User Guide 1 Getting Started 2 Using the Computer 3 Settings and Upgrade 4 Backup/Restoration 5 Appendix Contents Start
Chapter 1 Getting Started Contents Chapter 1. Getting Started Chapter 3. Settings and Upgrade 3 4 7 22 25 30 66 68 69 71 74 75 78 83 Tips Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2.
Chapter 1.
Tips T A Tip The computer is not turning on or does not respond and displays a blank screen. Chapter Chapter1. 1 Getting Started T Restore the computer using Samsung Recovery Solution. 1. Turn the computer on and press the F4 key when the booting screen (SAMSUNG logo) appears. A 2. If the Internet Explorer setting again window appears, select Set again. 3. When the start menu screen appears, click Restore. A T A T A Restore Internet Explorer to its initial state. 1.
Chapter 1 Getting Started Before You Start Before reading the User Guide, first check the following information. t Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment.
Before You Start Copyright © 2011 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the consent of Samsung Electronics Co., Ltd. The information in this document is subject to change without notice due to improving the performance of the product. Samsung Electronics shall not be liable for any data loss.
Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may differ from actual products. Chapter 1 Getting Started 7 Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them. This may increase the internal temperature of the computer and may cause an injury.
Chapter 1 Getting Started Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. G 8 If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center. There is a danger of electric shock or fire hazard. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model.
Chapter 1 Getting Started Safety Precautions Warning 9 AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. If water or another substance enters the power input jack, AC adapter or the computer, disconnect the power cord and contact the service center.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1 Getting Started 11 Cutting the power to the internal battery (for corresponding models only.) Never heat the product(or battery) or put the product(or battery) into a fire. Do not put or use the product(or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire.
Chapter 1 Getting Started Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. t Thereafter, if you connect the AC adapter, the battery power will be supplied again. t Do not cut the battery power under normal conditions. t This may result in data loss or a product malfunction. The location of the Emergency Hole may differ depending on the model. 12 Usage Related Disconnect all cables connected to the computer before cleaning it.
Chapter 1 Getting Started Safety Precautions Warning 13 Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. If the computer is broken or dropped, disconnect the power cord and contact a service center for a safety check. If the notebook computer has an external type (removable) battery, separate the battery also. Using a broken computer may cause electric shock or fire hazard.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Security and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands.
Chapter 1 Getting Started Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. 15 Battery Usage Related Dispose of worn-out batteries properly. t There is a danger of fire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
Chapter 1 Getting Started Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. 16 Connect only permitted devices to the connectors or ports of the computer. Failure to do so, may cause electric shock and fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 17 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately.
Chapter 1 Getting Started Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. The device may be damaged or you may be injured. Security and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. t A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk.
Chapter 1 Getting Started Safety Precautions Using the power supply in an airplane Since the power outlet type differs depending on the type of airplane, connect the power appropriately. Since the representative figures of the power plug and the auto adapter are used, they may differ from the actual parts. 20 When using the AC power plug Connect the power plug pins perpendicular into the center of the power outlet.
Chapter 1 Getting Started Safety Precautions When using the auto adapter When the cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Auto Adapter DC Plug Cigar Plug In-flight Cigar Socket When using the Airplane Charging Converter Depending on the airplane, you have to use the auto adapter and charging converter.
Chapter 1 Getting Started Proper Posture During Computer Use 22 Maintaining a proper posture during computer use is very important to prevent physical harm. t Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. t Do not use the computer on your lap.
Chapter 1 Getting Started Proper Posture During Computer Use Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. t Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. t Avoid setting the monitor and LCD excessively bright. t Keep the monitor and LCD screen clean. t If you wear glasses, clean them before using the computer.
Chapter 1 Getting Started Proper Posture During Computer Use Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume first to listen to music. t 24 Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination Check your volume! t Check if the volume is too loud before using headphones. t It is not recommended using headphones for long periods of time.
Chapter 1 Getting Started Overview Front View t The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. t The actual color and appearance of the computer may differ from the pictures used in this guide. 1 Camera (Optional) Using this camera, you can take still pictures and record video.
