User manual S22E450F S22E650D S23E650D S23E650K S24E450F S24E650PL S24E650XL S24E650DW S24E650MW S24E650XW S27E650D S27E650X The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS 7 Copyright 7 Icons used in this manual 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols Electricity and Safety Installation and Safety Operation and Safety 18 Correct posture to use the product 19 Checking the Components 19 Checking the Components 21 Parts 21 23 Frontal Buttons (S22E450F / S24E450F) Frontal Buttons (S24E650PL / S24E650XL / S24E650XW / S27E650X) F
Table Of Contents CONNECTING AND USING A SOURCE DEVICE SCREEN SETUP 36 Installation 36 37 38 39 41 Attaching the Stand Adjusting the Product Tilt and Height Rotating the Monitor Installing a Wall-mount Kit or Desktop Stand Anti-theft Lock 42 Before Connecting 42 Pre-connection Checkpoints 43 Connecting and Using a PC 43 47 51 52 Connecting to a PC Connecting the Power Driver Installation Setting Optimum Resolution 53 Brightness 53 Configuring Brightness 54 Contrast 54 Configuring Contr
Table Of Contents CONFIGURING TINT RESIZING OR RELOCATING THE SCREEN 63 Image Size 63 Changing the Image Size 65 HDMI Black Level (S22E450F / S24E450F / S23E650K / S24E650PL) 65 Configuring the HDMI Black Level Settings 66 Response Time (Except S22E450F / S24E450F) 66 Configuring the Response Time 67 H-Position & V-Position 67 Configuring H-Position & V-Position 69 Coarse 69 Adjusting Coarse 70 Fine 70 Adjusting Fine 71 Red 71 Configuring Red 72 Green 72 Configuring Green
Table Of Contents SETUP AND RESET INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE 78 Display Time 78 Configuring Display Time 79 Transparency 79 Changing Transparency 80 Reset All 80 Initializing Settings (Reset All) 81 Smart Eco Saving 81 Configuring Smart Eco Saving 82 Off Timer Plus 82 84 Configuring Off Timer Configuring Eco Timer 86 PC/AV Mode 86 Configuring PC/AV Mode 88 Key Repeat Time 88 Configuring Key Repeat Time 89 Source Detection 89 Configuring Source Dete
Table Of Contents TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 95 Requirements Before Contacting Samsung Customer Service Center 95 95 95 Testing the Product Checking the Resolution and Frequency Check the following.
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space z Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. z Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. z The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. z ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. z The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable. z ! An electric shock or fire may result. Do not drop objects on the product or apply impact. z An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. z Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. z ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Looking at the screen too close for an extended period of time can deteriorate your eyesight. ! Do not hold the monitor upside-down or move it by holding the stand. z The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. z An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. z Eye fatigue will be relieved.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: z Straighten your back. z Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. z Adjust the angle so light does not reflect on the screen. z Keep your forearms perpendicular to your upper arms and level with the back of your hands. z Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Components 1.1.1 Checking the Components z Contact the dealer from whom you purchased the product if any item is missing. z The appearance of the components may differ from the images shown.
1 Preparations Stand base (Applicable to the stand models that have USB ports only.) Stand neck (optional) (optional) Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons (S22E450F / S24E450F) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE SAVER SOURCE AUTO MENU EYE SAVER SOURCE AUTO Icons Description z z MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Use this button to control the brightness, contrast and sharpness of the screen. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI/HDMI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only.
1 Preparations 1.2.2 Frontal Buttons (S24E650PL / S24E650XL / S24E650XW / S27E650X) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE EYE SAVER SAVER SOURCE SOURCE AUTO MENU EYE SAVER SOURCE AUTO Icons Description z z MENU Open or close the onscreen display (OSD) menu, or return to the parent menu.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (S24E650XL/S24E650XW/S27E650X: Analog/ DVI/DisplayPort, S24E650PL: Analog/HDMI/DisplayPort). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only.
1 Preparations 1.2.3 Frontal Buttons (S22E650D / S23E650D / S24E650DW / S27E650D) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE SAVER SOURCE AUTO MENU EYE SAVER SOURCE AUTO Icons Description z z MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI/DisplayPort). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only. Press the [AUTO] button to automatically adjust the screen settings.
1 Preparations 1.2.4 Frontal Buttons (S23E650K / S24E650MW) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE EYE SAVER SAVER SOURCE SOURCE AUTO MENU EYE SAVER SOURCE AUTO Icons Description z z MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (S23E650K: Analog/HDMI, S24E650MW: Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only.
