BN68-00597A-01 4/2/04 6:38 PM Page 1 PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
BN68-00597A-01 4/2/04 6:38 PM Page 2 User Instructions ENG ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of this screen when displaying a still image. ◆ Cell Defect The plasma display panel consists of fine cells.
BN68-00597A-01 4/2/04 6:38 PM Page 3 ENG Checking Parts Sold Separately Owner’s Instructions S-VIDEO Cable DVI Cable Component Cables (RCA) PC Cable Remote Control/ AAA Batteries Ferrite Core for Speaker Wire Ferrite Core for Side AV Cable Power Cord Antenna Cable Scart Cable PC Audio Cable Ferrite Cores The ferrite cores are used to attenuate undesired signals. When connecting cables, attach one of these ferrite cores to the cable near the connector.
BN68-00597A-01 4/2/04 6:38 PM Page 4 ENG Contents ◆ FOREWORD ■ User Instructions............................................................................................ 2 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Your New Plasma Display Panel................................................................... Infrared Remote Control ................................................................................ Inserting the Batteries in the Remote Control...............
BN68-00597A-01 4/2/04 6:38 PM Page 5 ENG Contents (continued) ◆ USING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Adjusting the Sound Settings ........................................................................ Adjusting the Volume Automatically .............................................................. Setting the TruSurround XT........................................................................... Selecting the Internal mute..........................................................................
BN68-00597A-01 4/2/04 6:38 PM Page 6 Your New Plasma Display Panel ➢ ENG Front Panel Speaker a) SOURCE External input selection. b) MENU Menu display. c) - + Volume adjustment. d) C/P. Channel selection. Auto power On. e) Confirm your choice (Store or Enter) f) I / Press to turn the PDP on and off. 6 The actual configuration on your PDP may be different, depending on your model.
BN68-00597A-01 4/2/04 6:38 PM Page 7 Your New Plasma Display Panel (continued) ➢ The actual configuration on your PDP may be different, depending on your model. ENG Side of the TV S-Video Input Video Input Audio Input (L, R) Rear Panel ➢ For further details about connection, refer to pages 55~59. a) DVI INPUT (DVI-D / L-AUDIO-R) Connect to the digital video and audio output jack for device with DVI output.
BN68-00597A-01 4/2/04 6:38 PM Page 8 Infrared Remote Control ENG TURNS THE PDP ON AND OFF WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECTED MODE (TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LCD PICTURE EFFECT SELECTION SOUND EFFECT SELECTION TELETEXT CANCEL MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CATV, DVD PLAYER, STB DIRECT CHANNEL SELECTION AUTOMATIC SWITCH-OFF/ TELETEXT SUB-PAGE PICTURE SIZE/ TELETEXT SIZE SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF VOLUME DECREASE
BN68-00597A-01 4/2/04 6:38 PM Page 9 Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.
BN68-00597A-01 4/2/04 6:38 PM Page 10 Installing the Display on the Wall Attachment Panel ENG Installation Notes ◆ Do not install the PDP on any place other than vertical walls. ◆ To protect the performance of the PDP and prevent troubles, avoid the followings: - Do not install next to smoke and fire detectors. - Do not install in an area subjected to vibration or high voltage. - Do not install near or around any heating apparatus. ◆ Use only recommended parts and components.
BN68-00597A-01 4/2/04 6:38 PM Page 11 Installing the Display on the Wall Attachment Panel (continued) ➢ The exterior of the PDP may be different than the picture. (Assembly and installation of the plastic hanger is the same.) 1 Remove the screws from the back of the PDP. 2 ENG Use the screws and assemble the plastic hanger. ☛ ◆ Please ask the installers to install the wall mount bracket.
BN68-00597A-01 4/2/04 6:38 PM Page 12 Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network Rear of the PDP or Cable Television Network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the PDP.
BN68-00597A-01 4/2/04 6:38 PM Page 13 Switching On and Off ENG The mains lead is attached to the rear of your PDP. 1 Plug the mains lead into an appropriate socket. Result: ➢ 2 Front of the PDP The Standby indicator on the front of the PDP lights up. The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz. Press the “ I / ” button on the front of the PDP (or POWER ( button on the remote control) to switch the PDP on.
BN68-00597A-01 4/2/04 6:38 PM Page 14 Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to SLEEP Menu Function Used to display the next stored channel. - Used to display the previous stored channel. - Used to display the corresponding channels.
