Multiple Display Control (MDC) 11. Troubleshooting 1. The display you wish to control does not appear on the Power Control Info Grid - Check the connection of RS232C. (Check if it is properly connected to the Com1 port) - Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict. - Check if the Display Set ID is a number between 1 and 10.
User control buttons The control button configuration may vary slightly depending on the monitor model. Monitor Buttons | Remote Control Buttons | Monitor Buttons | For more information about screen adjustment, refer to On-Screen Display. 1. Auto button Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted automatically. To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on.
User control buttons | Remote Control Buttons | For more information on the screen adjustment functions, refer to On-Screen Display. 1. Power button 2. Auto button 3. Mute button 4. VOL(Volume)and Up/Down buttons 5. Source button 6. Number buttons 7. PIP button 8. PIP Size button 9. P.Size button 10. Still button 11. Display button 12. Sleep button 13. Menu button 14. Exit button 15. Swap button 16. Location button 1. Power button Use this button to turn the monitor on and off. 2.
User control buttons 8. PIP Size button Press to make the PIP window PIP 1, PIP 2, Double Screen 1, Double Screen 2. 9. P.Size button Press to change the Screen size. 10. Still button Press the button once to freeze the screen. Press it again to unfreeze. 11. Display button Displays the resolution, frequency and input signal settings in the center of the screen. 12. Sleep button Automatically shuts off the unit at a preset time. 13.
OSD Functions Characters and icons become highlighted in blue during adjustment for each menu. PC Control | Video Control | Audio Control | Function Control 1. PC Control For detailed information on Screen Adjustment in the PC mode, refer to PC mode Screen Adjustment Animation Clips. Brightness Adjust Brightness. Contrast Adjust Contrast. Color Temperature The tone of color can be changed. The individual color components are also user customizable. 1) Mode 1 : High Temperature.
OSD Functions 2. Video Control For detailed information on Screen Adjustment in the Video mode, refer to Video mode Screen Adjustment Animation Clips. You can use this function only if your screen mode is Video 1 or Video 2 or Component. Brightness Adjust Brightness. Contrast Adjusting Contrast. Sharpness Use to adjust the difference between the lightest and darkest areas on the display. Color Use to adjust the lightness/darkness on the display. Tint Use to add the natural tone to the display.
OSD Functions 3. Audio Control For detailed information on Screen Adjustment in the Audio mode, refer to Audio mode Screen Adjustment Animation Clips. Sound Select is available when the PIP is on. Bass Emphasize low frequency audio. Treble Emphasize high frequency audio. Balance Sound balance ==> Allows you to adjust the sound balance between the left and the right speakers. (The ideal setting is 50 for the left speaker and 50 for the right speaker.
OSD Functions 4. Function Control For detailed information on Screen Adjustment in the Function mode, refer to Function mode Screen Adjustment Animation Clips. ID (MDC Program) Assigns individual ID to the SET. 1) ID Setup : Assigning distinctive IDs to the SET. 2) ID Input : Use to select the transmitter functions of the individual SET. Only the SET whose ID corresponds to the transmitter setting becomes activated.
OSD Functions 4. Function Control For detailed information on Screen Adjustment in the Function mode, refer to Function mode Screen Adjustment Animation Clips. Timer • Clock : Current Time Setting • On Time : Use to set the monitor to turn on automatically at preset time. • Off Time : Use to set the monitor to turn off automatically at preset time. • On Time Source : Use to control the mode at the time the monitor turns on automatically.
Check before calling for service Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Self-Test Feature Check | Video mode not supported | Down Scaling | Maintenance and Cleaning | Symptoms & Recommended Actions 1. Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2.
Check before calling for service 3. Down Scaling SXGA, 1280 X 1024 @ 60Hz~75Hz UXGA, 1600 X 1200 @ 60Hz~75Hz When the resolution is set to any of the above 2 unsupported modes, the ¡°Not optimum mode¡± message is displayed on the screen for 3 seconds . If this message is diaplayed, the monitor screen is not in its optimum status and the Auto Adjustment function may not work as normal. See the Preset Timing mode to set to the optimum resolution.
