Clearing paper jams CLP-68xND Series/CLP-68xDW Series Click this link to open an animation about clearing a jam. When you print using the multi-purpose tray and the machine detects that there is either no paper or that the paper has been improperly loaded, follow the next steps to release the jammed paper. 4.
Clearing paper jams If you do not see the paper in this area, stop and go to next step: 1 2 3 4.
Clearing paper jams 4 Inside the machine Click this link to open an animation about clearing a jam. • The fuser area is hot. Take care when removing paper from the machine. • Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 17). 4.
Clearing paper jams 5 In exit area CLP-41xN Series/CLP-41xNW Series Click this link to open an animation about clearing a jam. The fuser area is hot. Take care when removing paper from the machine. 4.
Clearing paper jams If you do not see the paper in this area, stop and go to next step: 4.
Clearing paper jams CLP-68xND Series/CLP-68xDW Series Click this link to open an animation about clearing a jam. The fuser area is hot. Take care when removing paper from the machine. 4.
Clearing paper jams If you do not see the paper in this area, stop and go to next step: 4.
Clearing paper jams 6 In the duplex unit area (CLP-68xND Series/CLP-68xDW Series only) Click this link to open an animation about clearing a jam. 4.
Understanding the status LED The color of the LED indicates the machine's current status. • Some LEDs may not be available depending on model or country (see "Control panel overview" on page 19). • To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 96). • You also can resolve the error with the guideline from the computers’s Samsung Printing Status program window (see "Using Samsung Printer Status" on page 235).
Understanding the status LED LED ( Status ) WPSb ( ) Wireless Description Blinking The machine is connecting to a wireless network. On The machine is connected to a wireless networkG(see "Wireless network setup" on page 150). Blue The machine is disconnected from a wireless network. Off b ( ) Power Blue Eco Green On The machine is in power save mode. Off The machine is in ready mode or machine’s power is off. On Eco mode is on (see "Eco printing" on page 48). Off Eco mode is off. a.
Understanding display messages Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ and their meaning, and correct the problem, if necessary. • You can resolve the error with the guideline from the computers’s Printing Status program window (see "Using Samsung Printer Status" on page 235). • If a message is not in the table, reboot the power and try the printing job again.
Understanding display messages Message Paper Jam or empty in tray Meaning Suggested solutions • Paper has jammed in manual feeder. • Clear the jam (see "CLP-41xN Series/ CLP-41xNW Series" • There is no paper in tray. on page 85). • Load paper in tray (see "Multi-purpose (or Manual feeder ) tray" on page 35). Paper Jam bottom of duplex Paper has jammed during duplex printing. This is applicable only to machines with this feature.
Understanding display messages 8 Toner-related messages Message Replace Toner ź Message Install [color] toner cartridge Meaning Suggested solutions A toner cartridge is not Reinstall the toner cartridge. installed. A toner cartridge is not Reinstall the toner cartridge two or being detected three times to confirm it is seated properly. If the problem persists, contact the service representatives. Not remove protective Remove the protective film from the film from toner. toner cartridge.
Understanding display messages 10 Samsung does not recommend using a non-genuine Samsung toner cartridge such as refilled or remanufactured. Samsung cannot guarantee a non-genuine Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine warranty. Network-related messages Message Network Problem: Meaning Suggested solutions The IP address is used elsewhere.
Understanding display messages Message Meaning Fail to authenticate. 802.1x Network Error Suggested solutions Check the network authentication protocol. If the problem persists, contact your network administrator. Message Error [error number] Meaning Suggested solutions The machine unit cannot be controlled. Reboot the power and try the printing job again. If the problem persists, please call for service. The transfer belt is not installed. Install a Samsung-genuine transfer belt.
Understanding display messages Message Prepare new Transfer belt Replace new Transfer belt Replace Fuser Soon Replace new Meaning Suggested solutions The life of the transfer belt will expired soon. Replace the transfer belt with a new one. Contact the service representatives. The life of the transfer belt has expired. The life of the fuser unit will be expired soon. Replace the fuser unit with a new one. If the problem persists, please call for service.
5. Appendix This chapter provides product specifications and information concerning applicable regulations.
Specifications 1 General specifications The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information. Items Dimension Width x Length x Height Description • CLP-41xN Series/CLP-41xNW Series: 389 x 274 x 249 mm (15.31 x 10.79 x 9.80 inches) • CLP-68xND Series/CLP-68xDW Series: 389 x 274 x 249 mm (15.31 x 10.79 x 9.80 inches) Weight Machine with consumables • CLP-41xN Series/CLP-41xNW Series: 6.65 Kg (14.
Specifications Items Power consumption Wirelessc Description Average operating mode Less than 850 W Ready mode Less than 12 W Power save mode Less than 1.0 W Power off mode Less than 0.1 W Module SPW-B4319U a. Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing. b. See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine. c.