Chapter 1 Getting Started Overview Status Indicators 26 On the contrary, if the ambient illumination becomes brighter, the LCD becomes brighter and the keyboard backlight is turned off. Press the + keys simultaneously, select the Easy Settings > Display, and select or unselect the check box to turn the illumination sensor ON/OFF. 2 HDD/ODD 1 Illumination 1 Sensor (Optional) 2 3 4 This sensor detects the ambient illumination of the PC.
Chapter 1 Getting Started Overview 27 Right View USB Port 1 (Optional) You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Plays CD or DVD titles. CD Drive (ODD) 2 (Optional) 1 2 Since an ODD(Optical Disk Drive) is optional, the installed drive depends on the computer model.
Chapter 1 Getting Started Overview Left View 1 2 3 4 5 6 7 1 Security Slot You can secure the computer by connecting a lock and cable to the Security Slot. 2 DC Jack A jack to connect the AC adapter that supplies power to the computer. Digital Video/Audio You can connect an HDMI cable to this 3 Port (HDMI) port. Using this port, you can enjoy (Optional) digital video and audio on the TV.
Chapter 1 Getting Started Overview Bottom View 1 Speaker 2 A device used to generate sound. Memory The main memory is installed inside the Compartment Cover cover. This hole is to cut the power supply to the battery. Insert and press one end of an unfolded paper clip into the hole it to cut the power to the battery. 1 2 3 29 3 Battery Emergency Hole For more information, refer to About the function to cut the power supply to the internal battery in the Safety Precautions.
Chapter 1 Getting Started Turning the Computer On and Off 30 Turning the computer on 1 2 3 Connect the AC adapter. Lift the LCD panel up. Press the Power button to turn the computer on. About Windows Activation When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the computer. Entering Sleep mode When the computer is turned on, press the computer’s power button once briefly.
Chapter 1 Getting Started Turning the Computer On and Off 31 ► For Windows XP Turning the computer off t Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. 1 Click the Start button on the taskbar. Click Turn Off Computer. t Save all your data before clicking on Shut down. t If Easy Settings is installed, the system shutdown location may differ.
Chapter 2.
Keyboard Shortcut key functions and procedures are discussed in the following sections. t The keyboard image may differ from the actual keyboard. t The keyboard may differ depending on your country. The following mainly describes the shortcut keys. Shortcut Keys You can use the following functions by pressing the keys below with the Fn key. ► A type model ► B type model Chapter 2.
Chapter 2. Using the computer Keyboard Fn Name Easy Settings 34 Function The Samsung software control program, the Easy Settings, is launched. Screen Brightness Control Controls the screen brightness. CRT/LCD Switches the screen output to the LCD or external monitor when an external monitor (or TV) is connected to the computer. Touchpad Turns the Touchpad function on or off. When using an external mouse only, you can turn the Touchpad off. Mute Press this button to turn the audio on or off.
Chapter 2. Using the computer Keyboard Other Function Keys (Optional) Eject the CD (DVD). + Delete 35 Keyboard Backlit Function (Optional) The keyboard Backlight are automatically turned on or off depending on the ambient illumination. Therefore, you can easily type with the keyboard when you are in a dark environment or at night. Performs the right-click mouse function (touchpad). + If you press the Fn Lock key, you can use hot keys even without pressing the Fn key.
Chapter 2. Using the computer Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. 36 Basic Touchpad Functions To use the touchpad, the touchpad driver is required. Moving the cursor on the screen A built-in Windows driver and a driver provided by the manufacturer are provided. For a better performance, using the driver provided by the touchpad manufacturer is recommended.
Chapter 2. Using the computer Touchpad 37 Click Function Right Button Function Place a finger on the touchpad and click on an item once. This corresponds to clicking the right mouse button. Alternatively, press the left button once quickly and release it. Press the right touchpad button once. The corresponding pop-up menu appears. Tap or Click Click Drag Function Double-Click Function Put your finger on the touchpad and quickly tap twice with your finger on an item you want.
