SyncMaster 320P Install Programs
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug.
z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. z An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. z A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
z This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. z Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area. z Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children. Do not place the product on the floor.
Installing a wall bracket must be done by a qualified professional. z z Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes. z Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
Contact the Service Center or Customer Center for interior cleaning once a year. z Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. Others Do not remove cover (or back). z z This may cause an electric shock or fire. Refer servicing to qualified service personnel.
Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. z z This may cause malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center. Keep the product away from combustible chemical sprays or inflammable substances. z This may cause an explosion or fire.
Do not install the product on an unstable, uneven surface or a location prone to vibrations. z Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor.
public recycling center or to a store selling the same type of the battery or rechargeable battery.
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. This stand is not for the Floor Standing Type.
D-Sub Cable Power Cord Speaker Wire Cable Wall Mount KIT Speaker Set Stand KIT Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Adapter Jack Semi Stand Sold separately DVI Cable Others
Front 1. MENU 6. PIP 2. Navigate button (Up-Down button) 7. Power button 3. Adjust button (Left-Right button)/ Volume button 8. Power indicator 4. ENTER 9. Remote Control Sensor 5. SOURCE 1. MENU Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. Navigate buttons (Up-Down button) Moves from one menu item to another vertically or adjusts selected menu values. 3.
for long periods. Rear For detailed information concerning cable connections, refer to Connecting Cables under Setup. The monitor's rear configuration may vary slightly depending on the monitor model. 1. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Display Control) Program Port 2. DVI IN(HDCP) (PC Video Connection Terminal) : Using DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) 3. PC IN(RGB) (PC Video Connection Terminal) : Using D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) 4.
5. COMPONENT AUDIO IN [L-AUDIO-R](Component Audio Connection Terminal (Input)) 6. BNC/COMPONENT OUT (BNC/Component Connection Terminal (Output)) - BNC (Analog PC) Connection : connecting R, G, B, H, V port - Component Connection : connecting PR, Y, PBport 7. BNC/COMPONENT IN (BNC/Component Connection Terminal (Input)) 8. AV AUDIO IN [L-AUDIO-R](Monitor Audio Connection Terminal (Input)) 9. AV OUT [VIDEO](VIDEO Connection Terminal) : AV mode (Output) 10.
17. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately. ) For using a locking device, contact where you purchase it. See Connecting the Monitor for further information regarding cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic devices operated near the monitor, causing malfunction due to interference with frequency. 1.
28. 29. 1. ON / OFF Use these buttons to turn the monitor on or off. 2. MAGICNET MagicNet Quick Launch Button. - This fuction does not work for this monitor. 3. MDC MDC Quick Launch Button. 4. LOCK This button will activate or deactivate all function keys on both the remote control and the monitor except for the Power and LOCK buttons. 5. MagicNet buttons - Used for MagicNet. z z z z Alphanumeric: Used to enter the Internet address. DEL : Functions as the backspace. SYMBOL : Used to enter the symbols. (.
14. SOURCE Push this button to change video sources. 15. INFO Current picture information displays on the upper left corner of the screen. 16. EXIT Exits from the menu screen. 17. Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 18. P.MODE (M/B) When you press this button, current picture mode is displayed on the lower center of the screen. AV / S-Video / Component : P.
Play/Pause 29.
Mechanical Lay-out | Monitor Head | Stand | Speaker | Installation VESA Bracket | Wall Bracket Installation 1. Mechanical Lay-out 2.
3. Stand 4. Speaker 5. Installation VESA Bracket z z z z When installing VESA, make sure to comply with the international VESA standards. Purchasing VESA Bracket and Installation Information : Please contact your nearest Samsung Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. At least 2 persons are needed in order to move the LCD Monitor.
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. 6. Wall Bracket Installation z z z Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
3 1. Insert three Hangers of the set-bracket B into the grooves of the wall-bracket A. 2. Fix set-bracket B and wall-bracket A with screws D. Before installing the set on the wall, connect the cables to the set first.
Installing Stand Kit Only the supplied bolts should be used. Samsung Electronics will not be responsible for damages caused by using a base other than those specified. 1. Installing the Semi Stand Left stand Right stand Make sure to install the stand with Caution label folded backward. 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
3. Put the stand into the hole at the bottom of the monitor. Insert screw into the hole indicated and tighten. (M4 × L15) This stand is originally designed for the adjustment of the screen angle. And the company is not responsible for any problem caused by any use of this stand. Do never use the product as a stand on which something is placed. 2. Installing Stand Kit (sold separately) 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
Connecting to a Computer | Connecting to a VCR | Connecting to a DVD Player | Connecting a Camcorder Connecting DTV Set Top Box | Connecting Speakers | Connecting to an Audio System 1. Connecting to a Computer 1. Connect the power cord for your monitor to the power port on the back of the monitor. Trun on power switch. 2. There are 3 ways to connect the signal cable to your monitor. Choose one of the followings : 2-1. Using the D-sub (Analog) connector on the video card.
