User's Manual

ManualsBrandsSAMMIC ManualsElectronicsSMARTVIDE

SAMMIC SMARTVIDE BOX MANUAL

I. INTRODUCTION

The device brings you much convenience for your business designed, it brings you wonderful user

experience, designed to give more functions and friendly user interface to work with our Sammic

machines. This guide serves to enable users to get to know and familiar with the product as soon as

possible. Here we have made a brief introduction in figures and words. Before beginning, please

refer to this user manual carefully.

*Software not included

This manual describes the installation, operation and maintenance of the SmartVide Box. The

model reference and its characteristics appear on the name plate attached to the machine. This

device has been designed and manufactured in accordance with the following standards:

- FCC part 15 subpart C FCC part 15.247

- Electromagnetic Compatibility of Multimedia Equipment EN 55032

- Electromagnetic Compatibility, Immunity requirements EN 55035

- EMC limits for harmonic current emissions EN 61000-3-2

- EMC limitation of voltage changes, fluctuations and flickers EN 61000-3-3

- Electromagnetic compatibility (EMC) standard ETSI EN 301489-1

- Electromagnetic compatibility (EMC) standard ETSI EN 301489-17

- Wideband transmission systems Bluetooth 4.0 EN 300328

- Wideband transmission systems Bluetooth 2.1 EN 300328

- Wideband transmission systems IEEE 802.11b/g/n EN 300328

- EMF assessment EN 62479:2010

- Degrees of protection provided by enclosure (IP65): IEC 60529:2013

- Information technology equipment – Safety: IEC 60950-1

- RoHS EU Directive 2011/65/EU

II. SAFETY AND PREOCAUTIONS BEFORE USE

To reduce the possibility of accidents and ensure the best functioning and the proper maintenance

of the machine, it is necessary to carefully read and follow these instructions. Keep these

instructions and ensure that all users of the machine read them before use. Also keep the warranty

and the declaration of conformity.

1. Prevent this product from falling to the ground in could be strongly damaged.

2. Keep the device away from rain, moisture, direct sunlight and heat source.

3. Avoid liquid getting inside the device and never submerge it in water or any kind of liquid.

4. Once any water or other liquid splashed onto this product, close it immediately and do not

use it until it dries out.

5. Avoid using it in the strong magnetic and strong static environment as much as possible.

6. Clean the device with the power cord unplugged.

Summary of content (7 pages)

PAGE 1
SAMMIC SMARTVIDE BOX MANUAL I. INTRODUCTION The device brings you much convenience for your business designed, it brings you wonderful user experience, designed to give more functions and friendly user interface to work with our Sammic machines. This guide serves to enable users to get to know and familiar with the product as soon as possible. Here we have made a brief introduction in figures and words. Before beginning, please refer to this user manual carefully.
PAGE 2
SAMMIC SMARTVIDE BOX MANUAL 7. Do not clean this product with any detergent containing chemical element or other liquid to avoid causing damage due to corrosion and becoming damp. If cleaning is necessary, clean it with dry soft cloth tissue paper. 8. Handle the screen gently. To clear fingerprints or dust on the screen, use soft cloth dedicated for camera lens instead of gauze. 9. Please do not disassemble this product by yourself; otherwise you will lose the right to warranty. 10.
PAGE 3
SAMMIC SMARTVIDE BOX MANUAL III. HARDWARE DESCRIPTION Our device SmartVide Box is designed to empower our Sammic machines with friendly design. The device has a 10” touch display with an aluminium alloy case (1). It must screw the antenna (2) for wireless connection as Bluetooth and Wifi to connect to our machines and for our online services. It must be powered with the power supply (3) to use SmartVide Box, our device does not have an internal battery.
PAGE 4
SAMMIC SMARTVIDE BOX MANUAL IV. BASIC OPERATIONS 1. Set language and date. 2. Wireless connectivity: Bluetooth, Cast, Wifi Enable or disable the connectivity.
PAGE 5
SAMMIC SMARTVIDE BOX MANUAL 3. Main applications Touch the application to access it 4. Software version Connect the devices to Wifi, it will automatically check the lastest stable software version.
PAGE 6
SAMMIC SMARTVIDE BOX MANUAL V. ERASE ALL DATA TO DEFAULT CONFIGURATION Touch and hold down the SMARTVIDE logo for ten seconds and release. A window will appear to guide you.
PAGE 7
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the followi ng two conditions: (1) this device may not cause harmful interference, and (2) this dev ice must accept any interference received, including interference that may cau se undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.