SAM-CRM-13a (Validator RF) Board H/W Specification 2016. 03. 07 Duali ______________________________ Project Manager ___________________________ Approved Revision Date Document Name A4 2016.03.07 SAM-CRM-13a H/W Spec.
Revision History Version Date Author Revision Date Document Name A4 2016.03.07 SAM-CRM-13a H/W Spec.
1 Overview SAM-CRM-13a is a high-end RF reader and it is the world first device which supports all three specification as following, (1) Conrtactless card spec_Mifare, ISO14443 Standard A/B, (2)Payment spec_Paywave, Paypass, JSMART, American Express and (3) EMVCo Type Approval Contact less Level 1 , NFC forum spec complaint. It also has 8(EA) of SIM slot for secure communication, RS-232(2ea) as interface method.
2 Summary ITEM Specification CPU Program Memory Description STM32F417ZGT6 (ARM Cortex_M4, 144pin) ST 1MBytes FLASH (default) On chip Up to 8Mbytes external Flash(Basically 4M Option Data Memory byte) (1M,2M,4M,8M) 192KBytes SRAM (default) On chip Up to 8Mbytes external SRAM(Basically 512K Option (1M,2M,4M,8M) byte) DISPLAY 4 Status LED Communication RS-232 * 2 Decide when order BUZZER Magnetic Buzzer RF CARD Frequency : 13.
3 Structure The Structure of equipment - SAM-CRM-13a itself contains all circuits include antenna, 8 SAM connectors. (RS-232) Host Controller Description of SAM-CRM-13a CPU: 32bit RISC ARM core CPU, It is stm32f417 which is ARM-based 32-bit MCU with Flash, This CPU has 1Mbyte Flash memory, 192Kbyte SRAM. PN512 RF IC: This RF IC can control RF card like MIFARE card, type A/B card, Felica, simultaneously. RS-232 Driver: It’s a Communication part for RS-232 communication.
operation is defined by each Payment specification. 4 Description of Surface The picture of device surface Blue - Ready Yellow - Process Green - Complete Red - Error RF Card zone Communication Cable Serial cable The size of terminal 135.5(W) * 152.7(L) * 29(H)mm LED configuration Revision Date Document Name A4 2016.03.07 SAM-CRM-13a H/W Spec.
5 Connector Pin Assignment RS-232 Connector and Cable Pin No Description 1 PWR_IN DC 12V 2 GND 3 TX1_RS232 For Host Controller 4 RX1_RX232 For Host Controller 5 GND 6 TX2_RS232 For slave 7 RX2_RX232 For slave 8 IO 9 RESET+ 10 RESET- Revision Date Document Name A4 2016.03.07 SAM-CRM-13a H/W Spec.
6 Description of Electricity The Description of power - Input power : 12V The using electric current - Normal 12V, 130mA under - MAX 12V, 300mA under The Description of Serial communication - 115200bps, 8 data, no parity, 1 stop bit 7 Description of Function Protocol Specification Refer to protocol specification for detail function. ( provide on request) Control Code Specification Refer to control code specification for detail function.
10 Certifications EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.