DVI cable or BNC cable is optional. 3. Connect the audio cable for your monitor to the audio port on the back of your computer. 4. Turn on both your computer and the monitor. Contact a local Samsung Electronics Service Center to buy optional items. 2. Connecting to a VCR 1. AV input devices like VCRs or Camcorders are connected to the AV IN [VIDEO] or AV IN [S-VIDEO] of the monitor using the S-VHS or BNC cable. S-VHS or BNC cable is optional. 2.
1. Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the DVD player. 2. Connect a Component cable between the BNC/COMPONENT IN - PR, Y, PB port on the Monitor and the PR, Y, PB jacks on the DVD player. Component cable is optional. 3. Select Component that is connected to a DVD player using the Source button on the monitor's front or remote control. 4. Then, start the DVD Player with a DVD disc inserted.
1. Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the Set Top Box. 2. Connect a Component cable between the BNC/COMPONENT IN - PR, Y, PB port on the Monitor and the PR, Y, PB jacks on the Set Top Box. 3. Select Component that is connected to a DTV Set Top Box using the Source button on the monitor's front or remote control. For an explanation of Component video, see your Set Top Box owner's manual. 6. Connecting Speakers 1.
7. Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the MONITOR OUT [L-AUDIO-R] on the Monitor. 1. Introduction 2. Beginning : Main Screen | Port Setting | 3. Power Control 4. Input Source Control 5. Image Size Control : PC, BNC, DVI | AV, S-Video, Component, DVI(HDCP) 1. Introduction 6. Time Control 7. PIP Control : PIP Size | PIP Source 8. Settings Control : Picture | Picture PC | Audio | Image Lock | 9.
A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. 2. Main Screen Click Start > Program > Multiple Display Control to start the program. Select a set to see the volume of the selected set within the slider.
Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the display unit. 3. The setting for the PC Serial Port can change. The original value is COM1. 4. Sets the Lock Function. 5. Click Select all or Clear to select or clear all displays. 6. Use Grid to view brief information on selected display. 7.
1. Multiple Display Control is originally set to COM1. 2. If any port other than COM1 is used, COM1 to COM4 can be selected in Port Selection Menu. 3. If the exact port name which is connected to the monitor using a serial cable is not selected, communication will not be unavailable. 4. The selected port is stored in the program and used for the next program as well. 3. Power Control 1. Click Power Control of the main icons and the Power Control screen appears.
Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off. 2) Volume Control - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the slider. (When you cancel the selection or choose Select All, the value returns to the default value 10) 3) Mute On/Off - Enables/disables the Mute function of the selected display.
3) DVI - Changes the Input Source of the selected display to DVI. 4) AV - Changes the Input Source of the selected display to AV. 5) S-Video - Changes the Input Source of the selected display to S-Video. 6) Component - Changes the Input Source of the selected display to Component. 7) MagicNet - The Input source of MagicNet works only on MagicNet model. The Input Source Control feature is available only for the displays whose power status is ON. 5. Image Size Control - PC, BNC, DVI 1.
Info Grid shows some basic information necessary to Image Size Control. 1) Click the AV, S-Video, Component tab to adjust Image Size for AV, S-Video, Component. Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having AV, S-Video, Component or DVI(HDCP) as input source. 3) Switch Image Size of the selected display randomly. Panorama, Zoom1 and Zoom2 are not available for selection when the input signal type for Component and DVI (HDCP) is 720p or 1080i.
The Input source of MagicNet works only on MagicNet model. 7. PIP Control - PIP Size 1. Click PIP of the main icons and the PIP control screen appears. Click Select All or use Check Box to select a display to control. Info Grid shows some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the PIP of the selected display. 3) Large - Turns on the PIP of the selected display and changes the size to Large.