1 Preparations 1.2.5 Reverse Side (S23E650K) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. HDMI IN HDMI IN RGB IN AUDIO IN/OUT HDMI IN RGB IN RGB IN AUDIO IN/OUT POWER IN POWER IN AUDIO IN/OUT POWER IN AUDIO IN/OUT HDMI IN RGB IN OUT OUT IN IN Port POWER IN Description Connect to a source device using an HDMI cable. Connect to a PC using the D-SUB cable.
1 Preparations 1.2.6 Reverse Side (S24E650MW) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DVI IN DVI IN RGB IN AUDIO IN/OUT DVI IN RGB IN RGB IN AUDIO IN/OUT POWER IN POWER IN AUDIO IN/OUT POWER IN OUT AUDIO IN/OUT DVI IN RGB IN IN POWER IN OUT IN Port Description Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
1 Preparations 1.2.7 Reverse Side (S22E450F / S24E450F) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. HDMI IN HDMI IN HDMI IN DVI IN DVI IN RGB IN RGB IN DVI IN RGB IN POWER IN POWER IN POWER IN HDMI IN Port DVI IN POWER IN RGB IN Description Connect to a source device using an HDMI cable. Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
1 Preparations 1.2.8 Reverse Side (S22E650D / S23E650D / S24E650DW / S27E650D) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN DP IN DP IN DVI IN DVI IN RGB IN RGB IN DVI IN RGB IN POWER IN POWER IN POWER IN Port DP IN DVI IN RGB IN POWER IN Description Connect to a PC using a DP cable. Connect to a PC using the DVI cable.
1 Preparations 1.2.9 Reverse Side (S24E650XL / S24E650XW / S27E650X) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN DP IN DP IN DVI IN DVI IN RGB IN RGB IN DVI IN RGB IN POWER IN AUDIO IN/OUT POWER IN AUDIO IN/OUT AUDIO IN/OUT POWER IN DP IN DVI IN RGB IN AUDIO IN/OUT OUT OUT IN IN Port POWER IN Description Connect to a PC using a DP cable. Connect to a PC using the DVI cable.
1 Preparations 1.2.10 Reverse Side (S24E650PL) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN DP IN DP IN HDMI IN HDMI IN RGB IN RGB IN HDMI IN RGB IN POWER IN AUDIO IN/OUT POWER IN AUDIO IN/OUT AUDIO IN/OUT POWER IN DP IN AUDIO IN/OUT HDMI IN RGB IN OUT OUT IN IN Port POWER IN Description Connect to a PC using a DP cable. Connect to a source device using an HDMI cable.
1 Preparations 1.2.11 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a USB device. Applicable to the stand models that have USB ports only.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Do not remove the fixing pin until Insert the stand base into the you are finished attaching the stand in the direction of the stand. arrow. Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base. After installing the stand, place the product upright.
1 Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 21.5"-24" 27" 4 SE450 21.5" (without a USB port) 21.5"- 27" (Except for SE450 21.5" without a USB port) 0 (± 5 mm) 100 mm (± 5 mm) z To adjust the height, remove the fixing pin. z The monitor tilt and height can be adjusted. z Hold the top center of the product and adjust the height carefully.
1 Preparations 1.3.3 Rotating the Monitor You can rotate your monitor as shown below. 1 2 3 4 5 6 z Be sure to fully extend the stand before rotating the monitor. z If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the floor and get damaged. z Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Unfasten the screw from the back of the product. Lift and detach the stand.
1 Preparations Notes z Using a screw longer than the standard length can damage the internal components of the product. z The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. z Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
1 Preparations 1.3.5 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. z Check the types of ports at the back of the product you want to connect.
2 2.2 Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC z Select a connection method suitable for your PC. z Connecting parts may differ in different products. z The exterior may differ depending on the product. Connection Using the D-SUB Cable (Analog Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
2 Connecting and Using a Source Device Connection Using the DVI Cable (Except S23E650K / S24E650PL) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DVI IN A B A B DVI IN DVI IN DVI IN 1 Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC. Connect A to the [DVI IN] port on the product, then connect B to the DVI port on the computer.
2 Connecting and Using a Source Device Connection Using the HDMI Cable (S22E450F / S23E650K / S24E450F / S24E650PL) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN I IN HDM 1 Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the PC. 2 Press [ ] to change the input source to HDMI.
