User's Manual

ManualsBrandsSamsung SDS ManualsElectronicsDigital door lock

『This manual was prepared for the certification test.』

 Product Specifications

Item 365Plus

Exterior Unit

58mm(W)×113mm(H)×16.8mm(D)

Interior Unit

70.4mm(W)×163.8mm(H)×38mm(D)

Size

Card

85.5mm(W)×54.0mm(H)×0.9mm(D)

Voltage

4 AA Alkaline 1.5V Batteries (LR6) (6V)

Emergency Power Source

9V Battery(6LF22) (Separately sold

)

Battery Life

10 Months (based on an average of 6 uses per day)

Support Card Standard

ISO14443A (Mifare®

), ISO 15693

 Exterior/Interior Parts

Touchscreen

Card Reader

External Power Port

Restart Button

Network Module Slot

[REG] Button

[SET] Button

[OPEN/CLOSE] Button

Magnetic Sensor

Thumbturn Lever

Summary of content (7 pages)

PAGE 1
『This manual was prepared for the certification test.』  Product Specifications Item Size 365Plus Exterior Unit 58mm(W)×113mm(H)×16.8mm(D) Interior Unit 70.4mm(W)×163.8mm(H)×38mm(D) Card 85.5mm(W)×54.0mm(H)×0.9mm(D) Voltage Emergency Power Source Battery Life Support Card Standard 4 AA Alkaline 1.
PAGE 2
“You could register the Master card and user PIN code/card after changing default Master PIN code and user PIN code.”  Basic Functions 1. Initialization 1.1 User Initialization All registered User data(user PIN Code/Card) will be deleted, and Super User PIN Code is set to ‘5678’. The Master data and Paring information aren’t delete. ① Press the [REG] button. ② Press the [*] button after pressing the [4] button. ③ Press the [*] button after pressing the [3] button.
PAGE 3
. Registering a Master Card You can register up to 9 Master Cards. ① Press the [REG] button. ② Press the [*] button after pressing the [1] button. ③ Press the [*] button after pressing the [1] button. ④ Enter the Master PIN Code, and press the [*] button. ⑤ Press the [*] button. Then ID Number is displayed. (242~250) ⑥ Place the Card on the Card Reader. ⑦ Press the [*] button for the addtional registration or press the [REG] button to quit. 4. Deleting a Master Card ① Press the [REG] button.
PAGE 4
6. Registering a User PIN Code/Card You can register up to 240 User Data(PIN Code/Card). ① Press the [REG] button. ② Press the [*] button after pressing the [2] button. ③ Press the [*] button after pressing the [1] button. ④ Enter the Super User PIN Code, and press the [*] button. ⑤ Press the [*] button. Then ID Number is displayed. (1~240) ⑥ Enter a new User PIN Code and press [*] button. Or place the Card on the Card Reader.
PAGE 5
② Press the [*] button after pressing the [3] button. ③ Press the [*] button after pressing the [2] button. 8.3 Unpair from a Home Controller After unpairing the door lock from a home controller, it will no longer be remotely-controlled via the home controller. And you couldn’t use User Card. ① Press the [REG] button. ② Press the [*] button after pressing the [3] button. ③ Press the [*] button after pressing the [3] button. 9. Opening the Door with a PIN Code/Card ① Touch the [Touchscreen].
PAGE 6
12. Lockout Mode When more than 5 failed authentication attempts with unregistered PIN Code/Cards occur, the alarm sound is generated, and the lock is deactivated for 3 minutes. 13. Intrusion Detection Function When the Interior Unit is forcibly detached while the door is locked, it is detected by the magnetic sensor, the alarm sounds. The Intrution Detection function is a basic function and cannot be disabled. 14. Addtional Function Mode \ SET Volume Setting Locking Mode Random 1 2 3 * * * Se
PAGE 7
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.