Info Grid shows some basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the monitor power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC. 4) DVI - Changes the source of the PIP of the selected display to DVI. 5) AV - Changes the source of the PIP of the selected display to AV. 6) S-Video - Changes the source of the PIP of the selected display to S-Video.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture - Available only for AV, S-Video, Component, DVI(HDCP). 2) Contrast - Adjusts Contrast of the selected display. 3) Brightness - Adjusts Brightness of the selected display.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture PC - Available only for PC, BNC, DVI. 2) Contrast - Adjusts Contrast of the selected display. 3) Brightness - Adjusts Brightness for the selected display.
When Select All is selected, the default value (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Audio - Controls audio settings for all input sources. 2) Bass - Adjusts Bass of the selected display. 3) Treble - Adjusts Treble of the selected display. 4) Balance - Adjusts Balance of the selected display. 5) Dolby Virtual - Dolby Virtual Sound On/Off of the selected display. 6) BBE - BBE Sound On/Off of the selected display.
An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows Maintenance Control for all input sources. 2) Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 3) Manual Lamp Control - Allows you to adjust the backlight of the selected display regardless of the time.
1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen. 1) Video Wall - A video wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Screen Divider - The screen can be divided into. You can select a number of screens with a different layout when dividing. Select a mode from Screen Divider. Select a display from Display Selection.
The Maintenance Control function is available only for the displays where the power status is ON. The Input source of MagicNet works only on MagicNet model. 12. Troubleshooting 1. The display you wish to control does not appear on the Power Control Info Grid - Check the connection of RS232C. (Check if it is properly connected to the Com1 port) - Check the displays to see if any of the other displays connected have the same ID.
One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI).
Input Available Mode OSD Source List : PC / BNC / DVI : AV : S-Video Description Use to select PC, BNC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is 'SOURCE' button. The PIP turns off when the monitor is switched to an external source.
Video signal. (Off/On) More than one PIP couldn't be overlapped on screen as BNC and the component use the same terminal. 1) PIP - The direct button on the remote control is 'PIP' button. Off On : Turn the PIP Screen on or off. 2) Source - The direct button on the remote control is 'SOURCE' button. PC / DVI : AV / S-Video / Component Mode BNC : AV / S-Video Mode AV / S-Video : PC / BNC / DVI Mode Component : PC / DVI Mode : Select the input source for the PIP.
Available Mode OSD : PC / BNC / DVI : AV : S-Video : Component Description MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet,Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBright™ control button.
3) Blue If you adjust picture using Color Control function, Color Tone will turn to Custom mode. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1) Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area.
Available Mode OSD : PC / BNC / DVI : AV : S-Video Description Mode The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture settings. - The direct button on the remote control is 'P.MODE' button.
clearer and crisper images. Off On Film Mode You can turn Film Mode Off/On. The Film Mode feature offers you a theater-quality viewing experience. Off DNIe Demo - Digital Natural Image engine Samsung's new technology brings you more detailed images with contrast and white enhancement and 3D noise reduction. A New image compensation algorithm gives brighter, clearer images to our customers. DNIe technology will match every signal to your eyes. On You can compare a screen with DNle to that without DNle.
OSD Description Mode The Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos or concerts. 3) Movie : Choose Movie when viewing movies. 4) Speech : Choose Speech when watching a show that is mostly dialogue (i.e., news). 5) Custom : Choose Custom if you want to adjust the settings according to personal preference.
Available Mode OSD Time : PC / BNC / DVI : AV : S-Video : Component Description Use to choose one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer. 1) Clock Set : Current Time Setting. 2) Sleep Timer : Use to set the Monitor to turn off automatically in certain minutes. (Off, 30, 60, 90, 120, 150, 180) 3) On Timer : Use to set the Monitor to turn on automatically at a preset time. Use to control the mode, volume level at the time the monitor turns on automatically.
Video Wall A video wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 1) Video Wall : Turns Off/On the Video Wall function of the selected display. Off On 2) Format : The format can be selected to see a divided screen. Full Provides a full screen without any margins. Natural Displays a natural image with the original aspect ratio intact. 3) Screen Divider : The screen can be divided into.
3) Second : Determines the time period to run the Screen Scroll operation. (1~5 Seconds) By default, the time is set to 5 seconds. 1~5 Seconds Multi Control Available Mode OSD Multi Control : PC / BNC / DVI : AV : S-Video Description Assigns individual ID to the SET. 1) ID Setup : Assigning distinctive IDs to the SET. 2) ID Input : Use to select the transmitter functions of the individual SET. Only the SET whose ID corresponds to the transmitter setting becomes activated.
Available Mode OSD : PC / BNC / DVI : AV : S-Video Description MDC Move to the Multi Control OSD screen. LOCK Set the Safety Lock function. 1) Lock On : It will be locked on. 2) Lock Off : It wil be locked off. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. The preset password on the monitor is "0000".
