Samsung Touchscreen Door Lock User Guide SHS-3320 Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage.
Com Touchscreen Door Lock | Table of Contents Introduction & Helpful Tips � ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Installation � ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Components & Tools � ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Door Preparation � ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Installing Lock � ��� ��� ��� ��� ��� ��� ���
mponents & Tools Touchscreen Door Lock Installation | Components & Tools Components ● Exterior Unit ● Interior Unit ● Screw Pack (4 types) ● Adjustable Deadbolt ● Interior Mounting Plate ● Strike (2-3/8˝~2-3/4˝, 60mm~70mm) ● Magnetic Sensor ● 4 AA Alkaline Batteries ● 4 User Cards or Key Fobs ● User Guide ● 3 Keys Parts Drawings Exterior Unit Adjustable Deadbolt Interior Unit Interior Mounting Plate Magnetic Sensor Strike Tools Door Preparation Lock Installation ● 2-1/8˝(54mm) hole saw ● 1
Touchscreen Door Lock | Door Preparation Step 1. Check the Door Status 1) This lock supports door thickness of 1-7/32˝ to 1-9/16˝ (31 to 40 mm). 2) Using the provided lock template, ensure that there are no obstructions that would prevent installing the lock properly. 3) Take note of which orientation the deadbolt will need to be installed, left hand or right hand. Left-handed Door Right-handed Door When viewed from the Outside, the hinge is on the left.
Touchscreen Door Lock Step 3. Drilling ① Drill a 2-1/8˝ (54 mm) diameter hole through the door, as indicated on the template, using a hole saw. ② Drill a 1-3/8˝ (35 mm) diameter hole through the door, as indicated on the template, using a hole saw. ③ Drill a 1˝ (25 mm) mortise hole using a hole saw. ④ Drill strike plate holes using a drill bit (1/8˝, 2.5 mm). ② 35mm ③ 25mm ① 54mm ④ 2.5mm Step 4.
Touchscreen Door Lock | Installing lock Inside Outside 3 2 7 6a Inside Unit Screws 4 5 6b 1 1. Installing the Deadbolt 2. Setting the Blade Deadbolt Screws Horizontal Blade RIGHT HANDED 3. Installing the Mounting Plate Vertical Blade LEFT HANDED 4. Connecting the Cable 3b Mounting Screws(3b, 3c) 3a Mounting Screws(3a) 3c 5.
Touchscreen Door Lock Procedures 1. Installing the Deadbolt 6. Fix screws for the Interior Unit. 1) Insert the deadbolt from the side of the door. 2) Fix the deadbolt using two FH+T4 x 25 screws. (T4x25/T4x15: for wooden door, U10-24x9: for steel door) 2. S etting the Blade (Ensure the Exterior Unit is aligned with the center hole of the deadbolt.) 1) Align the Interior Unit on to the Interior Mounting Plate, and check that the Thumbturn lever operates correctly.
Touchscreen Door Lock Programming | Basic Lock Operation Overview Opening the Door with a PIN Code → Touch the The touchscreen will illu- [Touchscreen]. minate. (If the Random Security function is enabled, press the 2 illuminated numbers.) Enter the PIN Code and press the [ ] button. The door opens within one second. Successful: Ding dong dang dong Failed: Ding dong ding dong Opening the Door with a Card → Touch the [Touchscreen]. Touch the Card reader with an Access Card.
Touchscreen Door Lock | Programming Features Outside Inside Touchscreen Registration Button Open/Close Button Card Reader Thumbturn Lever Magnetic Sensor Emergency Cylinder Battery Cover Restart Button External Power Contact Symbols Description Symbols Description Press the [ ] button. It is Touch the [Touchscreen]. used to complete number entry. Press the [Registration] button. It is used to change the PIN Code or set other Enter the Master PIN Code (4~12 digits).
Touchscreen Door Lock Symbols Description Symbols Description Enter the User PIN Code (4~12 Repeat the process inside digits). the rectangle. Touch the Card reader with the Press the [OPEN/CLOSE] User Card. button. Enter the User/Management Number. Can be set from 1 Sound Icon Display. to 70. Sound Indicators Sound Description Fur Elise Low voltage warning sound Tiritiritiriririri accompanied with [OPEN/CLOSE] button flashing red.
Touchscreen Door Lock | Definitions Double Authentication Mode : This mode requires both User Card and PIN Code to open the door, ensuring more security. However, Master PIN Code can open the door regardless of mode. To enable this mode, more than 1 User Card and PIN Code must be registered. This mode is disabled by default. Double-locking : Double-locking prevents the lock from being unlocked from the outside. You can enable it by using the [OPEN/CLOSE] button.
