EnG Speaker Components HT-TZ522 CENTER CENTER REAR L (AH81-04171G) (AH81-03853A) (AH81-03469A) R (AH81-03848J) CENTER (AH81-04171F) SCREW (Small): 6EA (AH81-03944A) ● connections (L) (R) (L) (R) SCREW (Large): 4EA (AH81-03943A) REAR REAR (AH81-03852A) (AH81-03465A) FRONT STAND L (AH81-04171E) R (AH81-03848H) (AH81-03846N) HOLE COVER CRADLE STAND/ WALL MOUNT SUBWOOFER (AH81-04171D) STAND BASE (AH81-03846P) HT-TZ525 (L) (R) (L) (R) FRONT REAR L (AH81-03846E) L (AH81-03846G) R (AH81-03846S) R (
connections How to Install the Speaker on the Stand (HT-TZ522/TZ525 only) 1. T urn the STAND upside-down and connect it to the STAND BASE. 1 2. Insert three small SCREWS into three holes marked with arrows using a screwdriver as shown in the illustration. STAND BASE STAND 3. Insert a large SCREW into the hole on the rear of the Speaker STAND. 4. Connect the assembled stand to the SPEAKER. 2 3 4 5.
EnG Connecting the Front, Center and Subwoofer Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. HT-Z520 Front Speaker (R) Black Red HT-TZ522/TZ525 Center Speaker Front Speaker (L) Center Speaker HDMI IN H AUDIO AUDIO Speaker Stand Subwoofer ● connections 3. Connect the connecting plugs to the back of the Home Theater.
connections Connecting the REAR SPEAKERS TO THE Wireless Receiving Amplifier Wireless Receiving Module (SWA-4100) HT-Z520/TZ522 HT-TZ525 Rear Speaker (L) Rear Speaker (R) HDMI IN AUDIO Rear Speaker (L) Rear Speaker (R) WIRELESS RECEIVER MODULE WIRELESS RECEIVER MODULE HT-Z520 Front Speaker (R) Center Speaker HT-TZ522/TZ525 Front Speaker (L) Center Speaker HDMI IN HDMI IN AUDIO AUDIO Subwoofer 24 Front Speaker (R) Subwoofer Front Speaker (L)
1. C onnect the front, center and Subwoofer speakers to the DVD Player, referring to page 21. HDMI IN AUDIO Slanted side face left ● connections 2. With the DVD Player turned off, insert the TX card into the TX Card Connection(Wireless) on the back of the main unit. • Hold the TX card so that the slanted side faces to the left and insert the card into the port. • The TX card enables communication between the main unit and the wireless receiver. 3.
connections Connecting the Video Out to your TV Choose one of the three methods for connecting to a TV. HDMI IN HDMI IN AUDIO METHOD3 (supplied) METHOD2 (not supplied) METHOD1 (not supplied) METHOD 1 : HDMI Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI IN jack on your TV.
EnG Connecting the HDMI IN/OUT HDMI (High-Definition Multimedia Interface) is an interface that enables the digital transmission of video and audio data with just a single cable. In addition, it enables you to enjoy multi-channel digital audio. HDMI IN ● connections HDMI Cable (not supplied) TV Set-Top/Cable box 1. Connect the HDMI IN jack of this unit and the HDMI OUT jack of a Set-Top/Cable Box. 2. Connect the HDMI OUT jack of this unit and the HDMI IN jack of your TV. 3.
connections HDMI Auto Detection Function The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. For possible HDMI resolutions. • HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
EnG BD Wise (only Samsung products) You can select to use the BD Wise menu only if the BD player is connected to a Samsung TV that supports BD Wise using the HDMI cable. MM `` If you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance. `` If you set off the BD Wise mode, the resolution of the connected TV will be adjusted to its maximum automatically. `` BD Wise will be disabled if the player is connected to a device that does not support BD Wise.