User's Manual

ManualsBrandsSamsung Electro Mechanics ManualsElectronicsLTE Full Mini card Module

CEMF11G01G0101 User manual

REV 0.1

Samsung Electro-Mechanics Proprietary and Confidential

1/8

CEMF11G01G0101

User Manual

GCT GDM7240R1 LTE Solution

REV 0.1

Samsung Electro-Mechanics

2011-11-11

Summary

This description presents the general specifications of CEMF11G01G0101 which designed for

3GPP LTE Band 13.

The names of actual companies and products mentioned

herein may be the trademarks of their respective owners.

No part of this document may be reproduced, stored in a

retrieval system, or transmitted in any form or by any

means without the express written consent of Samsung

Electro-Mechanics.

This document is subject to change without notice.

Summary of content (8 pages)

PAGE 1
CEMF11G01G0101 User manual CEMF11G01G0101 User Manual GCT GDM7240R1 LTE Solution REV 0.1 Samsung Electro-Mechanics 2011-11-11 Summary This description presents the general specifications of CEMF11G01G0101 which designed for 3GPP LTE Band 13. © 2011 Samsung Electro-Mechanics. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners.
PAGE 2
CEMF11G01G0101 User Manual 1 Electrical Characteristics 1.1 Power Supply The CEMF11G01G0101 must be connected to a 3.3V power supply by PCI Express® Mini Card Electromechanical Specification Revision 1.2 Compliant. Requirement type Value Power Supply 3.3V Voltage range 3.1 ~ 3.6V Maximum Current (Max Power +23dBm) 850mA Table 1-1. Power Supply Requirements 1.2 General Characteristics Item LTE Remark Current consumption Typ.
PAGE 3
CEMF11G01G0101 User Manual 1.3 Storage Condition It needs proper condition for protecting the rust. REV 0.
PAGE 4
CEMF11G01G0101 User Manual 2 RF Specification 2.1 LTE Specification All measurements are made under nominal power supply and room temperature 25°C unless specified. Test Item Min Maximum Output Power Occupied Bandwidth +21.3 +19.3 Typ Max Unit +23 +25.7 dBm 10 MHz 0 Remark No MPR With MPR ΔfOOB : 15 ~ 85KHz -16.5 Tx -11.5 Spectrum Emission Mask -11.5 dB -30 -33 ACLR_UTRA Transmit Signal Quality Rx -36 17.5 ΔfOOB : 1.5 ~ 9.5MHz ΔfOOB : 10.5 ~ 14.5MHz -23.
PAGE 5
CEMF11G01G0101 User Manual 2.2 Antenna Connection 2 RF Port : U.FL Connector  Main ANT Connector : 1EA AUX ANT Connector : 1EA - Main ANT Connector is sharing the Tx and Rx. Figure 2-1. Antenna Connector Mechanical Dimension Attaching an antenna to the CEMF11G01G0101 :  Use a Hirose U.FL connector (Part No. : U.FL-R-SMT, CL No. : 331-0471-0-10) to attach an antenna to a connection point on the CEMF11G01G0101.  Match coaxial connections between the CEMF11G01G0101 and the antenna to 50 Ω.
PAGE 6
CEMF11G01G0101 User Manual 3 Label Information 3.1 Module Label The Label contains Model Name, Product Code, FCC ID, IMEI and Serial Number. Figure 3-1. Module Label Information 3.1.1 S/N(Serial Number) Ex) S N F B 000001     S N F B 000001      Company S: Samsung Custom Model N : CEMF11G01G0101 Year F:2011 G:2012 Month 1~9:Jan~SEP A:OCT, B:Nov, C:Dec Serial No 000001 ~ FFFFFF (HEX) Table 3-1. Serial Number Information REV 0.
PAGE 7
CEMF11G01G0101 User Manual 6 Safety Information 6.1 Certification FCC ID : E2XCEMF11G01G0101 Warning: Exposure to Radio Frequency Radiation The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
PAGE 8
CEMF11G01G0101 User Manual This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.