2 Connecting and Using a Source Device Connection Using the DP Cable (S22E650D / S23E650D / S24E650XL / S24E650PL / S24E650XW / S24E650DW / S27E650X / S27E650D) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN DP IN 1 2 Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC. Press [ ] to change the input source to DisplayPort.
2 Connecting and Using a Source Device 2.2.2 Connecting the Power z z Connecting parts may differ in different products. z The exterior may differ depending on the product. To use the product, connect the power cable to a power outlet and the [POWER IN] port on the product. POWER IN The input voltage is switched automatically.
2 Connecting and Using a Source Device Connecting USB The [ z Applicable to the stand models that have USB ports only. z You can use a USB device such as a mouse, keyboard, memory stick or external hard disk drive (HDD) by connecting it directly to the [ ] port on the monitor. You do not need to connect it to the computer. An external mass-storage HDD requires an external power supply and be sure to connect it to a power source. ] USB port of the monitor supports High-Speed Certified USB 2.0.
2 Connecting and Using a Source Device 2 3 Use the USB cable to connect a USB device to the [ ] port on the monitor. The use procedures are as the same as those for using an external device connecting to the PC. z You can connect and use a keyboard and mouse. z You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.) z You can run, move, copy or delete the files on the storage device.
2 Connecting and Using a Source Device Changing the sound settings on Windows (S23E650K / S24E650XL / S24E650PL / S24E650MW / S24E650XW / S27E650X) Control Panel → Audio → Speaker → Speaker Setup 1 2 3 4 2 Connecting and Using a Source Device 50
2 Connecting and Using a Source Device 2.2.3 Driver Installation z You can set the optimum resolution and frequency for this product by installing the corresponding drivers. z An installation driver is contained on the CD supplied with the product. z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.2.4 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. 6HWXS *XLGH 7KH RSWLPDO UHVROXWLRQ IRU WKLV PRQLWRU LV DV IROORZV ****x**** **Hz 8VH WKH DERYH VHWWLQJV WR VHW WKH UHVROXWLRQ RQ \RXU 3& (QJOLVK 2.
3 Screen Setup A detailed description of each function is provided. Refer to your product for details. Configure the screen settings such as brightness. 3.1 Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z This menu is not available when Smart Eco Saving is set. z This menu is not available when Eye Saver Mode is enabled.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Game Mode is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.2.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. z This menu is not available when Game Mode is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.3.
3 3.4 Screen Setup Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation.
3 3.5 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. z This menu is not available when Eye Saver Mode or Smart Eco Saving is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.5.1 Configuring Game Mode 1 Press any button on the front of the product to display the Key Guide.
3 3.6 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. z This menu is not available when Smart Eco Saving is set. z This menu is not available when Game Mode is enabled. z This menu is not available when Eye Saver Mode is enabled. z SAMSUNG This menu is not available when MAGIC Angle is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 Screen Setup In AV mode (S22E450F / S24E450F / S23E650K / S24E650PL) PICTURE Brightness 100 Contrast 75 Sharpness Dynamic Eye Saver Mode Standard Game Mode Movie Custom SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale Set to an optimum picture quality suitable for the working environment. PICTURE 100 Brightness 75 Contrast Set to an optimum picture quality suitable for the working environment.
3 3.7 Screen Setup SAMSUNG MAGIC Angle (S22E450F / S24E450F) SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Game Mode or Eye Saver Mode is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 Screen Setup 4 5 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
3 3.8 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. z The function has more obvious effects on low-resolution pictures. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Game Mode is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.8.
3 3.9 Screen Setup Image Size Change the picture size. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.9.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
3 Screen Setup In AV mode PICTURE Image Size 4:3 Response Time 16:9 H-Position Screen Fit V-Position Choose the size and aspect ratio of the picture displayed on screen. 4:3 Response Time Wide H-Position Screen Fit 50 Coarse 2200 Fine Choose the size and aspect ratio of the picture displayed on screen. Image Size V-Position 50 Coarse PICTURE 2200 Fine 0 0 AUTO PICTURE Choose the size and aspect ratio of the picture displayed on screen.
3 Screen Setup 3.10 HDMI Black Level (S22E450F / S24E450F / S23E650K / S24E650PL) If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. z This function is only available in HDMI mode.
3 Screen Setup 3.11 Response Time (Except S22E450F / S24E450F) Accelerate the panel response rate to make video appear more vivid and natural. z It is best to set Response Time to Standard or Faster when you are not viewing a movie. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.11.1 Configuring the Response Time 1 Press any button on the front of the product to display the Key Guide.