Chapter 2. Using the computer Touchpad The Gesture Function of the Touchpad (Optional) 38 Configuring the Gesture Function Some gesture functions may not be configured. t The Touchpad Gesture function may not be provided and the version of the function may differ depending on the model. Some usage procedures may differ depending on the version. In this case, you can configure them using the following path. 1 t For detailed usage procedures, refer to the description in the Touchpad Settings window.
Chapter 2. Using the computer Touchpad 39 The Scroll Function Page Move Function This function is the same as the scroll area of the Touchpad. You can move to the previous or next page when you are looking at a photo or surfing the Internet. If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right accordingly.
Chapter 2. Using the computer Touchpad Setting the Touchpad Sensitivity If the touchpad reacts too sensitively or the pointer moves unintentionally, please adjust the touchpad pointer speed and sensitivity. 40 ► When using the Elan driver Click Start > Control Panel > Hardware and Sound > Mouse > ELAN > Options > PalmTracking and then adjust the sensitivity.
Chapter 2. Using the computer Touchpad 41 Touchpad On/Off Function Locking with shortcut keys Auto-locking when connecting USB mouse If you want to use the mouse only without using the touchpad, you can turn the touchpad off. ► When using the Elan driver To lock the touchpad function, press the + keys. You can set the touchpad and touchpad button settings in the tabs that appear when clicking Start > Control Panel > Hardware and Sound > Mouse.
Chapter 2. Using the computer CD Drive (ODD, Optional) An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalogue. t Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. 42 Inserting and Ejecting a CD 1 Insert the disc into the CD Drive so that the top of the disc faces upwards.
Chapter 2. Using the computer CD Drive (ODD, Optional) 2 To eject a disc, press the + Delete key combination. Alternatively, click Start > Computer > CD Drive, right-click over the CD Drive and then select Eject from the popup menu. Then the disc operation stops and the disc is ejected from the CD Drive. t The t The Delete key is optional. + Delete key combination works in the BIOS Setup, DOS, and Windows.
Chapter 2. Using the computer Multi Card Slot (Optional) Using the multi card slot, you can read and write data to cards. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc.. t Supported Cards : SD Card, SDHC Card, SDXC Card, MMC Card (The MMC Card may not be supported depending on your model.) t You have to additionally purchase a multi card with the necessary capacity depending on your requirements.
Chapter 2. Using the computer Multi Card Slot (Optional) 2 The card drive appears. Click Open folder and view files. If the window does not appear, click Start > Computer. 3 45 You can save, move and delete data by double-clicking the corresponding drive. You can only use the card after formatting it. The device name of the card drive may differ depending on your computer model. If a window asking to scan and change appears, click Continue Without Scanning. This will proceed to Step 2 above.
Multi Card Slot (Optional) To remove a memory card Chapter 2. Using the computer Take hold of the end of the card and remove the card. t To use a card to exchange data with a digital device such as a digital camera, formatting the data using the digital device is recommended. To format a memory card t When you try to use a card, which is formatted in the computer, in another digital device, you may have to format the card again in the device.
Chapter 2. Using the computer Connecting an External Display Device If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. 47 About the connection cable Users should additionally purchase the necessary connection cables. The computer provides an analog monitor port (RGB) and a digital video/audio port (HDMI).
Chapter 2. Using the computer Connecting an External Display Device 2 Connect the VGA cable (15-pin) to the connected VGA adapter and then connect the other end of the VGA cable to the VGA port of the monitor or the TV. External Monitor TV Projector n 48 LCD CRT LCD+CRT Clone VGA Adapter l LCD+CRT Dual View t If the screen is not switched even if you press the 3 Connect the power cord of the connected monitor, TV or projector and turn the power on.
Chapter 2. Using the computer Connecting an External Display Device Connecting through the HDMI port (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. 1 2 49 Press the + key combination once. Then the setting screen appears where you can select the monitor mode.
Chapter 2. Using the computer Connecting an External Display Device Setting up HDMI TV video (Optional) ► For Intel graphics cards If the Desktop screen displayed on the TV does not fit to the TV screen, configure it as follows depending on the graphics card. 1 Right-click over the Desktop and select Graphics Properties. If a window appears where you can select the mode, select Basic Mode and click OK.