Specifications 2 Print media specifications Weight/Capacitya Type Plain paper b Size Letter Legal US Folio A4 Oficio JIS B5 ISO B5 Executive Statement A5 A6 CLP-41xN Series CLP-41xNW Series Tray1 Manual feeder Dimensions 216 x 279 mm (8.5 x 11 inches) 216 x 356 mm (8.5 x 14 inches) 216 x 330 mm (8.5 x 13 inches) 210 x 297 mm (8.27 x 11.69 inches) 216 x 343 mm (8.5 x 13.5 inches) 182 x 257 mm (7.17 x 10.12 inches) 176 x 250 mm (6.93 x 9.84 inches) 184 x 267 mm (7.25 x 10.5 inches) 140 x 216 mm (5.5 x 8.
Specifications Weight/Capacitya Type Envelope Thick paper b Size Envelope Monarch Envelope No. 10 Envelope No. 9 Envelope DL Envelope C5 Envelope C6 98 x 191 mm (3.87 x 7.5 inches) 105 x 241 mm (4.12 x 9.5 inches) 110 x 220 mm (4.33 x 8.66 inches) 162 x 229 mm (6.38 x 9.02 inches) 114 x 162 mm (4.49 x 6.
Specifications Weight/Capacitya Type Cotton, Color, Pre-printed Size Refer to the Plain paper section CLP-41xN Series CLP-41xNW Series Tray1 Manual feeder Dimensions Refer to the Plain paper section CLP-68xND Series CLP-68xDW Series Tray1/ Optional tray Multi-purpose tray 75 to 90 g/m2 (20 to 24 lbs bond) 75 to 90 g/m2 (20 to 24 lbs bond) 75 to 90 g/m2 (20 to 24 lbs bond) 75 to 90 g/m2 (20 to 24 lbs bond) • 250 sheets of 80 g/ • 1 sheet • 250 sheets of 80 g/m2 (21 lbs bond) • 50 sheets m2 (21 l
Specifications Weight/Capacitya Type Card stock b Bond paper Size Dimensions Letter, Legal, Refer to the Plain paper section US Folio, A4, JIS B5, ISO B5, Executive, A5 Refer to the Refer to the Plain paper section Plain paper section Archive, Punched paper, Letterhead Refer to the Plain paper section Refer to the Plain paper section Glossy Photo b Letter, A4, Postcard 4x6 Refer to the Plain paper section CLP-41xN Series CLP-41xNW Series Tray1 Manual feeder CLP-68xND Series CLP-68xDW Series Tray
Specifications Weight/Capacitya Type Size Minimum size (custom) Dimensions • Tray1: 98 x 127 mm (3.86 x 5 inches) CLP-41xN Series CLP-41xNW Series Tray1 Manual feeder 60 to 220 g/m2 ( 16 to 59 lb bond) 60 to 220 g/m2 ( 16 to 59 lb bond) • Optional tray: 148.5 x 210 mm (5.85 x 8.
Specifications Requirement (recommended) Operating system CPU RAM free HDD space Windows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.
Specifications Macintosh Requirements (Recommended) Operating system CPU Mac OS X 10.4 Mac OS X 10.5 RAM Free HDD space • Intel® processors • 128 MB for a powerPC based Mac (512 MB) • PowerPC G4/G5 • 512 MB for an Intel-based Mac (1 GB) • Intel® processors 512 MB (1 GB) 1 GB 1 GB • 867 MHz or faster Power PC G4/G5 Mac OS X 10.6 • Intel® processors 1 GB (2 GB) 1 GB Mac OS X 10.7 • Intel® processors 2 GB 4 GB 5.
Specifications Linux Items Operating system Requirements Redhat® Enterprise Linux WS 4, 5 (32/64 bit) Fedora 5 ~ 13 (32/64 bit) SuSE Linux 10.1 (32 bit) OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2 (32/64 bit) Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit) Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04 (32/64 bit) SuSE Linux Enterprise Desktop 10, 11 (32/64 bit) Debian 4.0, 5.0 (32/64 bit) CPU Pentium IV 2.
Specifications 4 Network environment Network and wireless models only (see "Features by models" on page 7). You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the machine. Items Network interface Specifications • Ethernet 10/100/1000 Base-TX Wired Lan Network operating system • 802.
Regulatory information Regulatory information This machine is designed for a normal work environment and certified with several regulatory statements. 5 Laser safety statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1 : 2007. Class I laser products are not considered to be hazardous.
When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 6 Ozone safety This product’s ozone emission rate is under 0.1 ppm. Because ozone is heavier than air, keep the product in a place with good ventilation. 7 Power saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.