Touchscreen Door Lock Random Security Function : This mode prevents the disclosure of the PIN Code by entering the PIN Code after authenticating 2 arbitrarily selected numbers. When the buttons for 2 arbitrarily selected numbers are illuminated, pressing the 2 illuminated buttons illuminates the whole touchscreen. You can enable or disable the Random Security function. This function is enabled by default.
Touchscreen Door Lock | Programming User PIN Codes & User Cards Note: Pressing the [Registration] button is only available while the door is open. (Deadbolt must be unlocked.) Maximum number of user registration is 70. (User PIN Codes, User Cards, Key Fobs) Changing the Master PIN Code When the touchscreen is illuminat- Open the battery cover of the Interior Unit and press the ed, enter the current Master PIN Code (default is ‘1234’) and press [Registration] button briefly.
Touchscreen Door Lock Registering a User Card Open the battery cover of the Interior Unit and press the [Registration] button briefly. Ding dong When the touchscreen is illuminated, enter the current Master PIN Code (default is ‘1234’) and press the [ ] button. Successful: Ding dong Failed: Ding dong ding dong Touch the Card reader with the Card to register. Ding dong dang Enter a User Number (1~70) to register the User Card code and press the [ ] button.
Touchscreen Door Lock | Security Functions Setting the Out-of-Home Security Function When the door is closed [ ] of the touchscreen will light up. Press the [ Setting Double Locking Releasing Double Locking Press the [OPEN/ CLOSE] button for 5 seconds while the door is locked. ] button within 3 seconds. Ding dong dang Press the [OPEN/ CLOSE] button or turn the Thumbturn lever.
Touchscreen Door Lock Miscellaneous | Miscellaneous Information Reset to Factory Default Resetting the lock will delete all registered information. Note: After Reset, let the sensor detect the magnet to set the hand type again. All registered Master and user data will be deleted, and the lock will be reset to default settings.(Refer to the Program section on Page 12 for default values.) Press the [Registration] button for 10 seconds.
Touchscreen Door Lock | Troubleshooting When the lock doesn’t function correctly, please check the items below. If you can’t resolve the problem, please contact the nearest service center. Problem Resolution Reference ● Check if the batteries are inserted in the correct polarity. There is no power. ● Check that the batteries have a full charge. - ● Check that the Exterior Unit cable has not come loose. I can’t change the Master PIN Code. ● There was a delay while changing the PIN Code.
Touchscreen Door Lock My PIN Code or Card is authenticated, but the door won’t open. he lock may be malfunctioning. Please contact service T center. - ● Check if Auto Locking is set. When Manual Locking is set, touching the [Touchscreen] locks the door. The door won’t lock automatically when I close it. ● If the door doesn’t lock automatically when Auto Locking is set, then the lock has been installed incorrectly.
Touchscreen Door Lock | User Registration Table Management No. PIN CODE/CARD User Name Management No.
Touchscreen Door Lock | Product Specifications Item Voltage Emergency Power Source Specifications 4 AA Alkaline 1.5V Batteries (LR6) (6V) 9V Battery (6LF22) (not included) Operation Method Electronic Control Method (PIN Code entry or Card reading) Weight 1.8Kg (including both inside and Exterior Unit) Exterior Unit Product Dimensions Interior Unit 68.0 mm (W) x 180.0 mm (H) x 29.5 mm (D) 2.67 inch (W) x 7.08 inch (H) x 1.16 inch (D) 68.0 mm (W) x 180.0 mm (H) x 36.1 mm (D) 2.67 inch (W) x 7.
Touchscreen Door Lock LIMITED PRODUCT WARRANTY Installation of the product is considered acceptance of warranty conditions SEOUL COMMTECH CO., LTD (SEOUL COMMTECH) warrants its products to be free from manufacturing defects in materials and workmanship for 12 months from the date of purchase. SEOUL COMMTECH will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.
Touchscreen Door Lock Consequently, seller shall have no liability for any personal injury, property damage, or other loss based on a claim the product failed to give warning. Therefore, the installer should in turn advise the consumer to take any and all precautions for his or her safety including, but not limited to, fleeing the premises and calling police or fire department, in order to mitigate the possibilities of harm and/or damage.
Touchscreen Door Lock | Drilling Template Sheet : 2-3/8″(60mm) Backset 5/32" Deep Bore 1"DIA. Latch Hole.
Touchscreen Door Lock 24
Touchscreen Door Lock | Drilling Template Sheet : 2-3/4″(70mm) Backset 5/32" Deep Latch Hole. Bore 1"DIA.
Touchscreen Door Lock 26
Product information and customer service contact SEOUL COMMTECH SEOUL COMMTECH Co.,Ltd., reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2011, SEOUL COMMTECH Co.,Ltd. All right reserved. Reproduction in whole or in part without the express written permission of SEOUL COMMTECH is prohibited.