User's Manual

ManualsBrandsSamjin LND ManualsElectronicsLUMINAIRE CONTROLL BOARD

User Manual

Pub. Date 2014.03.20

Rev. Date 2014.03.20

Rev. No 0.0

Document No. Model Name

LCRF-STUS

Page

페이지 1 / 5

OEM/Integrators Installation Manual

Product Luminaire Controller

Model Name LCRF-STUS

Manufacture SAMJIN LND Co.,Ltd

Ver. V0.0

Summary of content (5 pages)

PAGE 1
User Manual Pub. Date Rev. Date Rev. No 2014.03.20 2014.03.20 0.0 OEM/Integrators Installation Manual Product Model Name Manufacture Ver. Document No. Luminaire Controller LCRF-STUS SAMJIN LND Co.,Ltd V0.
PAGE 2
User Manual Pub. Date Rev. Date Rev. No 2014.03.20 2014.03.20 0.0 1.Specification Description Material / Finish / Data Model No. LCRF-STUS Luminaire Control Board Encloser non Size / Weight 62.5x 45.5 / 0.03Kg RF Sensing Wall Controller / Radius 25M Network Method RF 900MHz Operating Temp(℃) -10(min) ~25(typical)~45(max) Operating Humidity(℃) -10(min) ~90(max) 2.
PAGE 3
Pub. Date Rev. Date Rev. No User Manual 2014.03.20 2014.03.20 0.0 3.Installation 1) located in the junction box of the luminaire, and connects the antenna and the SMPS for integrated installation. No Description Detail(Function) 1 Antenna 2 LCRF-STUS LCRF-STUS Board Construct 3 SMPS SMPS to LCRF-STUS Connect 917.1MHz~923.3MHz Antenna . Document No.
PAGE 4
User Manual Pub. Date Rev. Date Rev. No 2014.03.20 2014.03.20 0.0 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
User Manual Pub. Date Rev. Date Rev. No 2014.03.20 2014.03.20 0.0 This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains FCC ID: TSW-LCRFSTUS ".