SyncMaster 2232MW LCD Monitor User Manual
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.
Safety Instructions Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product.
Safety Instructions DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGARETTES AND ANY HEATING APPLIANCES NEAR TNE PRODUCT. • Otherwise, this may cause fire. Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the internal temperature. Put down the monitor carefully.
Safety Instructions Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened and soft fabric. Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off. Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10.
Safety Instructions If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and contact a Service Center. • Otherwise, this may result in electric shock or fire. Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center.
Safety Instructions When using a fixed screen for a long time, an afterimage or stain may occur. • If you are not using your product for a long period of time, put it into sleep mode or use a moving screen saver. Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight may be damaged. Keep the volume at a comfortable level when using the headphones. • Excessively loud volume level may damage hearing.
Safety Instructions When removing batteries from the remote control, ensure that the children do not swallow the batteries. Keep the batteries out of children's reach. • If the batteries are swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/- polarity position as indicated on the battery holder. • The incorrect polarity may cause a battery to break or leak and may cause fire, injury, or contamination (damage). Use only specified standard batteries.
Safety Instructions Be careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers may become caught. • Also, if you tilt the product too far, it may fall and cause personal injury. Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front part of the product is heavy, install the product on a level and stable surface.
Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
Introduction Others Remote Control Batteries (AAA X 2) Cleaning Cloth (Not available in all locations) Sold separately HDMI Cable DVI to HDMI Cable Earphones/Headphones RCA Cable (Video-Yellow, Audio-Red and White) TV Antenna Cable Component (PR, PB, Y) Cable (Coaxial Cable) RCA to stereo (for PC) cable S-VIDEO Cable 10
Introduction Your Monitor Front SOURCE Activates a highlighted menu item. Push the 'SOURCE', button to change the input signal source. Changing the source is only allowed for external devices connected to the product at the time. To switch Screen modes: [PC] → [DVI] → [TV] → [AV] → [S-Video] → [Component] → [HDMI] >> Click here to see an animation clip MENU Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu.
Introduction This will enable you to see the overall power status of the system. For more information, see the PowerSaver section. Speaker You can hear sound by connecting the soundcard of your PC to the monitor. Rear Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.
Introduction 1. PC : Connect the signal cable to the PC port on the back of your monitor. 2. DVI-D : Connect the DVI cable to the DVI-D port on the back of your monitor. 3. HDMI/PC/DVI-D AUDIO IN : Connect the HDMI/PC/DVI-D AUDIO IN terminal at the back of your monitor to your computer�Øs sound card. COMPONENT IN R - AUDIO - L Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ R - AUDIO - L] port of the product.
Introduction The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. S-VIDEO / VIDEO / R - AUDIO - L / 1. S-VIDEO / VIDEO: Input devices such as DVD, VCR or Camcorder are connected to the VIDEO or S-VIDEO terminal of the monitor using the Video or S-Video cable. 2.
Introduction 电源 频道按钮 -/-- 项目 静音 上下按钮 / 频道按钮 确认 显示 节目源 返回 频道 退出 图像效果 伴音效果 画面静止 放大 节目源 立体声切换 定时 画中画 自动 1. 电源 Turns the monitor On/Off. 2. 频道按钮 Selects TV channels in the TV mode.Used to change channels when PIP is selected and the PIP SOURCE is set to TV. 3. -/-- (One/Two-Digit channel selection) Use to select a channel numbered ten or over. Press this button, and the "--" symbol is displayed. Enter the two-digit channel number. 4. 5. 6. Adjusts the audio volume.
Introduction 上下按钮/频道 7. 按钮 8. 9. 10. 确认 显示 节目源 11. 返回 12. 13. 频道 退出 14. 图像效果 Moves from one menu item to another horizontally, vertically or adjusts selected menu values. Activates a highlighted menu item. Current picture information is displayed on the upper left corner of the screen. Press the button to change the input signal SOURCE.Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time.