Self-Test Feature Check Check the following items yourself before calling for service. Contact the Service Center for problems that you cannot solve by yourself. Self-Test Feature Check | Not Optimum Mode | Maintenance and Cleaning | Symptoms & Recommended Actions 1. Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer.
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are supported by the monitor. 3. Maintenance and Cleaning 1. Maintaining the Monitor Case. Clean with a soft cloth after disconnecting the power cord. z z Do not use benzene, thinner or other flammable substances, or a wet cloth. We recommend a Samsung cleansing agent is used to prevent damage to the screen. 2. Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.
Problems Solutions Screen is blank and power indicator is off z Ensure that the power cord is firmly connected and the LCD monitor is on. (Refer to the Connecting the Monitor) "Check Signal Cable" message z Ensure that the signal cable is firmly connected to the PC or video sources. (Refer to the Connecting the Monitor) Ensure that the PC or video sources are turned on. z "Not Optimum Mode " message z z Check the maximum resolution and the frequency of the video adapter.
card or software program. Sound is too high pitched or too low pitched z Adjust the Treble and Bass to appropriate level. 4. Problems related to Remote Control Problems related to the remote control and their solutions are listed. Problems Items to check The remote control buttons do not respond. z z z z z Check the battery polarities (+/-). Check if the batteries have been exhausted. Check if the power is on. Check if the power cord is securely connected.
General General Model Name SyncMaster 320P LCD Panel Size 32" Diagonal Display area 697.685mm (H) x 392.256mm (V) Pixel Pitch 0.511mm (H) x 0.511mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16.7M Colors Colors Resolution Optimum resolution 1360 x 768 / 1366 x 768 @ 60Hz depends on graphics card used Maximum resolution 1366 x 768 @ 60Hz Input Signal, Terminated RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB. 0.
Power Consumption Less than 180W Power Saving Less than 5W Dimensions (WxHxD)/ Weight 780 X 482 X 107 mm / 30.1 X 19.0 X 4.6 inch / 16.1kg 780 X 530 X 223 mm / 30.1 X 20.9 X 8.8 inch (With Stand) - Option 982 X 482 X 107 mm / 38.7 X 19.0 X 4.2 inch (With Speaker) - Option 982 X 530 X 223 mm / 38.7 X 20.9 X 8.8 inch (With Speaker, With Stand) - Option VESA Mounting Interface 200mm x 200mm (for use with Specialty(Arm) Mounting hardware.
Option : SPEAKER L/R(8Ω, 10W) Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 640 x 480 35.000 66.667 30.
Service The address and phone number of the company can be changed without previous notice. AUSTRALIA : Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paulo, SP SAC : 0800 124 421 http://www.samsung.com.br/ CANADA : Samsung Electronics Canada Inc.
Ciencies, 55-65 (Poligono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 http://samsung.es/ FRANCE : SAMSUNG ELECTRONICS FRANCE Service Paris Nord 2 66 rue des Vanesses BP 50116 Villepinte 95950 Roissy CDG Cedex Tel : 08 25 08 65 65 Fax : 01 48 63 06 38 http://www.samsungservices.com/ GERMANY : TELEPLAN Rhein-Main GmbH Feldstr. 16 64331 Weiterstadt T. 06151/957-1306 F. 06151/957-1732 * EURO 0.12/Min http://www.samsung.
PERU : Servicio Integral Samsung Av.Argentina 1790 Lima1. Peru Tel: 51-1-336-8686 Fax: 51-1-336-8551 http://www.samsungperu.com/ PORTUGAL : SAMSUNG ELECTRONICA PORTUGUESA S.A. Rua Mário Dioniso, No2 - 1º Drt. 2795-140 LINDA-A-VELHA Tel. 214 148 114/100 Fax. 214 148 133/128 Free Line 800 220 120 http://www.samsung.pt/ SOUTH AFRICA : Samsung Electronics,5 Libertas Road, Somerset Office Park, Bryanston Ext 16. Po Box 70006, Bryanston,2021, South Africa Tel : 0027-11-549-1621 Fax : 0027-11-549-1629 http://www.
Terms Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Types of Sync Signals Separate This is a scheme of transmitting individual vertical sync signals to the monitor. Composite This is a scheme of combining vertical sync signals into one composite signal and transmitting it to the monitor.
{ Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. { For example, the number of TFT LCD sub pixels that is contained in this product are 3,133,440 3.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur.
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