3 Screen Setup 3.12 H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. z This menu is available in Analog mode. z This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select Screen Fit to adjust horizontal position in 0-6 levels. z The functions available on the monitor may vary depending on the model.
3 Screen Setup 4 5 Press [ ] to configure H-Position or V-Position. The selected option will be applied.
3 Screen Setup 3.13 Coarse Adjust the screen frequency. z This menu is available in Analog mode only. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.13.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product.
3 Screen Setup 3.14 Fine Fine-adjust the screen to obtain a vivid picture. z This menu is available in Analog mode only. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.14.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ ] on the product.
4 Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Color Tone and press [ ] on the product. ] on the product. The following screen will appear.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.
5 5.1 Resizing or Relocating the Screen A detailed description of each function is provided. Refer to your product for details. Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 5.1.1 Changing the Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.2 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Resizing or Relocating the Screen Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Resizing or Relocating the Screen Transparency Set the transparency for the menu windows. 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Reset All Return all the settings for the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.1.1 Initializing Settings (Reset All) 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.2 Setup and Reset Smart Eco Saving The Smart Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. z This menu is not available when Eye Saver Mode is enabled. z Game Mode will automatically turn off when Smart Eco Saving is enabled. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.2.
6 6.3 Setup and Reset Off Timer Plus You can set the product to automatically turn off. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.3.1 Configuring Off Timer Off Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to SETUP&RESET and press [ ] on the product.
6 Setup and Reset 6 7 z Off: Deactivate the off timer so that the product does not power off automatically. z On: Activate the off timer so that the product powers off automatically. Press [ ] to move to the option you want and press [ ]. The selected option will be applied. Turn Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 Setup and Reset 6.3.2 Configuring Eco Timer Eco Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Eco Timer and press [ ] on the product. Press [ ] to move to Eco Timer and press [ ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset Eco Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Eco Timer and press [ Press [ ] to move to Eco Off After and press [ ] on the product. ] on the product. ] on the product. ] on the product. The following screen will appear.
6 6.4 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. z This function does not support Analog mode. z Supplied for the wide models only such as 16:9 or 16:10. z If the monitor (when set to DVI/HDMI/DP) is in power saving mode or is displaying the message Check Signal Cable, press the [ MENU ] button to display the On Screen Display (OSD). You can select PC or AV.
6 Setup and Reset S22E450F / S24E450F PC/AV Mode PC/AV Mode DVI PC HDMI AV Select the PC/AV mode for the DVI source. Select the PC/AV mode for the HDMI source. DVI PC HDMI AV AUTO AUTO S23E650K PC/AV Mode Select the PC/AV mode for the HDMI source. PC HDMI AV DVI PC AUTO S24E650MW PC/AV Mode Select the PC/AV mode for the DVI source. PC DVI AV AUTO S24E650PL PC/AV Mode PC/AV Mode HDMI PC DisplayPort AV Select the PC/AV mode for the HDMI source.
6 6.5 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.5.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product.
6 6.6 Setup and Reset Source Detection You can activate Source Detection. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.6.1 Configuring Source Detection 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Source Detection and press [ ] on the product. ] on the product.
7 7.1 INFORMATION Menu and Others A detailed description of each function is provided. Refer to your product for details. INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness, Contrast and Sharpness from the Initial Screen Adjust the Brightness, Contrast and Sharpness setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). Brightness : SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Smart Eco Saving is enabled. This menu is not available when Eye Saver Mode is enabled.
7 7.3 INFORMATION Menu and Others Configuring Volume in the Initial Screen Adjust the Volume by pressing the [ 1 Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ 2 ] button when the Key Guide is displayed. Press the [ ]. ] button to alternate between the Brightness, Contrast and Volume settings. The following screen will appear. Contrast Volume 10 Brightness 3 Adjust the Volume setting using the [ ] buttons.
8 8.1 Installing the Software MultiScreen MultiScreen "MultiScreen" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click "Next".