Introduction - Component / HDMI : Wide / 16:9 / Zoom1 / Zoom2 / 4:3 18. 节目源 - Adjustable when the PIP function is ON. Selects the Video SOURCE. 19. 立体声切换 STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on broadcasting type by using DUAL button on the remote control while watching TV. 20. 定时 Turns the monitor off after a pre-determined period of time. 21. 画中画 - Available in PC/ DVI Mode Push the "画中画" button to turn PIP screen On/Off. 22.
Connections Connecting the monitor 1. Connecting to a Computer Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the [PC] port on the back of your monitor. [PC] Using the DVI (Digital) connector on the video card.
Connections 2. Connecting to a Macintosh 1. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the D-SUB port on the back of your monitor. [PC] 2.Turn on the monitor and Macintosh. Connecting to Other devices Note This monitor allows the user to connect it to such input devices as a DVD player, a VCR or camcorder, or a DTV or TV without disconnecting the PC. The configuration at the back of the monitor may vary from product to product.
Connections 3. Connect your headphones to the Headphone connection terminal. 4. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 5. Select AV or S-Video using the SOURCE . Connecting TV Note You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer. 1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor.
Connections 1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the monitor. 2. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [PR, PB,Y] input ports using a component video cable (PR, PB,Y). 3. Select Component using the SOURCE Connecting HDMI Note You cannot connect a PC to the HDMI IN terminal. 1. Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable. 2.
Connections Connecting Using a DVI to HDMI Cable 1. 2. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [HDMI/PC DVI AUDIO IN] terminal of the monitor. 3. Then, start the DVD with a DVD disc inserted. 4. Select "HDMI" using the 'SOURCE' button.
Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) 1.
Using the Software Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another.
Using the Software 5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab.
Using the Software 8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK". 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
Using the Software Microsoft® Windows® XP Operating System 1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
Using the Software 5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button. 6. Select "Don't search, I will..." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
Using the Software http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually. 10. Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install 1.
Using the Software 9. Choose your monitor model and click the "Next" button then click "Next" button. 10. Click the "Finish" button then the "Close" button. If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click the "Finish" button then the "Close" button. Microsoft® Windows® Millennium Operating System 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" icon. 3. Select the "Settings" tab and click "Advanced Properties" button. 4.
Using the Software 5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window. 10. You have finished setting up your monitor.
Using the Software How to delete the Natural Color software program Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select Natural Color from the list and then click the "Add/Delete" button.
Adjusting the Monitor Input Available Modes • PC / DVI • TV • AV • S-Video • Component • HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Source List Use to select PC, TV or other external input source connected to the Monitor.Use to select the screen of your choice. The direct button on the remote control is "节目源" button. 1. PC 2. DVI 3. TV 4.
Adjusting the Monitor 5. S-Video 6. Component 7. HDMI PIP When external AV devices such as VCRs or DVDs are connected to the monitor, PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off / On) 1. PIP : Turn the PIP Screen on or off. The direct button on the remote control is "画中画" button. • 2. Off / On Source : Select the input SOURCE for the PIP. The direct button on the remote control is "节目源" button.
Adjusting the Monitor 3. Size : Change the Size of the PIP window. • / / If you select 4. in Size, Position will not be activated. Position : Change the Position of the PIP window.
Adjusting the Monitor Edit Name Name the input device connected to the input jacks to make your input source selection easier 1. PC 2. DVI 3. AV 4. S-Video 5. Component 6.
Adjusting the Monitor Picture Available Modes • PC / DVI • TV • AV • S-Video • Component • HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. PC / DVI Mode MagicBright MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching.
Adjusting the Monitor For working with a mixture of images such as texts and graphics. 3. Text Normal Brightness. For documentations or works involving heavy text. 4. Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. 5. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.
Adjusting the Monitor Colour Tone The tone of the colour can be changed. The individual colour DTVs are also user adjustable. 1. PC : Cool / Normal / Warm / Custom 2. DVI : Cool / Normal / Warm Colour Control Adjusts the individual R, G, B Colour Controls. 1. Red 2. Green 3.
Adjusting the Monitor ( Available in PC Mode Only. ) Note If you adjust picture by using Colour Control function, Colour Tone will turn to the Custom mode. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC Mode Only) 1. Coarse : Removes noise such as vertical stripes.
