Service manual
Rev. 2.00
- 98 -
SRP-275
5-4-2 Switch-paper near end assy
Part name Assembly procedure
PCB① -Switch-paper near end
Switch② -micro (5.9gf)
③
Harness-Switch-paper near end
1. Insert Switch② -micro (5.9gf) to PCB① -Switch-paper near end.
2. Solder the land on PCB① -Switch-paper near end bottom side and
attach Harness③ -Switch-paper near end on the land.
<Check point>
After soldering, check the frozen lead and short.
1
2
3
5-4-3 Switch-paper end assy
Part name Assembly procedure
PCB① -Switch-paper end
Switch② -micro (2.9gf)
Harness③ -Switch-paper end
1. Insert Switch② -micro (2.9gf) to PCB① -Switch-paper end.
2. Solder the land on PCB① -Switch-paper end bottom side and
attach Harness③ -Switch-paper end on the land.
<Check point>
After soldering, check the frozen lead and short.
1
2
3