OWNER'S MANUAL
Important Safety Information AVIS RISQUE DE CHOC ÉLECTRONIQUE NE PAS OUVRIR This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Introduction Thank you for purchasing the MediaOne BT Powered Studio Monitors with Bluetooth from Samson. Samson MediaOne M30BT and M50BT Powered Studio Monitors Provide every musician and content creator with reliable, full-range sound. Featuring loads of power, these compact speakers bring excellent sound to any personal audio environment for gamers, music enthusiasts, online conferencing and more.
Features • 20 watts (M30BT) or 80 watts (M50BT) of studio quality sound • 3” (M30BT) or 5” (M50BT) woven carbon fiber woofers • 3/4" silk dome tweeters • Crystal clear high-end performance • Exceptional bass responser • Stereo RCA inputs • Bluetooth Audio streaming • Bass boost switch • Headphone output mutes speakers • Stereo 1/8” Sub output • Speaker cable included 5
Quick Start The MediaOne BTmain input connections can be made via the rear panel RCA inputs. Follow the simple steps and diagram below for connecting an audio source to the speakers. 1. Connect the left and right speakers using the included two-conductor 1/8” (3.5mm) speaker cable. 2. Turn the MediaOne BT Volume control completely counter-clockwise until it clicks to the minimum/off setting. 3. Connect the MediaOne BT to an AC power outlet using the included power cable. 4.
Adding an Active Subwoofer Adding a subwoofer to extend the low frequency response of your monitor system can be beneficial when mixing your music. Typically, it is best to set the subwoofer level to be equal to that of the main speakers. Because deep-bass frequencies are nondirectional, it is difficult for our ears to locate the sound source, and the precise placement of the subwoofer is not as critical as the main speakers. The ideal location is between the two main speakers.
Positioning the Speakers A major objective when setting up your studio monitors is to obtain the best possible stereo image. The MediaOne BT monitors are designed to be used in a vertical position, with the tweeter and woofer symmetrically in line. Do not place these speakers horizontally as this will cause an offset in sound between the woofer and the tweeter, limiting your ability to find optimal listening positions.
Having Trouble with your MediaOne Monitor Speakers? We can help! CONTACT OUR SUPPORT TEAM: support@samsontech.com Our experts can help you resolve any issues.
Specifications - M30BT Low Frequency Speakers 3” (76.2mm) woofer, woven carbon fiber with butyl surround High Frequency Speakers 3/4” silk dome tweeter Frequency response 50Hz - 20kHz (-2dB) Amplifier Power Rating 2 x 10 watts Distortion (T.H.D.) <0.1% Signal-To-Noise 83dB Input Connectors RCA (rear panel) Headphone 1/8” (3.5mm) Stereo Output Stereo / Sub Output 1/8” (3.5mm) Bluetooth V5.
Specifications - M50BT Low Frequency Speakers 5.25” (134.09mm) woofer, woven carbon fiber with butyl surround High Frequency Speakers 3/4” silk dome tweeter Frequency response 50Hz - 20kHz (-2dB) Amplifier Power Rating 2 x 40 watts Distortion (T.H.D.) <0.1% Signal-To-Noise 83dB Input Connectors RCA (rear panel) Headphone 1/8” (3.5mm) Stereo Output Stereo / Sub Output 1/8” (3.5mm) Bluetooth V5.
Samson Technologies Corp. 278-B Duffy Ave Hicksville, New York 11801 www.samsontech.