User manual

Category Description

RSA Key/

Pre-shared Key

/X.509 Cert

Selects host authentication method

- RSA Key: Public key is RSA key of Local settings. Click the [Download] button to store

RSA key to your PC, and send it to other PC through a path. After RSA key of Remote

settings receives file in the target PC through a path, click the [Upload] button to enter a

key value.

- Pre-shared Key: Authentication method entering password.

- X.509 Cert : Authenticate using your own certification and the CA certification. In the

Local settings side, enter the file name of your own certification directly, or click the [List]

button and select from the current authentication list.(If you select the Certification, the

Advanced Left ID is automatically entered). In the Remote settings side, click the

[Upload] button to upload the CA Certification of the other party. You can check the host

certification registered in Local and integrity.

If the ‘Router’ item value is not entered, the ‘IP address’ item of the Local settings and Remote

settings will be used as the ‘Router’ item.

If the ‘Subnet IP’ item value and the ‘Subnetmask’ item value are not entered in the Remote

settings, the security tunnel between local subnet and remote host will be added. Then, remote

IPSec client can operate as a part of local subnet.

Setting Router Value

If the IP address(in other words, the result of netmasking the IP Address)of ‘Local settings’ is the

same as the ‘IP Address’ of ‘Remote settings’, enter the ‘IP Address’ of ‘Remote settings’ in the

‘Router’ of ‘Local settings’, and enter the ‘IP Address’ of ‘Local settings’ in the ‘IP Address’ of

‘Remote settings’.

Setting Connection ID

Connection ID should be English alphabets or the combination of English alphabets and

numbers, and the first letter should start with English alphabet.(ID should not be configured

using numbers only.)

Home Page

Table of Contents