Adjusting the Monitor 3. Sharpness - When the SOURCE is set to DVI, only this function operates. : Adjusts the picture sharpness. 4. Position : Adjusts the screen location horizontally and vertically.
Adjusting the Monitor Auto Adjustment The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, auto function is performed.
Adjusting the Monitor Size You can switch the Size. 1. Wide 2. 4:3 PIP Picture You can adjust the PIP Screen Settings. 1. Contrast : Adjusts the Contrast of the PIP window on the screen. 2. Brightness : Adjusts the Brightness of the PIP window on the screen.
Adjusting the Monitor 3. Sharpness : Adjusts the Sharpness of the PIP window on the screen. 4. Colour : Adjusts the Colour of the PIP window on the screen. Available : PIP ON TV / AV / S-Video / Component / HDMI Mode Available Modes • PC / DVI • TV • AV • S-Video • Component • HDMI Note The default setting may be different depending on the selected Input Mode (input signal SOURCE selected in External Input List) and the selected resolution.
Adjusting the Monitor 1. Dynamic 2. Standard 3. Movie 4. Custom Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. 1. Contrast : Adjusts the contrast. 2. Brightness : Adjusts the brightness. 3. Sharpness : Adjusts the picture sharpness. 4. Colour : Adjusts the picture colour.
Adjusting the Monitor Colour Tone The tone of the colour can be changed. The individual colour components are also user adjustable. 1. Cool2 2. Cool1 3. Normal 4. Warm1 5. Warm2 Size You can switch the Size. The direct button on the remote control is "放大" button.
Adjusting the Monitor • TV / AV / S-Video mode : Auto Wide / Wide / 16:9 / Zoom1 / Zoom2 / 4:3 • Component / HDMI mode : Wide / 16:9 / Zoom1 / Zoom2 / 4:3 Sound Available Modes • PC / DVI • TV • AV • S-Video • Component • HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Mode The Monitor has a built-in high fidelity stereo amplifier. 1.
Adjusting the Monitor Choose Movie when viewing movies. 4. Speech Choose Speech when watching a show that is mostly dialogue (i.e., news). 5. Custom Choose Custom if you want to adjust the settings according to personal preference. Custom The sound settings can be adjusted to suit your personal preference. 1. Bass Emphasize low frequency audio. 2. Treble Emphasize high frequency audio. 3. Balance Allows you to adjust the sound balance between the left and right speakers.
Adjusting the Monitor Auto Volume Reduces the differences in volume level among broadcasters. • Off • On Sound Select You can select either Main or Sub when PIP is On. 1. Main 2.
Adjusting the Monitor Channel Available Modes • PC / DVI • TV • AV • S-Video • Component • HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Auto Store You can scan the frequency ranges available on your television in your area and store all the channels found automatically.
Adjusting the Monitor Manual Store You can scan the frequency ranges available on your television in your area and store all the channels found manually. 1. Programme : Inputting the appropriate program number on the screen. 2. Colour System : Adjusts repeatedly until the colour is of the best quality. (Auto <-> PAL <-> SECAM <-> NTSC4.43 <-> NTSC3.58 ) 3. Sound System : Adjusts repeatedly until the sound is of the best quality. (BG <-> DK <-> I <-> M) 4.
Adjusting the Monitor 2. Child Lock : Protects children from viewing inappropriate programs by blocking certain broadcast or video programs. The Child Lock feature can be selected only from the remote.
Adjusting the Monitor Sort It's used to exchange the numbers of two channels. Name If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required.
Adjusting the Monitor Fine Tune Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly. Setup Available Modes • PC / DVI • TV • AV • S-Video • Component • HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.
Adjusting the Monitor Language You can choose one of 2 languages. Note : The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Sleep Time Turns the monitor off after a pre-determined period of time. 1. Off 2.
Adjusting the Monitor 3. 60 4. 90 5. 120 6. 150 7. 180 The direct button on the remote control is the "定时" button. Transparency Changes the opaqueness of the background of the OSD. 1. High 2. Medium 3. Low 4.
