Assembly Instructions

SMART UNIT MANUAL

samsaraluggage.com

SMART UNIT ASSEMBLY

Insert smart unit to port until stopper is in place.

OPEN / CLOSED UNIT MODE

When panel is open, all smart features are available

When panel is closed only Distance Alert and Charging are available.

ON / OFF BUTTON

- 3 second press: device on / off

- 2 short presses: open light/close light regardless to dark environment.

LED LIGHT

- Panel can be moved for lighting different parts of the suitcase.

- Sensors should not be covered for dark environment conditions detection.

- 2 short presses will open/close light regardless to dark environment.

USING SAMSARA APP

Distance Alert Open Suitcase Alert Led Light

Battery& charging

CHARGING SMART UNIT:

USB-C

1. Download “Samsara Luggage” App from App Store or Google Play. 2. Enable Bluetooth on mobile

phone

3. Paring: the first time you use Samsara smart unit with your mobile phone you need to pare the devices:

- Open settings bar

- Activate application

- To activate smart unit press the “on” button on the device for 3 seconds. - Find your Samsara device on

PAGE 1
SMART UNIT MANUAL samsaraluggage.com SMART UNIT ASSEMBLY Insert smart unit to port until stopper is in place. OPEN / CLOSED UNIT MODE When panel is open, all smart features are available When panel is closed only Distance Alert and Charging are available. ON / OFF BUTTON - 3 second press: device on / off - 2 short presses: open light/close light regardless to dark environment. LED LIGHT - Panel can be moved for lighting different parts of the suitcase.
PAGE 2
“device list” - Press “connect” Notice: the unit should not be turned on while flying (between takeoff and landing). USB-C from unit connected to power bank or electricity via USB. CHARGING MOBILE DEVICE: USB / USB-C from unit connected to mobile device. Press On/Off button to charge. CHARGING LAPTOP: USB-C from unit connected to computer via USB-C. APP FEATURES DISTANCE ALERT 1. When "distance alert" square on App is yellow - feature is active. To disable press the feature square, and turn to white. 2.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.