BN68-00597A-01 4/2/04 6:38 PM Page 15 Setting Up Your Remote Control ENG This PDP’s remote control can operate VCR, CATV , DVD, or Settop box (STB), in addition to controlling the PDP. ➣ The remote control is not compatible with the TV manufactured by another company. 1 Turn off your VCR, Cable box, DVD or STB. 2 Press the SELECT button. Mode is changed whenever SELECT button is pressed. 3 Press the POWER ( ) button on the remote control. The component you select should turn on.
BN68-00597A-01 4/2/04 6:38 PM Page 16 Plug & Play Feature ENG Plug & Play Press ENTER to Start Plug & Play When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available.
BN68-00597A-01 4/2/04 6:38 PM Page 17 Plug & Play Feature (continued) ENG If you want to reset this feature... 1 2 TV Press the MENU button. The main menu is displayed. Result: Press the ENTER ( 4 Press the † or … button to select Miscellaneous. Press the ENTER ( ) button. The options available in the Miscellaneous group are Result: displayed. 6 : English √ √ AV Setup Press the † or … button to select Setup. The options available in the Setup group are displayed.
BN68-00597A-01 4/2/04 6:38 PM Page 18 Storing Channels Automatically ENG TV Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button.
BN68-00597A-01 4/2/04 6:38 PM Page 19 Storing Channels Manually ENG You can store up to 100 television channels, including those received via cable networks. TV Channel Country When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ Move 1 Enter Return Press the MENU button.
BN68-00597A-01 4/2/04 6:38 PM Page 20 Storing Channels Manually (continued) ENG 7 Manual Store Prog. Colour System Sound System 9 Auto BG Channel Search Store C -- 59MHz ? If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button to select Channel. ◆ Press the † or … button to select C (Air channel) or S (Cable channel). ◆ Press the √ button. œ √ Move Adjust Return ◆ Press the numeric buttons (0~9) to select indicate the required number.
BN68-00597A-01 4/2/04 6:38 PM Page 21 Skipping Unwanted Channels ENG ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ Press the MENU button.
BN68-00597A-01 4/2/04 6:38 PM Page 22 Sorting the Stored Channels ENG TV This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using ATM. You can delete those channels you do not want to keep. Channel Country : Austria √ Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch.
BN68-00597A-01 4/2/04 6:38 PM Page 23 Assigning Names to Channels ENG Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 4 8 √ Fine Tune √ Ch. Scan √ ) Return Edit Add/Delete √ Sort √ √ Name LNA √ : Off √ Child Lock ) The Name menu is displayed with the current channel automatically is selected. Move Enter Prog. 2 3 4 5 6 Arrow indications are displayed around the name box.
BN68-00597A-01 4/2/04 6:38 PM Page 24 Using the LNA (Low Noise Amplifier) Feature ENG TV Channel Country : Austria √ Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. 1 Result: 2 Move Enter TV Return Edit Add/Delete √ Sort √ √ Name LNA Press the ENTER ( 4 Press the † or … button to select Edit. Press the ENTER ( button.
BN68-00597A-01 4/2/04 6:38 PM Page 25 Activating the Child Lock ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. 1 Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch.
BN68-00597A-01 4/2/04 6:38 PM Page 26 Displaying Information ENG You can view the channel information and setting status you select by pressing the “INFO ( )” button on the remote control. Mono P1 ✽ Picture Sound 00 : 00 : Dynamic : Music Changing the Picture Standard TV You can select the type of picture which best corresponds to your viewing requirements.
BN68-00597A-01 4/2/04 6:38 PM Page 27 Adjusting the Picture Settings ENG Your television has several settings which allow you to control picture quality. 1 The main menu is displayed. Press the † or … button to select Picture. Result: The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Select the required option (Custom, Colour Tone) pressing the † or … button. 5 Press the † or … button to select Custom. Press the ENTER ( ) button.
BN68-00597A-01 4/2/04 6:38 PM Page 28 Adjusting the Picture Settings (PC or DVI Mode) ➢ ENG Preset to the PC or DVI mode by using the SOURCE button. 1 TV Press the MENU button. Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move : Custom : Off : 16 : 9 : On Enter TV √ √ √ √ √ √ √ √ : High Result: Press the † or … button to select Picture. 2 Result: 3 Press the ENTER ( 4 Press the † or … button to select Custom. Press the ENTER ( ) button.