8 Installing the Software Hardware z At least 32MB of memory z At least 60MB of free space on the hard disk drive 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "MultiScreen" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues Solutions The power LED is off. The screen will not switch on. Check that the power cable is connected properly. (Refer to "2.2Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.2Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Issues There is no image on the screen and the power LED blinks every 0.5 to 1 second. Solutions The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Sound issue Issues There is no sound. Solutions Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. z Windows XP: Go to Control Panel Display Settings Appearance and Themes Advanced Monitor, and adjust Refresh rate under Monitor settings. z Windows ME/2000: Go to Control Panel Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer z Windows XP: Go to Control Panel Display z Appearance and Themes Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. z Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
10 Specifications 10.1 General (S22E450F / S22E650D) Model Name Panel S22E450F Size 22 CLASS (21.5 inches / 54.6 cm) Display area 476.64 mm (H) x 268.11 mm (V) S22E650D 18.8 Inches (H) x 10.6 Inches (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.009774 Inches (H) x 0.009774 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.2 General (S23E650D / S23E650K) Model Name Panel S23E650D / S23E650K Size 23 CLASS (23.0 inches / 58.4 cm) Display area 509.184 mm (H) x 286.416 mm (V) 20.0 Inches (H) x 11.3 Inches (V) Pixel Pitch 0.2652 mm (H) x 0.2652 mm (V) 0.010441 Inches (H) x 0.010441 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 542.9 x 321.
10 Specifications Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.3 General (S24E450F) Model Name Panel S24E450F Size 24 CLASS (24 inches / 60.9 cm) Display area 531.36 mm (H) x 298.89 mm (V) 20.9 Inches (H) x 11.8 Inches (V) Pixel Pitch 0.27675 mm (H) x 0.27675 mm (V) 0.010896 Inches (H) x 0.010896 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 565.4 x 333.2 x 56.6 mm / 3.40 kg 22.
10 Specifications Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.4 General (S24E650PL / S24E650XL) Model Name Panel S24E650PL / S24E650XL Size 24 CLASS (23.6 inches / 59.8 cm) Display area 521.28 mm (H) x 293.22 mm (V) 20.5 Inches (H) x 11.5 Inches (V) Pixel Pitch 0.2715 mm (H) x 0.2715 mm (V) 0.010689 Inches (H) x 0.010689 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 554.
10 Specifications Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.5 General (S24E650DW / S24E650MW / S24E650XW) Model Name Panel S24E650DW / S24E650MW / S24E650XW Size 24 CLASS (24.0 inches / 61.1 cm) Display area 518.4 mm (H) x 324.0 mm (V) 20.4 Inches (H) x 12.8 Inches (V) Pixel Pitch 0.270 mm (H) x 0.270 mm (V) 0.01063 Inches (H) x 0.01063 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
10 Specifications Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.6 General (S27E650D / S27E650X) Model Name Panel S27E650D / S27E650X Size 27 CLASS (27.0 inches / 68.5 cm) Display area 597.9 mm (H) x 336.3 mm (V) 23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) 0.01226 Inches (H) x 0.01226 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 639.0 x 378.1 x 57.
10 Specifications Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.7 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and making the Power LED blink if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a powersaving function.
10 Specifications PowerSaver Power Consumption (S24E650MW) Power Consumption (S24E650XW) Power Consumption (S27E650D) Power Consumption (S27E650X) Normal operation mode Power saving mode Typical 32 W Typical 0.3 W Typical 30 W Typical 0.3 W Typical 26 W Typical 0.3 W Typical 28 W Typical 0.3 W Power off (Power button) Less than 0.005 W (0 W mode) Less than 0.005 W (0 W mode) Less than 0.005 W (0 W mode) Less than 0.
10 Specifications 10.8 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications S22E450F / S22E650D / S23E650D / S23E650K / S24E450F / S24E650PL / S24E650XL / S27E650D / S27E650X Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.
10 Specifications S24E650DW / S24E650MW / S24E650XW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1440 x 900 55.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. z z z If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Index B I Before Connecting 42 Image Size 63 Blue 73 INFORMATION 90 Brightness 53 Installation 36 C K Cleaning 8 Key Repeat Time 88 Coarse 69 Color Tone 74 Connecting and Using a PC 43 L Language 76 Contrast 54 Copyright 7 Correct Disposal 119 Correct posture to use the product 18 D Display Time 78 E Eye Saver Mode 56 M MultiScreen 93 O Off Timer Plus 82 P Parts 21 PC/AV Mode 86 PowerSaver 112 F Fine 70 Q Q & A 98 G Game Mode 57 Gamma 75 General 100 Green 72 R Red 71 Requirements Bef
Index S Safety Precautions 10 SAMSUNG MAGIC Angle 60 SAMSUNG MAGIC Bright 58 SAMSUNG MAGIC Upscale 62 Sharpness 55 Smart Eco Saving 81 Source Detection 89 Standard Signal Mode Table 114 T Terminology 120 Transparency 79 Index 123