Regulatory information 8 10 Recycling Recycle or dispose of the packaging material for this product in an environmentally responsible manner. Correct disposal of this product (Waste electrical & electronic equipment) (Applicable in the european union and other european countries with separate collection systems) 9 China only This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Regulatory information (The United States of America only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799 11 Taiwan only 12 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory information Canadian radio interference regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Regulatory information FCC Statement for Wireless LAN use: 16 Turkey only While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1m W/cm2 may be exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at all times. This device cannot be colocated with another transmitter and transmitting antenna.
Regulatory information 18 If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. Important warning: You must earth this machine.
Regulatory information EC Certification Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC.
Regulatory information No limitations at this time 19 Israel only The power output of the wireless device or devices that may be embedded in your printer is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use.
Regulatory information In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated.
Regulatory information 21 China only 5.
Copyright © 2012 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
User’s Guide CLP-47xN/CLP-47xNW Series CLP-68xND/CLP-68xDW Series ADVANCED ADVANCED This guide provides information about installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC This guide provides information concerning installation, basic operation and troubleshooting on windows.
ADVANCED 1. Software Installation Installation for Macintosh 130 Reinstallation for Macintosh 131 Installation for Linux 132 Reinstallation for Linux 133 2. Using a Network-Connected Machine Useful network programs 135 Wired network setup 136 Installing driver over the network 139 IPv6 configuration 147 Wireless network setup 150 Samsung MobilePrint 183 AirPrint 184 Layout 188 Paper 190 Graphic 191 System Setup 192 Emulation 195 Image Mgr.
ADVANCED Easy Eco Driver 227 Using SyncThru™ Web Service 228 Using Samsung Easy Printer Manager 232 Using Samsung Printer Status 235 Using the Linux Unified Driver Configurator 237 6.
1. Software Installation This chapter provides instructions for installing essential and helpful software for use in an environment where the machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see "Installing driver over the network" on page 139).
Installation for Macintosh 1 2 3 4 5 6 7 8 9 10 Make sure that the machine is connected to your computer and powered on. 14 Open the Applications folder > Utilities > Print Setup Utility. • Insert the supplied software CD into your CD-ROM drive. Double-click the CD-ROM icon that appears on your Macintosh desktop. 15 Click Add on the Printer List. • Double-click the MAC_Installer folder > Installer OS X icon. Click Continue. 16 Click Agree to agree to the license agreement. 17 For Mac OS X 10.
Reinstallation for Macintosh If the printer driver does not work properly, uninstall the driver and reinstall it. 1 Make sure that the machine is connected to your computer and powered on. 2 3 4 5 6 Insert the supplied software CD into your CD-ROM drive. Double-click the CD-ROM icon that appears on your Macintosh desktop. Double-click the MAC_Installer folder > Uninstaller OS X icon. Enter the password and click OK. When the uninstall is done, click OK.
Installation for Linux You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads). 1 The installation program added the Unified Driver Configurator desktop icon and the Unified Driver group to the system menu for your convenience.
Reinstallation for Linux If the printer driver does not work properly, uninstall the driver and reinstall it. 1 Make sure that the machine is connected to your computer and powered on. 2 When the Administrator Login window appears, type “root” in the Login field and enter the system password. You must log in as a super user (root) to uninstall the printer driver. If you are not a super user, ask your system administrator. 3 Click the icon at the bottom of the desktop.
2. Using a NetworkConnected Machine This chapter gives you step-by-step instructions for setting up a network connected machine and software. • Useful network programs 135 • Wired network setup 136 • Installing driver over the network 139 • IPv6 configuration 147 • Wireless network setup 150 • Samsung MobilePrint 183 • AirPrint 184 Supported optional devices and features may differ according to your model (see "Features by models" on page 7).
Useful network programs There are several programs available to setup the network settings easily in a network environment. For the network administrator especially, managing several machines on the network is possible. • Before using the programs below, set the IP address first. • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7). 2 SyncThru™ Web Admin Service Web-based machine management solution for network administrators.
Wired network setup 4 Printing a network configuration report You can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network. Press the (Menu) button on the control panel and select Network > Network Conf. First, you have to set up an IP address for network printing and managements.
Wired network setup 7 Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. IPv4 configuration using SetIP (Macintosh) Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. The following instructions may vary from your model.
Wired network setup Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 136) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 6 7 Select Apply, then OK, and OK again. Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 136) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
Installing driver over the network • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7). 3 Select Install Now. • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 18). • Selecting Custom Installation allows you to choose which programs to install. When the installation window appears, select Custom Installation.
Installing driver over the network If your machine is not found on the network or locally, an error message appears. Select the option you want and click Next. 5 Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. The searched machines will be shown on the screen. Select the one you wish to use and click OK.
Installing driver over the network Command- line /a”” or /A”” Definition Specifies destination path for installation. The destination path should be a fully qualified path. /i”