BN68-00597A-01 4/2/04 6:38 PM Page 29 Setting the Picture (PC Mode) ➢ 1 Preset to the PC mode by using the SOURCE button. ENG Press the MENU button. TV Result: 2 The main menu is displayed. Press the ENTER ( 4 Press the † or … button to select PC Setup. Press the ENTER ( ) button. √ Digital NR 5 Miscellaneous √ PC Setup √ ) button. Enter TV The options available in the PC Setup group are displayed. Press the † or … button to select Image Lock. Press the ENTER ( ) button.
BN68-00597A-01 4/2/04 6:38 PM Page 30 Setting the Picture (PC Mode) ➢ ENG 12 TV PC Setup Image Lock √ Position √ Information √ Auto Adjustment √ Preset to the PC mode by using the SOURCE button. If you get the PC information, select the Information by pressing the † or … button. Press the ENTER ( ) button. Result: 13 Enter Information Resolution : 1024 ✻ 768 : 48.5KHz V-Frequency : 60.
BN68-00597A-01 4/2/04 6:38 PM Page 31 Using the Fine Tune ENG If reception is weak, you can fine tune a channel manually. TV 1 Press the MENU button. Result: 2 The main menu is displayed. Press the † or … button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Fine tune. Press the ENTER ( ) button. Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch.
BN68-00597A-01 4/2/04 6:38 PM Page 32 Viewing the Channel Scan Picture ENG TV 1 Channel Country √ : Austria Auto Store √ Manual Store √ Edit √ Fine Tune √ Ch. Scan √ Move Enter Return Press the MENU button. Result: 2 The main menu is displayed. Press the † or … button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Ch. Scan. Press the ENTER ( ) button. ) button. Ch.
BN68-00597A-01 4/2/04 6:38 PM Page 33 Selecting the Picture Size ENG You can select the picture size which best corresponds to your viewing requirements. 1 3 4 5 The main menu is displayed. Press the † or … button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER ( ) button. Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Press the MENU button.
BN68-00597A-01 4/2/04 6:38 PM Page 34 Selecting the Film Mode ENG TV You can automatically sense and process film signals from some sources and adjust the picture for optimum quality. Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move : Dynamic : Normal : Off : 16 : 9 : On Enter TV √ √ √ √ √ √ √ √ Move Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Picture. The options available in the Picture group are displayed.
BN68-00597A-01 4/2/04 6:38 PM Page 35 Setting the Blue Screen ENG TV If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“. Setup √ Time Language : English Digital NR 1 Press the MENU button. Result: 2 : On √ PC Setup √ Move The options available in the Setup group are displayed. Enter TV 4 Press the ENTER ( ) button.
BN68-00597A-01 4/2/04 6:38 PM Page 36 Viewing the Picture In Picture (PIP) ENG TV Picture Mode Custom Colour Tone Colour Control Film Mode Size DNIe PIP Move : Dynamic : Normal : Off : 16 : 9 : On Enter √ √ √ √ √ √ √ √ PIP Source Swap Size Position Prog. : On Off : TV On : : :P8 Move 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Picture. The options available in the Picture group are Result: displayed.
BN68-00597A-01 4/2/04 6:38 PM Page 37 Viewing the Picture In Picture (PIP) (continued) ENG PIP TV PIP Source Swap Size Position Prog. Press the † or … button to select Position. Press the ENTER ( ) button. 9 Result: The positions available are displayed. - Press the † or … button to select Prog.. Select the channel that you want to view through sub picture by pressing the ENTER ( ) button.
BN68-00597A-01 4/2/04 6:38 PM Page 38 Using the Digital NR (Digital Noise Reduction) Feature ENG TV Setup √ Time Language : English If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. √ √ AV Setup Digital NR √ : On 1 Press the MENU button. The main menu is displayed. Result: 2 Press the ▲ or ▼ button until the Setup is selected. The options available in the Setup group are displayed.
BN68-00597A-01 4/2/04 6:38 PM Page 39 Changing the Sound Standard ENG You can select the type of special sound effect to be used when watching a given broadcast. TV Sound Mode 1 2 √ Equalizer Press the MENU button. Result: The main menu is displayed. Auto Volume : Off √ SRS TSXT : Off √ Internal Mute : Off √ Press the † or … button to select Sound. Result: The options available in the Sound group are displayed.
BN68-00597A-01 4/2/04 6:38 PM Page 40 Adjusting the Sound Settings ENG The sound settings can be adjusted to suit your personal preferences. TV Sound Mode √ : Standard 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Sound. The options available in the Sound group are displayed. Result: 3 Press the ENTER ( 4 Press the † or … button to select Equalizer. Press the ENTER ( ) button. The Equalizer menu is displayed with the current Result: option.