Adjusting the Monitor Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue screen" mode to "Off". 1. Off 2. On Reset Picture parameters are replaced with the factory default values. 1. Image Reset 2.
Adjusting the Monitor HDMI Black Level When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level. 1. Normal 2.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Self-Test Feature Check │ Not Optimum Mode │ Display Adapter Driver │ Maintenance and Cleaning │ Symptoms and Recommended Actions 1.Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor.
Troubleshooting If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install the monitor driver. 1. Checking Adapter Driver Click Start -> Settings -> Control Panel -> Display -> Settings -> Advanced -> Adapter. If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly installed. Install the adapter driver again according to the information provided by the computer or video card manufacturers. 2.
Troubleshooting 1. Check if the power cord and the video cables are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, check if you installed the adapter (video) driver and the monitor driver. 4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.
Troubleshooting Q: Screen is blank and power indicator is off. A: Ensure that the power cord is firmly connected and the LCD monitor is on.(Refer to the Connecting the monitor) Q: "Check Signal Cable" message. A: Ensure that the signal cable is firmly connected to the PC or video SOURCEs.(Refer to the Connecting the monitor) Ensure that the PC or video SOURCEs are turned on. Q: "Not Optimum Mode" message. A: Check the maximum resolution and the frequency of the video adapter.
Troubleshooting A: If you see the "TEST GOOD" message on the screen when you press the MENU button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected. 3. Problems related to Audio Note Problems related to audio signals and their solutions are listed below. Q: No sound A: Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.
Troubleshooting Set the resolution in the Control Panel → Display → Settings. * Contact the video card manufacturer for details. Q: How can I set the Power Saving function? A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel → Display → Screen Saver.
Specifications General General Model Name SyncMaster 2232MW LCD Panel Size 22 inch (56 cm) Display area 473.76 mm (H) x 296.1 mm (V) Pixel Pitch 0.282(H) x 0.282(V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7M Resolution Optimum resolution 1680x1050@60Hz Maximum resolution 1680x1050@60Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0.7 Vp-p ± 5 % Separate H/V sync, Composite, SOG TTL level (V high ≥ 2.
Specifications Environmental considerations Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Specifications Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.
Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-LCD. • Resolution: 1680 x 1050 • Vertical frequency (refresh rate): 60 Hz TFT-LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one millionth) and above is used for this product.
Information What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention.
Information • Recommended settings: Bright colors with little difference in luminance • Change the characters color and background color every 30 minutes Ex) • Every 30 minutes, change the characters with movement. Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions.
Information Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II 71
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com Latin America ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.com 4004-0000 CHILE 800-SAMSUNG(726-7864) http://www.
Appendix Europe GERMANY 01805 - SAMSUNG (726-7864) http://www.samsung.com (€ 0,14/Min) HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 http://www.samsung.com/be NETHERLANDS 0900 SAMSUNG (726-7864) € http://www.samsung.com/nl (0,10/Min) NORWAY 815-56 480 http://www.samsung.com/no POLAND 0 801 801 881 http://www.samsung.com/pl 022-607-93-33 PORTUGAL 80820-SAMSUNG (726-7864) http://www.samsung.
Appendix Asia Pacific TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 http://www.samsung.com Middle East & Africa SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG(726-7864) http://www.samsung.com 8000-4726 Terms Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals.
Appendix curacy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen. Example: If the resolution is 1680(1920) x 1050(1200), this means the screen is composed of 1680(1920) horizontal dots (horizontal resolution) and 1050(1200) vertical lines (vertical resolution). RF Cable A round signal cable generally used for TV antennas.
Appendix English Caption (= Caption Setting) A kind of language selection feature that provides English subtitles (caption) or character information services from broadcasting services (ex: AFKN) or video tapes (marked CC), and which are especially useful for studying English. Multiplex Broadcasting This enables the user to enjoy the broadcasting service in both Korean and foreign (original) language as well as in stereo mode. A2 This system uses two carriers to transmit voice data.
Appendix istered trademarks of the U.S. Environmental Protection Agency (EPA).All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.