Problems and Solutions The following table lists possible problems and their solutions. Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer. 1. Problems related to Installation Problems related to the monitor installation and their solutions are listed. Problems The monitor screen flickers.
Problems and Solutions 3. Problems related to Audio Problems related to audio signals and their solutions are listed below. Problems No sound Solutions z z Sound level is too low. z z Sound is too high pitched or too low pitched z Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. (Refer to the Connecting Your Monitor) Check the volume level. Check the volume level.
Q&A Frequently asked questions are summarized here for your reference. Question How can I change the frequency? Answer Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows XP: Reset resolution by clicking Control Panel Theme Display Settings. Windows ME/2000: Set the resolution at the Control Panel Settings.
SyncMaster 403T General Specifications Design and specifications are subject to change without prior notice. General Model Name SyncMaster 403T LCD Panel Size 40.02 inch (Diagonal) Display area 871.68 (H) x 523.008 (V) Pixel Pitch 0.681 (H) x 0.681 (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16,777,216 Colors Resolution Optimum resolution 1280 x 768 @ 60Hz Maximum resolution 1280 x 768 @ 60Hz Input Signal Sync.
General Specifications Audio Input 2 RCA Jack Red(R) White(L), 0.5Vrms (-9dB) PC Audio Input 3.5ØStereo Jack, 0.5Vrms (-9dB) Frequency RF: 80Hz ~ 15kHz (at -3dB) Response A/V: 80Hz ~ 20kHz (at -3dB) Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings.
SyncMaster 323T General Specifications Design and specifications are subject to change without prior notice. General Model Name SyncMaster 323T LCD Panel Size 32.0 inch (Diagonal) Display area 687.36 (H) x 412.42 (V) Pixel Pitch 0.537 (H) x 0.537 (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16,777,216 Colors Resolution Optimum resolution 1280 x 768 @ 60Hz Maximum resolution 1280 x 768 @ 60Hz Input Signal Sync.
General Specifications Audio Characteristics Audio Input 1 RCA Jack Red(R) White(L), 0.5Vrms (-9dB) Audio Input 2 RCA Jack Red(R) White(L), 0.5Vrms (-9dB) PC Audio Input 3.5ØStereo Jack, 0.5Vrms (-9dB) Frequency RF: 80Hz ~ 15kHz (at -3dB) Response A/V: 80Hz ~ 20kHz (at -3dB) Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings.
PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
SyncMaster 403T Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 640 x 480 35.000 66.700 30.
SyncMaster 323T Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.
Service Center U.S.A. : Samsung Computer Products Customer Service 400 Valley Road, Suite 201, Mt. Arlington, NJ 07856 Tel. : (973)601-6000, 1-800-SAMSUNG (1-800-726-7864) Fax. : (973)601-6001 http://www.samsungusa.com/monitor/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paulo, SP SAC : 0800 124 421 http://www.samsung.com.br/ CANADA : Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 Tel.
Service Center NETHERLANDS/BELGIUM/LUXEMBOURG : Samsung Electronics Benelux B. V. Fleminglaan 12 2289 CP Rijiswijk, NEDERLANDS Service and informatielijn ; Belgium :0800-95214, http://www.samsung.be/ Netherlands : 0800-2295214, http://www.samsung.nl/ CHILE : SONDA S.A. Teatinos 550, Santiago Centro, Santiago, Chile Fono: 56-2-5605000 Fax: 56-2-5605353 56-2-800200211 http://www.sonda.com/ http://www.samsung.cl/ MEXICO : SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Saturno NO.44, Col.
Terms Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Types of Sync Signals Separate This is a scheme of transmitting individual vertical sync signals to the monitor. Composite This is a scheme of combining vertical sync signals into one composite signal and transmitting it to the monitor.
Regulatory FCC Information | IC Compliance Notice | MPR II Compliance | European Notice (Europe only) | PCT Notice | VCCI | FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Regulatory MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. European Notice (Europe only) Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Natural Color Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI).
For Better Display For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) in control panel of computer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. { { Resolution: 1280 x 768 Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is used for this product.
Authority Information in this document is subject to change without notice. © 2003 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.