Service manual
Rev. 2.00
- 111 -
SRP-275
Part name Assembly procedure
Button open④
⑤ Cover rear
⑥ Screw-taptite (M3×6) -9ea
⑦ Cover front-A ass’y
(Sub-assembly F)
⑧ Label-logo-BIXOLON
⑨ Label-rating
4. Insert Button④ open to Cover rear⑤ and then tighten Cover ⑤
rear on Frame-rotator ass’y with two Screw⑥ -taptite (M3×6).
5. Assemble Cover front⑦ -A ass’y to Cover base.
(
The SRP-275C type uses
Cover front ass’y
instead of
⑦
Cover front-
A ass’y
.
)
6. Paste Label⑦ -logo-BIXOLON on the center of Cover front⑦ -A
ass’y.
7. Paste ⑨ Label-rating on Frame① -base.
3
4
5
5
6
7
8