User's Manual

ManualsBrandsSAM JIN ManualsElectronicsMultipurpose Sensor

Meet your

Multipurpose Sensor

The most versatile device in the Samsung SmartThings™

family, the Multipurpose Sensor acts as an open/closed,

vibration, orientation, and temperature sensor all in one.

Multipurpose Sensor components

Multipurpose Sensor

Magnet

Magnet Alignment Mark

Wall Plate

Magnet

Wall

Plate

MAX 0.4in

10mm

Template for wall mounting:

Multipurpose Sensor

Installation Tips

The Multipurpose Sensor works best if it’s within 15 feet

(4.5 meters) of the SmartThings Hub when you connect it.

If your device doesn’t connect:

If your device doesn’t connect after removing the "Remove

to Pair" tab, hold the “Connect” button while inserting the

battery. Release the button when the LED is lit. The LED will

blink blue while attempting to connect. Then select

“Connect New Device” in the SmartThings app.

How to connect a Multipurpose Sensor

Select “Connect New Device” in the free SmartThings

mobile app and then remove the “Remove to Pair” tab found

in the Multipurpose Sensor.

REMOVE

TO PAIR

Connect Button

LED Light

Use your Multipurpose Sensor to know if doors

are open or closed:

The SmartThings Multi Sensor can monitor whether doors,

windows, cabinets or your garage are open, closed or have

been left open after you leave home. To start, mount one

part of your Multipurpose Sensor on a doorframe, window

frame, or the fixed part of a cabinet or drawer, and place the

other part next to it on the door, window, or part that opens.

Use your Multipurpose Sensor to monitor

temperature:

The Multipurpose Sensor can detect the temperature in the

room where it's located. By placing the Multipurpose Sensor

on a door, window, or cabinet, you can monitor the

temperature and receive alerts if the room gets too hot

or cold.

Multipurpose Sensor

Door or Window

Magnet

Quick-Start

Guide

Summary of content (2 pages)

PAGE 1
Template for wall mounting: Quick-Start Guide Magnet How to connect a Multipurpose Sensor Meet your Multipurpose Sensor The most versatile device in the Samsung SmartThings™ family, the Multipurpose Sensor acts as an open/closed, vibration, orientation, and temperature sensor all in one. Select “Connect New Device” in the free SmartThings mobile app and then remove the “Remove to Pair” tab found in the Multipurpose Sensor. REMOV E TO PAIR Wall Plate MAX 0.
PAGE 2
Safety Instructions Replacing the battery To replace the battery in your Multipurpose Sensor, use a flat tool to carefully remove the battery from the device. Then add a new battery and close the cover back into place. • Read, keep and follow these instructions • Heed all warnings • Do not use this product near water or expose the product to dripping or splashing of any water or liquid. • Clean only with a dry cloth USE CARE when replacing the battery to avoid damaging the device.