User manual

13.

Configuring Port Forwarding

Go to [Firewall/Network] -> [Management] -> [Port Forward] to configure Port Forwarding.

Although OfficeServ 7200 NAT router prevents Internet users from directly accessing the PCs

on the LAN, the firewall allows you to direct incoming traffic to specific PCs based on the

service port number of the incoming request. If a range of port is required to be specified,

use the ‘Static NAPT’ menu.

14.

Configuring Port Access Control List

Go to [Firewall/Network] -> [Management] -> [Port ACL] to configure Port Access Control

List. As the ‘Packet Filtering’ service is enabled, all external networks are restricted from

accessing the Data Server. The Data Server Access Control List allows specific external

servers or hosts to access the firewall based on port and protocol. If the port is set to ‘0:’, the

access to all ports is allowed. Click the [OK] button to move to the next step.

Home Page

Table of Contents