Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 USER MANUAL Product Luminaire Control Wireless Module Model Name BTLEM4 Manufacture SAMJIN LND Co.,Ltd Ver. V0.1 Document No.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 1. Specification Item Contents Model Name BTLEM4 Modulation GFSK Frequency Bandwidth 2.402GHz ~ 2.480GHz Number of Channel 40 channels Receiver Sensitivity -92.5dBm RF Sensing Radius 25 m Enclosure None Operating Voltage d.c. 5 V ± 5% Temperature Environment Operating : -30 ~ 85 ℃ Storage: -30 ~ 85 ℃ Operating Humidity (%) 10 (min) ~ 90 (max) Size/Weight 60 x 17x 6.2 mm/5 g Document No.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 2. Operation 1) A device which is connected to an SMPS and modulates color temperature and brightness of luminaires by receiving the signal from Smart-phone or Tablet App. 3. Installation 1) Located inside the luminaire, and connects the SMPS for integrated installation. No Description 1 BTLEM4 2 SMPS Document No.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 3. Application Guide 3.1 Setting Password Document No.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 3.2 Adding New Lights 3.3 Manage Lights Document No.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 3.4 Light Control Screen 3.5 Turning Lights On/Off Document No.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 FCC Statement NOTICE; 1. The RF module limited to OEM installation ONLY. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. 2. This device complies with part 15 of the FCC Rules.
Pub. Date Rev. Date Rev. No User Manual 2015.07.24 2016.03.03 0.1 The module is not possible to apply for portable products. This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
