Industrial Tablet SmartTablet User ’s Manual SAMMI Information Systems Co., Ltd.
FCC (Federal communiction commission) This device was tested for typical body-worn operations. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.
AC/DC Adaptor/Battery Charger. Lithium-Ion Rechargeable Battery Pack User’s Manuals.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) hereby declares that the product Product Name: Industrial Tablet PC Model Number: Smart Tablet Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules.
THINGS TO BE CAREFUL: Do not disassemble SmartTablet at any time. Do not use AC/DC adapter/battery charger other than the one with the package. Keep away from any object with magnetic field. Keep away from the fire flame. Do not leave SmartTablet exposed to direct sunlight. Keep battery separately if SmartTablet is not in use for a long period time. Do not touch the screen with any sharp object. Connect the USB Camera only to the USB port on the top of SmartTablet.
CONTENTS Chapter 1. APPEARANCE Chapter 2. KEY FUNCTIONS Chapter 3. SETTING UP SmartTablet HARDWARES 1. Installing the battery pack . 2. Connecting to the power. 3. Charging Time. 4. Handle the Battery Pack With Cautions. Chapter 4. USING AND SETTING SmartTablet 1. Power on. 2. Power off. 3. Rotate Button Setting. 4. Media Player 6.4 Setting. 5. Display setting 6. Touch Screen. 7. One Touch Setting 8. Stylus Pen. 9. Installing PCMCIA Card. 10. Connecting Monitor. 11. Master Volume Setting 12.
3. Power Management Chapter 6. APPLICATIONS OF BLUETOOTH 1. Before using Bluetooth 2.
Chapter 1.
Top USB Bottom PS/2 USB DC In Stylus Pen Mini VGA Port PCMCIA Slot Right Side Speaker Jack Battery Left Side Mic Jack CONFIDENTIAL Page 9 2004/8/20
Chapter 2. KEY FUNCTIONS: This chapter describes key-button operation. 1 5 9 Alt Battery LED Tab 2 Arrow 3 Ctrl 4 Rotate 6 Power key 7 GPS (Keyboard Key) 8 Esc 10 Enter 11 Mic 1. Alt Key. Works as Alt key of the keyboard in Windows mode. 2. Arrow Keys. Work as Arrow Keys of the keyboard in Windows mode. 3. Ctrl Key. Works as Ctrl Keys of in the keyboard in Windows mode. 4. Rotate Key.
Rotates the whole screen 90 degrees. 5. Battery LED. In charging(Power On) : Red light - On In charging(Power Off) : Red light – Blinking Request to charge(Power On) : Red light Fully Charged (Power On): Green light – On Fully Charged (Power Off): Light off 6. Power Key. Powers SmartTablet on and off. Hibernate mode function can be added by changing the Windows’ setting.
ALT + DOWN ARROW ALT + Ctrl ALT + ROTATE ALT + KBD => INPUT ID(In the Future) ALT + ESC => ACTIVATED WINDOW CLOSE OR SYSTEM RESET ALT + TAB => ACTIVATED WINDOW CONVERSION ALT + ENTER + KBD => BRIGHT DOWN LCD PANEL => SYSTEM RESET => NUMBER KEY(TOGGLE) => WHOLE SCREEN DISPLAY AT WINDOWS MEDIA PLAYER Ctrl + TAB => ACTIVATED CALIBRATION MODE TO CALIBRATE TOUCH PANEL CONFIDENTIAL Page 12 2004/8/20
Chapter 3. SETTING UP SmartTablet HARDWARES: 1. Installing the battery pack to SmartTablet. The rechargeable battery is packed separately from SmartTablet and should be slide in very carefully to the bottom of SmartTablet. The battery should be fully charged before using it for the first time. 2. Connecting to the power. - Connect AC/DC adapter/battery charger to the power port located on the right side of SmartTablet. - Connect AC/DC adapter/battery charger to the power receptacle.
Chapter 4. USING AND SETTING SmartTablet. 1. Power on. After battery pack is fully charged, press the Power Key. The green Power LED light will be on indicating the power is on. 2. Power off. There are two ways of powering SmartTablet off. 1. Shut down the system from Windows. - Select Start from Taskbar -> Select Shut Down from Start menu. - Check Shut Down from Shut Down Windows menu -> Select OK. 2. Changing the function of Power Key. - Select Start from Taskbar-> Select Settings -> Select Control Panel.
3) Select “Lynx3DM+”, and Press “Hot Key Settings” button. 4) Setting “90 degree” to “Ctrl + Shift + F11” and “Turn off special mode” to “Ctrl + Shift + F12”, and then click “OK” button.
4. Media Player 6.4 Setting. To see high quality movie, Windows Media Player 6.4 is better than Windows Media Player 7.0 1) Execute “C:₩Program files₩Windows Media Player₩Mplayer2” 2) Select “View” in the menu bar and Click “Option”.
3) Select “Formats”.
5. Display setting 1) [Start] -> [Setting] -> [Control Panel] -> [Display Properties] 2) Select “High Color(16 bit)” 3) Manupulate 800 by 600 pixels 4) Select “Apply the new color settings without restarting?”, and then click “OK” button. 6. Touch Screen.
applications/programs or to draw in the Paint application. 1) Click Touch Configuration Icon Touch Configuration Icon 2) Check that Connect is “OK” sign in “Controller Information” Frame. If not, Click “Auto” Button and then “OK” sign could appear. 3) Choose “TIME” mode in Right Button, and adjust Cursor Offset Arrow if you would set the curser more correctly.
4) If you calibrate the touch panel in SMARTTABLET, click “Calibration” button. First point 5) First point should be touched in 1~ 2 second and then “Calibration first point success” Box would come out, if you do calibrate correctly. Second point should be done in same way. Note : Push “Ctrl + Tab” Key in SMARTTABLET, if the touch panel doen’t work correctly. Second point 6) If you’d like to test touch position or status, Click “Draw” button and then check them.
*** Touch Program Installing and Setting 1) Click Setup icon in C:₩Sammi₩DigiTouch 2) Click Next 3) Click Next CONFIDENTIAL Page 21 2004/8/20
4) Select USB to connect to Touch Screen and click Next 5) Click Finished Button. DTR Information (Controller Information) 6) Click Digitouch icon in Desktop. Digitouch System Touch Panel Information would be displayed.
7. One Touch Setting (Not recommended) Note : If you’d like to choose “One click” Option, you have to choose “ICON” Mode instead of “TIME” Mode in Touch configuration. 1) Select “Tools” in Menu bar, and click “Folder Options”.
8. Stylus Pen. Inputs the characters in certain applications such as Excel, Word, PowerPoint and etc. or while system setting. 9. Installing PCMCIA Card. Refer to the related manuals while installing driver for Modem or LAN card. - Insert the PCMCIA card or into PCMCIA slot of SmartTablet, and then follow the related manuals. (Note that SmartTablet supports both 3.3 volts and 5 volts:) 10. Connecting Monitor. Connect one end of included mini VGA cable to VGA port of SmartTablet and other end to Monitor. 11.
3) Check “Microphone” and Click “OK” button.