Chapter 2. Using the computer Connecting an External Display Device Setting up HDMI TV audio (Optional) You can configure the sound of the computer to be played through the HDMI TV. 2 51 Change the setting to Digital Audio (HDMI), HDMI Device or Digital Output Device, click Set Default and click OK. You have to configure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the TV.
Connecting an External Display Device Using AMD Graphics Effectively (optional) PowerXpress is Switchable Graphics technology that selectively enables either the internal or external graphics chipset depending on the program to extend the battery life time while maintaining the graphics performance. Chapter 2. Using the computer 1 Right-click on the Desktop and select Configure Switchable Graphics from the popup menu. 2 Click the Browse button and register the software and click the Apply button.
Connecting an External Digital Device You can save a file stored on a device onto the computer by connecting a digital device such as a camera, camcorder or mobile phone to the computer and using the file management functions. 2 Chapter 2. Using the computer The Auto run window appears. Click Open folder and view files. If the window does not appear, click Start > Computer.
Chapter 2. Using the computer Adjusting the Volume You can adjust the volume using the keyboard and the volume control program. 54 Using the Sound Recorder The procedures to record sound using the Windows Recorder are described below. Adjusting the Volume using the Keyboard ► For Windows 7 + Alternatively, press the or + + key combination to turn the volume on or off. Adjusting the Volume using the Volume Adjustment Program 1 Connect a microphone to the microphone jack.
Chapter 2. Using the computer Adjusting the Volume ► For Windows XP 1 Connect a microphone to the microphone jack. 2 Click Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices. 3 Click Advanced from Volume and then, click Options > Properties. 4 Select Realtek HD Audio input from the mixer device to select Recording from Adjust Volume for. You can also use the internal MIC. 55 5 Select Mic Volume from Show the following volume controls and click OK.
Chapter 2. Using the computer Adjusting the Volume Using SoundAlive (Optional) The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. t SoundAlive is only supported in Windows 7. t The software programs provider may vary, depending on your computer model. t In addition, some pictures may differ from actual product depending on the computer model and software version.
Chapter 2. Using the computer Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. t Since these descriptions are written on the basis of the latest operating system, Windows 7, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions.
Chapter 2. Using the computer Wired Network 3 Select Local Area Connection and click the right button of the touch pad and select Properties. The LAN Device name may differ depending on your computer’s Network Device. 4 ► For Windows 7 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. ► For Windows XP Click General tab and select a LAN driver from Connect using:. Select Internet Protocol(TCP/IP) and click Properties.
Chapter 2. Using the computer Wired Network 5 Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. Using the WOL (Wake On LAN) function is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN).
Wired Network 3 Click Configure > Power Management tab. Select Allow this device to bring the computer out of standby, then click OK. Restart the system. - If the system wakes up from Sleep mode even though there is no received signal, use the system after disabling the function. - The LAN LED may not be turned off if System is shoutdown without disabling the WOL (Wake on LAN) option. - Connecting a wired LAN while using a wireless LAN may not activate the function.
Chapter 2. Using the computer Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. 61 t The screen figures and terms may differ depending on the model. t Depending on the program version, some functions may not be provided or different functions may be provided. t The descriptions below are for computer models with a Wireless LAN card or device.
Chapter 2. Using the computer Wireless Network (Optional) Connecting to a Wireless LAN through Windows 2 If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. ► For Windows 7 1 Click Connect. If a network key is set for the AP, enter the network key and then click Connect. For the network key, please ask your network administrator. If you click the Network Connections icon in the system tray, a list of available APs appears.
Chapter 2. Using the computer Wireless Network (Optional) ► For Windows XP 1 3 63 Once Connected to AP is displayed, you can use a wireless network. Click the Wireless Network Connection icon from the Taskbar using the right button of the touch pad. Then, click View Available Wireless Networks. Normal Wireless LAN Status If the wireless LAN icon is displayed in the system tray of the Taskbar, it indicates that the computer is connected to the Internet properly (see below).
