User manual

© SAMSUNG Telecommunications America, L.P.
30
WAN1 Setup
1. The starting window for setting WAN1 as “Primary WAN line’ is shown below. Click
the [Next] button to start setting the WAN1 port.
2. Select the line type for Primary WAN line. Select one of the four applications shown
below for the external network:
Fixed IP: Select Fixed IP if your Internet service account uses Fixed IP (Static) IP
assignment.
• Primary PPPoE Client: Select Primary PPPoE Client if your Internet service
account uses PPP over Ethernet login protocol, such as in ADSL account.
• Primary DHCP Client: Select Primary DHCP Client if your Internet service
account uses Dynamic IP assignment, such as in Cable Modem account.
• Primary VDSL Line: Select Primary VDSL Line if your Internet service account
uses VDSL service.
The four applications of Primary WAN line are described below:
a. Fixed IP: Enter values in the Address, Netmask, and Gateway fields to perform
settings in the WAN1 port on an external network where a static IP is used, and
click the [Next] button. To add another IP, apart from the IP of the external line
currently being used, click the [Add] button and add the item. OfficeServ 7200
WAN interface supports up to eight multiple public IP addresses.
Home Page
Table of Contents