Service manual
Rev. 2.00
- 96 -
SRP-275
5-3-8 Main assy
Part name Assembly procedure
① AC timing belt ass’y
(Sub-assembly 5-3-1)
②
AC upper frame caulking ass’y
(Sub-assembly 5-3-2)
③ AC upper cutter guide ass’y
(Sub-assembly 5-3-3)
④ AC motor ass’y
(Sub-assembly 5-3-5)
⑤ Gear-AC worm wheel
⑥ Gear-AC gear pulley -2ea.
⑦ Shaft-AC-shaft guide -2ea.
⑧ Ring-e hole (ø3.0) -2ea.
⑨ Frame-AC lower
⑩ Screw-taptite -5ea.
⑪ Screw-tapping
⑫ Harness-AC
1. Attach ① AC timing belt ass’y to two ⑥ Gear-AC gear pulley
and then insert two ⑥ Gear-AC gear pulley to two Shaft-AC-
worm/pulley of ② AC upper frame caulking ass’y.
2. Insert ⑤ Gear-AC worm wheel to Shaft-AC-worm/pulley of ②
AC upper frame caulking ass’y.
3. Assemble ③ AC upper cutter guide ass’y to ① AC timing belt
ass’y and then insert two ⑦ Shaft-AC-shaft guide to ③ AC
upper cutter guide ass’y and four holes ② AC upper frame
caulking ass’y. And assemble two ⑧ Ring-e hole (ø3.0).
4. Tighten ④ AC motor ass’y to ② AC upper frame caulking ass’y
with ⑩ Screw-taptite and ⑪ Screw-tapping.
5. Tighten ⑨ Frame-AC lower to ② AC upper frame caulking
ass’y with four ⑩ Screw-taptite.
6. Insert ⑫
Harness-AC to the connector of ④ AC motor ass’y.
2
1
3
4
5
6
6
7
7
8
8
9
10
10
10
10
10
11
12