SM-R400 USER’S MANUAL V2.4.
SM-R400 User’s Manual Company Date Version V2.4.16 Revision history Version Revision Date V2.4.
SM-R400 User’s Manual Company Date Version V2.4.16 CONTENTS 1. Introduction & System composition diagram ..........................................................4 Introduction.................................................................................................................................................4 System composition diagram ............................................................................................................4 2. Composition parts ....................
SM-R400 User’s Manual Company Date Version V2.4.16 1. Introduction & System composition diagram Introduction - This product, as a Bluetooth embedded UHF RFID Reader, is designed for short distance application using the Bluetooth, USB Interface with PC and SMART PHONE, and it provides customers with Compact size, low cost, high performance functions. It supports protocols of ISO18000-6C(EPC C1G2), and it is embedded class2 Bluetooth module.
SM-R400 User’s Manual Company Date Version V2.4.16 *RFID Functional Description The transmitter supports both in-phase quadrature (IQ) vector modulation and polar modulation. The direct IQ upconversion is intended for phase reversal amplitude shift keying (PR-ASK). The polar modulation is intended for double sideband amplitude shift keying (DSB-ASK).
SM-R400 User’s Manual Company Date Version V2.4.
SM-R400 User’s Manual Company Date Version V2.4.16 2.
SM-R400 User’s Manual Company Date Version V2.4.16 3.
SM-R400 User’s Manual Company Date Version V2.4.
SM-R400 User’s Manual Company Date Version V2.4.16 4. Reader Specification UHF RFID Reader Performance Description Value MODEL SM-R400 Architecture UHF RFID Reader Module Protocol EPC Gen2(ISO 18000-6C), Frequency 902.75MHz to 927.25MHz(USA) Max. Tx Power 27dBm±1dBm (0.5W) Power control 5dBm to 27dBm(1dB step) Hopping Channels 50 Channel Spacing 500KHz Channel Dwell time < 0.
SM-R400 User’s Manual Company Date Version V2.4.16 Bluetooth Setting Parameter Parameter Value Local Device Name “Blue Angel” Bluetooth Service Name “Serial Port Profile” Bluetooth Device Address “123456000000 ~ 123456ffffff”(HEX) PIN Code “0000”(ASCII) UART Baud Rate 115200bps UART Parity None UART Stop Bit 1 UART Flow Control None Class of Device(COD) SPP Security Mode Secure Simple Pairing(Bluetooth 2.
SM-R400 User’s Manual Company Date Version V2.4.
SM-R400 User’s Manual Company Date Version V2.4.16 5. How to Run SM-R400 Sample Program 1. Windows XP/7 1.1 File name : Reader@Express V3.2.24.zip 1.2 Simple use : 0. Add bluetooth device (Reader), and confirm relevant communication port in device manager. 1. Decompress the file. Execute reader@express.exe. 2. Designate communication port → Select from combo box located at top upper left side. 3. Click [OPEN] button → It is right below the combo box located at upper left side 4.
SM-R400 User’s Manual Company Date Version V2.4.16 You can connect with bluetooth reader in following method. 1. If you select [Search] in [Option menu], then the window to select bluetooth device appears. Already paired devices are appeared on upper part. Because you must search new device therefore click [Scan for devices] Select the device name “Blue Angel” among searched devices at the lower part. 2. Only when you connect first time, Pairing process is progressed – PIN number is “0000”.