User manual

• If the shunt pin of JP1, 2, 3, 4 is directed to the front of the WIM board, connect the

LAN port of the WIM board to one of the Ethernet port of the LIM board through a

LAN cable.

Connect a PC to a Ethernet port of the LIM board.

Configuring the PCs

This section describes how to configure your PC to communicate with the OS 7200 Data

Server Management Web Browser.

The instructions below apply only to Windows 2000 or XP computers. Make sure that an

Ethernet card or adapter has been successfully installed in your PC.

Click the [Start]button. Click [Settings] and then [Control Panel]. From there, double-

click the [Network] icon.

On the [Configuration] tab, select the Internet Protocol (TCP/IP) line for the

applicable Ethernet adapter. Click the [Properties] button.

Home Page

Table of Contents