Service manual
Rev. 2.00
- 110 -
SRP-275
5-5-5 Main-assembly D
Part name Assembly procedure
Frame① -base
Frame② -cover DIP
③ Serial interface ass’y
(Sub-assembly E)
1. Tighten Frame① -base on Bracket PCB ass’y with four Screw⑥ -
taptite (M3×6).
2. Tighten Frame② -cover DIP on Frame① -base with Screw⑥ -
taptite (M3×6).
3. Tighten Serial interface ass’y③ to PCB-main ass’y with two ⑥
Screw-taptite (M3×6).