Chapter 2. Using the computer Wireless Network (Optional) 64 When APs are found but your computer is not connected to the Internet Abnormal Wireless LAN Status When the wireless LAN is not connected If the wireless LAN icon is displayed with an “X” in the system tray of the Taskbar, it indicates that the wireless LAN device is turned off or that there are no available APs. Or the wireless LAN is disconnected. This is the case when an AP with a weak signal has been set to a high priority.
Chapter 3.
Chapter 3. Settings and Upgrade LCD Brightness Control You can adjust the LCD brightness in 8 levels. t Maintaining the changed LCD brightness even after turning the computer on again The screen brightness is automatically set to the brightest level when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time. Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the the + + key or key.
LCD Brightness Control t LCD bad pixels principle of computer Samsung observes the specifications regarding strict quality and reliability of LCD. But in spite of that, it is inevitable that there might be a small number of bad pixels. A large number of bad pixels can cause problems in appearance, but a small number of pixels doesn’t affect the computer performance.
Chapter 3. Settings and Upgrade Easy Settings (Optional) The Easy Settings is the integrated Samsung software control program that allows users to configure various settings. t This description is for models that support this function running on Windows 7. Functions General t The screen image and terminology may change depending on the model. t Depending on the program version, some functions may not be provided or different functions may be provided.
Chapter 3. Settings and Upgrade BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. t Use the BIOS setup to define a boot password, change the booting priority, or add a new device. t Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. 69 Entering the BIOS Setup 1 2 Turn the computer on. 3 After a moment, the BIOS setup screen appears.
Chapter 3. Settings and Upgrade BIOS Setup 70 System Setup Keys The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. In the Setup, you have to use the keyboard. F1 Setup Menu Help Help for the selected item appears automatically. Setup Items Setup Menu Description SysInfo This is a description about the basic specifications of the computer. Up & Down Keys F5/F6 Press to view the Setup Help. Press to move up and down.
Chapter 3. Settings and Upgrade Setting a Boot Password When setting a password, you have to enter a password to use the computer or enter the BIOS Setup. 71 2 In the Set Supervisor Password item, press . 3 Enter a password, press , re-enter the password for confirmation, and press again. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. t Do not lose or forget your password.
Setting a Boot Password Setting a User Password Chapter 3. Settings and Upgrade 72 Setting up a Hard Disk Drive Password (Optional) Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup. If you set a password for a hard disk drive, it cannot be accessed from another computer. Before configuring a user password, a supervisor password must have been configured.
Setting a Boot Password Deactivating the Password 1 Press on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press . 2 In the Enter Current Password item, enter the currently configured password and press . 3 Leave the Enter New Password item field empty, and press . 4 Leave the Confirm New Password field empty, and press . The password is deactivated.
Chapter 3. Settings and Upgrade Changing the Boot Priority By default, the highest boot priority device is set to the CD-ROM/ DVD drive. As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. 3 74 Press the down key (↓) to move to the SATA HDD item and press the F6 key to move up to the top item. Boot Menu [Boot Priority Order] The screen images and terms may differ from actual product depending on the computer model and driver version.
Chapter 3. Settings and Upgrade Upgrading Memory (Optional) These descriptions are for models with a memory compartment cover. For the replacement or upgrade procedures for the memory of models that do not have a memory compartment cover, please ask for assistance from your service center. There are 1 or 2 memory slots according to the model’s specification and users can replace the installed memory or add a new memory.
Chapter 3. Settings and Upgrade Upgrading Memory (Optional) 3 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver. 5 76 Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward.
Upgrading Memory (Optional) Removing a memory module Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees. Chapter 3.
Chapter 3. Settings and Upgrade Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer is equipped with an internal battery. Precautions t Users cannot remove or replace the internal battery. t To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service. t Use only chargers specified in the User Manual.
Chapter 3. Settings and Upgrade Battery Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge.
Chapter 3. Settings and Upgrade Battery 2 If the following screen appears, select one of the modes. Maximum Battery Mode 80 This mode is appropriate for the environment that requires maximum battery lifetime. The system performance may be degraded in this mode. t What is the Power-saving Effect? This product displays the battery life in each power mode. The higher the power saving effect increases, the longer the graph bar is displayed.