BN68-00597A-01 4/2/04 6:38 PM Page 41 Setting the TruSurround XT ENG TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
BN68-00597A-01 4/2/04 6:38 PM Page 42 Selecting the Sound Mode (depending on the model) ENG The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I ” or “Stereo”, depending on the current transmission.
BN68-00597A-01 4/2/04 6:38 PM Page 43 Setting the Sleep Timer ENG You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Setup √ Time Press the MENU button. Result: 2 TV Language The main menu is displayed. Digital NR The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the † or … button to select Time. Press the ENTER ( button.
BN68-00597A-01 4/2/04 6:38 PM Page 44 Setting and Displaying the Current Time ENG TV Setup √ Time Language : English You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➣ √ √ AV Setup Digital NR √ : On Miscellaneous √ PC Setup √ Move Enter TV 1 Press the MENU button. The main menu is displayed. Result: 2 Press the ▼ or ▲ button to select Setup.
BN68-00597A-01 4/2/04 6:38 PM Page 45 Switching the Television On and Off Automatically ENG You can set the television’s clock and set the On or Off timers so that the television will: TV Setup ◆ Switch on automatically and tune to the channel of your choice at the time you select Time ◆ Switch off automatically at the time you select AV Setup ➣ √ Language √ Digital NR The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on the previous page).
BN68-00597A-01 4/2/04 6:39 PM Page 46 Viewing an External Signal Source ENG TV Input Source List √ : TV Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxs and the TV source (broadcast or cable) √ Edit Name 1 Press the MENU button. Result: Press the ▼ or ▲ button to select Input. 2 Move Enter TV Return Source List TV Ext.1 Ext.2 Ext.
BN68-00597A-01 4/2/04 6:39 PM Page 47 Redirecting an Input to the External Output ENG Your television enables you to choose which audio/video signals are output to the external connector. TV Setup √ Time 1 2 Press the MENU button. Language Result: Digital NR 3 The main menu is displayed. The options available in the Setup group are displayed. Press the ENTER ( Miscellaneous √ PC Setup √ Move Enter 5 6 The AV Setup menu is displayed.
BN68-00597A-01 4/2/04 6:39 PM Page 48 Teletext Feature ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text.
BN68-00597A-01 4/2/04 6:39 PM Page 49 Displaying the Teletext Information ENG You can display Teletext information at any time on your television Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or button. 2 Press the TTX/MIX ( Result: ) button to activate the teletext mode. The contents page is displayed.
BN68-00597A-01 4/2/04 6:39 PM Page 50 Selecting Display Options ENG When you have displayed a Teletext page, you can select various options to suit your requirements. To display... TV 50 Press the...
BN68-00597A-01 4/2/04 6:39 PM Page 51 Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
BN68-00597A-01 4/2/04 6:39 PM Page 52 TeleWeb Feature (Option) ENG TV Setup Time Language AV Setup Digital NR Miscellaneous PC Setup TeleWeb : On Move Enter √ √ √ √ √ √ √ : English Return TeleWeb is the new television broadcasting standard for Teletext services. TeleWeb is similar to Teletext, just easy to use. TeleWeb can transmit the News, TV programme information, and advertising in excellent picture quality and directly access via the remote control. 1 Press the MENU button.
BN68-00597A-01 4/2/04 6:39 PM Page 53 Using the TeleWeb Menu after Displaying the TeleWeb ENG Bookmarking the current page. TeleWeb 1 On the page you wish to add to the bookmark list press the MENU button. Result: 2 The TeleWeb menu is displayed. Press the † or … button to select Add Bookmark. Press the ENTER ( ) button. √ Bookmark List Add Bookmark Home Page Current programme. Selected provider. Result: ➢ The current page is added to the bookmark list. You can register up to six pages.
BN68-00597A-01 4/2/04 6:39 PM Page 54 Easy Accessing the TeleWeb Service via the Remote Control ENG Button TeleWeb Function Activate or deactivate the TeleWeb feature directly. Display the forward page of the TeleWeb Display the backward page of the TeleWeb Select a option. Confirm your choice.
BN68-00597A-01 4/2/04 6:39 PM Page 55 Connecting to the External Devices ENG “MONITOR OUT” are used for the equipment with an RGB output, such as video game devices or video disc players.
BN68-00597A-01 4/2/04 6:39 PM Page 56 Connecting to the S-Video Input ENG The S-VIDEO1 and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the TV ① and Camcorder Side of the TV ① VCR and ① To play picture and sound, both the S-VIDEO and RCA connectors must be used. ☛ 56 Whenever you connect an audio or video system to your television, ensure that all elements are switched off.
