Leader In Mobile SmartNL-RF2000 User Guide September (Ver. 1.
Leader In Mobile Copyright All rights reserved. The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service SAMMI INFORMATION SYSTEM CO.,LTD. manufactured equipment and is not to be released, reproduced, or used for any other purpose without the written permission of SAMMI INFORMATION SYSTEM CO.,LTD. Throughout this manual, trademarked names might be used.
Leader In Mobile description on the face here of. This warranty extends only to the original purchaser, and shall not apply to any products or parts that have been subject to misuse, neglect, accident, or abnormal conditions or operations. Claims for damage in transit are directed to the freight carrier upon receipt. Disclaimers The information in this manual has been carefully checked and is believed to be accurate. SAMMI INFORMATION SYSTEM CO.,LTD.
Leader In Mobile FCC Information to User This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Leader In Mobile Safety message Notices for the Safety’ should be complied by the users to use the product safely and correctly and prevent the occurrence of any accident or danger. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury 1. Supply the power according to the condition described in the product rated power specification. It may cause the electric shock, fire, malfunction, product damage or deterioration. 2.
Leader In Mobile Indicates a potentially hazardous situation which, if not avoided, could result in minor injury or product damage. 1. Do not carry it with overloading. It may cause the injury or product damage. 2. Nobody is permitted to install, operate or maintain the product except the expert. It may cause the injury or malfunction. 3. Do not use any external power sources for the SmartNL-RF2000 other than those specified by Sammi information systems.
Leader In Mobile Table of contents Overview........................................................... ............................................ 7 1. Checking points when unpacking............................................................... 7 2. Check the contents of the carton box: ....................................................... 7 3. Specification with feature............................................................................8 4. Physical Connections..................................
Leader In Mobile Overview This manual is prepared for users to understand the hardware specifications of SmartNL-RF2000 Reader, maintenance and inspections of the system, and trouble shooting required when you use it. NL-RF2000 is a Fixed Type 900MHz RFID Reader, enables user to use RS232 or Ethernet Interface for efficient and convenient use.
Leader In Mobile 3. Specification with feature 1. Performance Characteristics Supported Protocols ISO 18000-6 Type-C, EPC Class 1Gen.2 Operating Frequency 902.75 MHz ~ 927.25 MHz Hopping Channels 50 Channel Spacing 500KHz Channel Dwell Time < 0.
Leader In Mobile 4. Physical Connections Mounting Hall(M4 Size) LED Indicators Data Port: To connect to PC or other device for data transmission or software upgrade. LAN Port: To connect to PC or other device for data transmission or software upgrade. Power Port: Using DC5V/5A adapter to supply power to RFID reader. Antenna Port: Connecting antenna up to 4 using cable.
Leader In Mobile 4-1. LED Indicators LED Description ANT1 ON: Antenna1 Connected / OFF: Not Connected. ANT2 ON: Antenna2 Connected / OFF: Not Connected. ANT3 ON: Antenna3 Connected / OFF: Not Connected. ANT4 ON: Antenna4 Connected / OFF: Not Connected. NETWORK ON: Network connected between Reader and HOST PC / OFF : Not Connected DATA Blinking: Successful tag read/ OFF: Not working ERROR ON: Error condition / OFF : Normal POWER ON: Turn On / OFF: Turn Off 4-2.
Leader In Mobile 4-2-1. Power Ports Assignments Pin NO. POWER PORT 1 VDC- 2 VDC+ 3 GND Operating Ratings DC 5V(3A) 4-2-2. LAN Ports Assignments Pin NO. RJ45 Cable Pin No.
Leader In Mobile 4-2-3. Data Ports Assignments 4-2-4. GPIO Interface Specifications Interface DC Voltage Maximum Current Input 5V – 24VDC - Output 5V – 24VDC Single Output 500mA 4-2-5. Data Port Pin Assignments Pin NO. Description Pin No.
Leader In Mobile 4-3.
Leader In Mobile 5. Installing the SmartNL-RF2000 This section explains how to choose a mounting location for the SmartNL-RF2000 1) Choosing a Mounting Location You can mount the SmartNL-RF2000 to a wall or a beam using the mounting holes 2) Connecting Cables 2-1) Connect LAN cable to main body LAN port for Ethernet communication. Connect data cable for serial communication checking with right direction Ex) Push Pull type connector of the connecter.
Leader In Mobile 6. Antenna Specification. 6-1 Macro200 Specification. 6-1-1 Electrical Specifications. NO. Parameters Spec. Unit 1 Frequency 919 MHz 2 VSWR 1.3 : 1 max. Ratio 3 Impedance 50 Ohms 4 Typical Gain 5.3 dBiL 5 Polarization RHCP 6 Beam Width 70 typical 6-1-2. Mechanical Dimensions. 16 Deg.
Leader In Mobile 6-2. Macro250 Specification 6-2-1 Scope This specification covers the characteristics of the ceramic patch antenna element for the ISM band 6-2-2 Composition and Materials. 1. Substrate : Air & Insulator 2. Electrode Plating : Copper & Aluninum 3. Terminal pin : Heat-resisting ABS 6-2-3 Mechanical Dimensions. ☞ unit: mm NO. Parameters Spec. 1 Frequency 919 2 Band Width @ - 10 dB R.L. 60 min. 80 MHz 3 VSWR 2.0 : 1 max. 1.
Leader In Mobile 6-3. How to install the antenna When installing it on the metal materials which may cause the reduction of read range of Tag. It is recommended to avoid the metal material (SUS material) for bracket which is needed for the clearance. 1. Review the locations where the Reader products are placed. Ensure that you have carefully considered the safe distances for product placement for workers and any other personnel that may get in the RF path.
Leader In Mobile 8. Firmware upgrade 1) Please choose model no.
Leader In Mobile 5) Please open the firmware file. 6) Please click the upgrade button ※Please firmware upgrades to all in the same way no.
Leader In Mobile 9. DHCP Setting 1) Please change your IP address type.
Leader In Mobile 2) Please click Edit TCP/IP Properties.. 3) Please Set the DHCP mode 4) IP Address will be reassigned automatically and star is changed from purple to green.
Leader In Mobile 10. Manufacturer Information If a problem using the equipment Occurs, contact the facility Technical or Systems Support ※Headquarters Sammi Information systems Co., Ltd 11F Kolon Aston Bldg, 505-14,Gasan-dong, Guemcheon-gu, Seoul, 153-803, Korea TEL. +82 2 790-5505 FAX. +82 2 797-9206 ※Marketing and Sales Office SmarTerminal Computer, Inc. 5300 Orange Ave, Suite212, Cypress CA 90630, USA TEL. +1 714-761-5300 FAX. +1 562-252-8272 www.smarterminal.