessibles par le branchement d’une clé USB dans le port USB situé sur le téléviseur. 1.
Annexe Identification des problèmes n cas de problème, consultez d’abord la liste des problèmes potentiels et leurs solutions. E Si aucun de ces conseils ne permet de corriger le problème, communiquer avec le service à la clientèle de Samsung en composant le 1-800-SAMSUNG. Problème Solution possible Image de qualité médiocre. Essayez une autre canal. Réglez l’antenne. Vérifiez tous les branchements. Son de qualité médiocre. Essayez une autre canal. Réglez l’antenne. Aucune image ou aucun son.
Problème Solution possible Des barres horizontales et clignotent, scintillent ou tremblent sur l’image. Ajustez la fonction de réglage de base, puis réglez la fonction de réglage fin. Des barres verticales et clignotent, scintillent ou tremblent sur l’image. Ajustez la fonction de réglage de base, puis réglez la fonction de réglage fin. L’écran est noir et l’Indicateur d’alimentation clignote. A partir de votre ordinateur, vérifiez: l’alimentation, le câble signal.
Réglage du socle (LN19A450C1D, LN19A451C1D) Button (1) (2) 1. Placez la partie avant du téléviseur sur une table, en posant l’écran sur un chiffon doux ou un coussin, comme illustré à la figure (1). - Alignez le bas du téléviseur le long du bord de la table. 2. A ppuyez sur l’arrière du téléviseur, au centre. Réglez le pied comme illustré à la figure (2) tout en appuyant sur le bouton à l’arrière du pied. 3. Placez le téléviseur sur la table, de manière stable.
Installation du support 2 1 1. Connecter le téléviseur et le support. ➣ Deux personnes ou plus devraient porter le téléviseur. ➣ S’assurer de bien distinguer le devant et l’arrière du support lors de l’assemblage. ➣ Pour être sûr que le téléviseur est installé sur le support au niveau approprié, ne pas exercer de pression excessive sur les côtés supérieurs droit et gauche du téléviseur. 2. Resserrer les deux vis à la position 1 puis resserrer les deux (2) vis à la position 2.
Spécifications du jeu d’installation murale (VESA) Installez votre support mural sur un mur massif perpendiculaire au plancher. Pour le fixer à d’autres matériaux, veuillez communiquer avec votre détaillant. Si vous l’installez au plafond ou sur un mur incliné, il risque de tomber et de causer des blessures. Type de produit LCD-TV PDP-TV pouces Spéc.
Utilisation du verrouillage Kensington antivol (en fonction du modèle) Le verrouillage Kensington est un dispositif utilisé pour fixer physiquement le système dans le cas d’une utilisation dans un endroit public. Le dispositif de verrouillage doit être acheté séparément. L’aspect et la méthode de verrouillage peuvent différer de l’illustration en fonction du fabricant. Reportez-vous au manuel fourni avec le verrouillage Kensington pour une utilisation correcte.
Spécifications Modéle Taille de l’écran (diagonale) Résolution PC Son Sortie Dimensions (WxDxH) TV Avec support Poids Avec support Sans support Considérations environnementales Température de fonctionnement Humidité au cours du fonctionnement Température de stockage Humidité du stockage Socle orientable (Gauche/Droite) LN19A450C1D, LN19A451C1D LN22A450C1D, LN22A451C1D 19 pouces 22 pouces 1440 x 900 @ 60 Hz 1680 x 1050 @ 60 Hz 3W x 2 3W x 2 477,1 X 57,5 X 348,6 mm (18,8 X 2,3 X 13,7 pouces) 477,1 X