BN68-00597A-01 4/2/04 6:39 PM Page 57 Connecting to the DVI Input ENG The “DVI” (video) and “L-AUDIO-R” connectors are used for equipment with a DVI output. Rear of the TV Personal Computer and Connecting to the PC Input The “RGB” (video) and “AUDIO” connectors are used for interfacing with your PC.
BN68-00597A-01 4/2/04 6:39 PM Page 58 Connecting to the Component Input ENG Rear of the TV ① The “COMPONENT 1” connectors are ① DVD ② used for equipment with a DVD output. (480i/480p/576i/576p/720p/1080i) DTV receiver ② The “COMPONENT 2” connectors are used for DTV receiver. (480i/480p/576i/576p/720p/1080i) Connecting Additional Speakers Rear of the TV To take advantage of the surround sound system, connect additional speakers.
BN68-00597A-01 4/2/04 6:39 PM Page 59 Connecting and Using the Home Theater System ENG Use the Monitor Out ports of the PDP for Home Theater System Connections. Rear of the TV Connecting the Home Theater System ① Connect the monitoring audio out L, and R jacks of the MONITOR OUT on the rear-side connection panel of the PDP TV to the AUDIO IN jacks of the DVD Home Theater System (or AV Receiver) using the audio cable.
BN68-00597A-01 4/2/04 6:39 PM Page 60 Installing the Speakers ➢ ENG This speaker installation guide is for the 4240 Model. Parts How to Assemble the Speakers (Standing) The actual product may differ slightly from the illustration. ① Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides). Speakers 2 EA ② Attach the Bracket Pads to the Speaker’s Guide Bracket.
BN68-00597A-01 4/2/04 6:40 PM Page 61 Installing the Speakers (continued) ENG Parts How to Assemble the Speakers (Wall Mount) The actual product may differ slightly from the illustration. ① Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center). Speakers 2 EA ② Attach the Bracket Pads to the Speaker’s Guide Bracket.
BN68-00597A-01 4/2/04 6:40 PM Page 62 Setting up Your PC Software (Windows only) ENG The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
BN68-00597A-01 4/2/04 6:40 PM Page 63 Input Mode (PC/DVI) ENG Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Dot x Line 640 x 350 640 x 400 720 x 400 640 x 480 IBM PC / AT Compatible 800 x 600 848 x 480 1024 x 768 Vertical frequency (Hz) Horizontal frequency (kHz) Vertical polarity Horizontal polarity 70.086 85.080 85.080 70.087 85.039 59.940 72.809 75.000 85.
BN68-00597A-01 4/2/04 6:40 PM Page 64 Pin Configurations ENG SCART Connector (AV1/AV2/AV3) ➢ Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are only wired on the AV1 or AV2 or AV3 connector.
BN68-00597A-01 4/2/04 6:40 PM Page 65 Troubleshooting: Before Contacting Service Personnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ I ” button (On/Off) and the POWER ( ) button.
BN68-00597A-01 4/2/04 6:40 PM Page 66 Programming the Remote Control for Other Components ENG CABLE CODE LIST Anvision GI Hamlin Hitachi Jerrold Macom Magnavox Oak Panasonic Philips Pioneer RCA Regal Regency SA Samsung Scientific Atlanta Sprucer Stargate 2000 Sylvania Texscan Tocom Universal Viewstar Wamer amex Zenith 66 017, 018 041 003, 024, 031 025, 030 038, 039 025, 030 019, 023, 028 026 003, 022, 027, 037, 044 019, 021, 023, 028 018, 020, 004, 044 014, 022, 040 003 015, 023 042, 043 000, 001, 0
BN68-00597A-01 4/2/04 6:40 PM Page 67 Programming the Remote Control for Other Components (continued) ENG VCR CODE LIST Admiral 020 Aiwa 025 Akai 027, 004, 032 Audio Dynamics 007, 026 Bell&Howell 018 Broksonic 022 Candle 002, 006, 003, 015, 008, 055 Canon 021, 056 Citizen 002, 006, 003, 015, 008, 055 Colortyme 007 Craig 002, 024 Curtis Mathes 002, 017, 007, 008, 021, 025, 056, 064, 066 Daewoo 003, 015, 010, 011, 012, 013, 014, 016 DBX 007, 026 Dimensia 017 Dynatech 034 Emerson 001, 003, 006, 021, 022,
BN68-00597A-01 4/2/04 6:40 PM Page 68 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