Chapter 3. Settings and Upgrade Battery 81 Extending the Battery Life (Optional) Using the Battery Calibration Function In the Easy Settings program, click General and set the Battery Life Extender to ON or OFF. When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. OFF This mode maintains 100% of the battery charge when using the computer on AC power.
Chapter 3. Settings and Upgrade Battery 3 Move to the Boot > Smart Battery Calibration item using the direction keys and press . 0WO.QEM 'PCDNG -G[RCF 6QWEJ2CF/QWUG =1HH? =$[ 0WO.QEM? ='PCDNGF? +PVGTPCN.#0 2:' 1241/ ='PCDNGF? =&KUCDNGF? 5OCTV $CVVGT[ %CNKDTCVKQP 4 Highlight Yes in the Battery Calibration Confirmation window and press . The Battery Calibration function is activated and the battery is forcefully discharged. To stop the operation, press the button.
Using the Security Slot You can secure the computer by connecting a lock and cable to the Security Slot. To use this feature, you have to purchase the lock and cable additionally. To use the lock and cable, refer to the product manual. Tie the lock and cable to a fixed object and install the other end of the cable to the security slot. Chapter 3.
Chapter 4.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) Samsung Recovery Solution is a program that enables restoring or backing up the hard disk drive for when a problem occurs with the computer. If the computer fails to boot up, you can restore the computer by pressing the key in the booting screen. 85 Samsung Recovery Solution Functions Backup/Restore Functions Backup Function Backs up drive C or required folders and files.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) System Software Functions 1 If you turn the power on for the first time, the Register Windows screen appears. If you register Windows according to the instructions on the screen, the computer will be restarted. 2 After the computer has been restarted, the Partition Setup screen appears.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) Restoring the computer 2 If the initial menu screen appears, click Restore. Restore is a function that enables restoring the computer to a saved point when the computer was purchased or a user-saved point. The Restore function provides the Basic Restore and Complete Restore options. 1 – When Windows is running: Click Samsung Recovery Solution.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) 3 Select either Basic Restore or Complete Restore from the Restore menu. 88 In the Advanced menu, you can change the size of the hard drive partitions (e.g. C: and D:). To restore the computer to the initial state, click Computer Initial State and perform the restoration process according to the instructions that appear on the screen.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) 89 Complete Backup/Restore A Complete Backup saves the complete image of the C drive onto another drive or DVD. A Complete Restore restores the image file saved by the Complete Backup onto the C drive. Complete Backup If you perform the Complete Backup function onto a DVD or removable storage device, you can restore your computer even when a problem occurs with the hard disk or when the restoration area is removed.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) 4 When the system restarts in Restoration Mode, the Complete Backup operation begins. Continue with the backup by following the instructions. t Samsung Recovery Solution supports the DVD+R, DVD-R, DVD+RW and DVD-RW formats. t If the LiveImaging option has been selected, the Complete Backup operation begins without the computer being restarted. 5 Continue with the Complete Backup operation by following the instructions.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) Complete Restore 1 91 3 Select a Complete Backup restoration point in the restoration point selection screen and click the Next button. The system is restarted. 4 The restoration progress message appears after the computer boots up in restoration mode. If you click OK, the restoration begins. – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) 92 Data Backup/Restore The Data Backup function enables you to backup specific files and folders to another drive, DVD or removable storage device. Data Restore enables you to restore data using the data saved by a Data Backup when data is lost. This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD.
Samsung Recovery Solution (Optional) Data Restore 1 – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive. – When backing up to a removable storage device Connect the removable storage device. – When backing up to another drive Proceed to Step 2. 2 When the initial menu screen appears, click Restore and then click Data Restore. 3 Select a backup item to be restored in the backup list and click the Next button.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) System Software Function The System Software function is a function that enables you to reinstall device drivers and System Software Programs or back up those programs. 94 Installing System Software 1 When the initial menu screen appears, click System Software > System Software Installation. 2 Move to the Easy Software Manager. The system software function is supported by Samsung Recovery Solution version 4 or later.
Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) System Software Backup 1 When the initial menu screen appears, click System Software > System Software Backup. 2 Specify the Save Path. 95 If you have specified a hard disk drive or a removable disk as the Save Path, the SamsungSoftware folder is created on the corresponding drive (e.g. D:\) and the system software programs are saved to that folder. Take care to not delete the folder.
Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 96 Recovery Solution Representation (Optional) What is a Recovery Area? t Samsung computers have an additional partition to recover computers or save backup files. (Only for models with the Samsung Recovery Solution.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs.
Chapter 5.
Chapter 5 Appendix Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. t If your computer has a voltage selector switch, make sure that the switch is in the proper position for your area.
Important Safety Information Care During Use t Do not walk on the power cord or allow anything to rest on it. t Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. t Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer.
Chapter 5 Appendix Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Chapter 5 Appendix Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. General Requirements The requirements listed below are applicable to all countries: t All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Chapter 5 Appendix Regulatory Compliance Statements t Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. t Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Chapter 5 Appendix Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. 104 Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules.
Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Chapter 5 Appendix Regulatory Compliance Statements FCC Part 68 (If fitted with a modem device.) This equipment compiles with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
Chapter 5 Appendix Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Chapter 5 Appendix Regulatory Compliance Statements When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands.
Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système. Afin de prévenir des interférences de radio au service autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et éloigné des fenêtres pour fournir une protection maximum.
Regulatory Compliance Statements To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Chapter 5 Appendix Regulatory Compliance Statements Brazil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Chapter 5 Appendix Regulatory Compliance Statements European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present.
Chapter 5 Appendix Regulatory Compliance Statements 113 Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Alulírott, Samsung nyilatkozom, hogy a Magyar Notebook PC megfelel a vonatkozó alapvetõ [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Chapter 5 Appendix Regulatory Compliance Statements Íslenska [Icelandic] Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Samsung erklærer herved at utstyret Notebook Norsk PC er i samsvar med de grunnleggende krav og [Norwegian] øvrige relevante krav i direktiv 1999/5/EF.
Chapter 5 Appendix Regulatory Compliance Statements The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: France General 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz.
Regulatory Compliance Statements European Telecommunication Information (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/ EC.
Chapter 5 Appendix WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) 117 Correct disposal of batteries in this product Pb (Applicable in the European Union and other European countries with separate collection systems) (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Product Specifications Chapter 5 Appendix 118 The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. CPU (Optional) Intel® Dual-Core™ i5/i7 Processor Intel® Quad-Core™ i7 Processor t Optional components may not be provided or different components may be provided depending on the computer model. Main Memory Memory type: DDR3 SODIMM t The system specifications are subject to change without notice.
Chapter 5 Appendix Product Specifications Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of the Intel Corporation. AMD, Dual-Core/Quad-Core are registered trademarks of the AMD Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation. All other product or company names mentioned herein are registered trademarks of their respective companies.
Chapter 5 Appendix Glossary 120 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators.
Chapter 5 Appendix Glossary 121 DVD (Digital Versatile Disk) Icon DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. This refers to a small image that represents a file that users can use.
Chapter 5 Appendix Glossary MMC (MultiMedia Card) card This is an external-type flash memory used for mobile devices such as mobile phones or digital cameras. Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network.
Chapter 5 Appendix Glossary 123 SDHC (Secure Digital High Capacity) card TCP/IPv4 This is the extension of the SD card that supports over 2GB bytes. This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. Server In general, a server refers to a computer that provides shared resources for network users. Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it.
Chapter 5 Appendix Index A AP M 61 B Memory 75 Monitor Connection / Output 47 Multi Card Slot 44 Status Indicators 26 Supervisor Password 71 T Touchpad Battery 78 BIOS Setup 69 O Booting Priority 74 Overview 25 72 P CD Drive 42 Password Charge 78 Product Specifications Click 37 71 118 D Recorder Double-Click 37 Drag 37 S Dual View 48 Safety Precautions L 66 V Volume Control 54 W R LCD Brightness 36 U User Password C 124 54 7 Samsung Recovery Solution
