User manual

118

DSMI Configuration

Set Data Server Module Interface (DSMI) environment on the [DSMI Configuration] menu.

SM Interface

System Manager is a network management tool which will be available in the future release.

This menu is reserved for the future usage once the System Manager application is available.

The item related with message data transmission for the communication with System

Manager(SM) can be set in the [SM Interface] menu. Since the network traffic and system are

overloads when much message data is transferred, the user should control whether to transfer

message data and transmission interval.

If message data is sent based on UDP, select whether to send the data as shown above. If

message data is sent based on TCP, the user is not required to select whether to send the data

because messages data is sent when the system manager requires.

Since the TCP port is set to ‘5020’ and the UDP port is set to ‘5025’, the value should not be

changed.

Information on the SM Manager can be entered. This window displays the information received

from the Call Server.

Home Page

Table of Contents