Service manual
Rev. 2.00
- 99 -
SRP-275
5-4-4 Cover middle assy
Part name Assembly procedure
Cover middle①
② PMO-roller paper/end
Label③ -logo-SAMSUNG
Label④ -logo-BIXOLON
Label⑤ -operation
Operation panel ass’y⑥
Screw⑦ -taptite (M3×6) -2ea.
Switch⑧ -cover open ass’y
(Sub-assembly C-1)
Screw⑨ -tapping (M2×5) -2ea.
⑩
Switch-paper near end-W ass’y
(Sub-assembly C-2)
⑪ Harness (Operation panel)
1. Insert PMO② -roller paper/end to Cover middle① .
2. Paste Label③ -logo-SAMSUNG on the front side of Cover ①
middle.
3. Paste Label④ -logo-BIXOLON on the back side of Cover ①
middle.
4. Tighten Operation panel ass⑥ ’y to ① Cover middle with two ⑦
Screw-taptite (M3×6).
5. Insert ⑪ Harness (Operation panel) in Operation panel ass’y⑥ .
6. Tighten Switch⑧ -cover open ass’y to Cover middle① with two
Screw⑨ -tapping (M2×5).
7. Insert ⑩
Switch-paper near end-W ass’y
to C① over middle.
8. Align the harness of Switch⑧ -cover open ass’y and ⑩
Switch-
paper near end-W ass’y
.
1
2
3
4
5
6
7
7
8
9
9
10
11