User manual

© Samsung Telecommunications America, L.P. 2
4. Select Use the following IP address. Set the IP address to the following:
IP Address: select from the range of 10.0.0.2 – 10.0.0.254
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
5. Click the OK button to complete the PC configuration.
STEP 3: WIM Software Upgrade
1. Open Microsoft Internet Explorer (version 6.0 or above) and enter the IP address of the LAN port
on the WIM module in its Address field (The default is 10.0.0.1). Press the Enter key.
2. A password request screen will appear. Enter the default ID and Password, (the default ID and
Password are admin, admin in the lowercase letters). Then click the OK button and following
screen will appear:
3. Click on Data, and select System on the top menu bar. Under System, the sub-menu will appear
on the left hand side of the panel. Select Upgrade -> Package, as shown in the figure on the
following page.
Home Page
Table of Contents