6-CHANNEL TRUE DIVERSITY UHF WIRELESS SYSTEM OWNER'S MANUAL
Copyright 2013, Samson Technologies Corp. v1.2 Samson Technologies Corp. 45 Gilpin Ave Hauppauge, NY 11788 www.samsontech.
Important Safety Information ATTENTION RISQUE D’ÉLECTROCUTION ! NE PAS OUVRIR ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Features . . . . . . . . . . . . . . . . . . . . . . . . . 7 System Components . . . . . . . . . . . . . . . . . . . . . . . 7 Guided Tour - CR88 Receiver . . . . . . . . . . . . . . . . . . .8 Guided Tour - CB88 Belt Pack Transmitter . . . . . . . . . . . . 10 Guided Tour - CH88 Handheld Transmitter . . . . .
Introduction Congratulations on purchasing the Samson Concert 88 wireless system. The Concert 88 is the ideal solution for the active performer who needs a reliable, great sounding system for wireless applications. Featuring simple operation, with 16 available channels and infrared set for the transmitter channel, the Concert 88 can quickly be up and running out of the box. The Concert 88 system ensures clear, interruption-free performance by combining tone-key with auto-mute.
System Features • Professional wireless system for use in both live sound and sound contracting applications • True diversity technology maximizes active range (up to 300 feet) and reduces potential interference • 16 available channels operating in the UHF band designed for maximum system compatibility in the same location without interference • The CR88 receiver is a half-rack unit that can be used freestanding or can be mounted in any standard 19" rack using the included rack kit, making it easy to
Guided Tour - CR88 Receiver 1. Antennas - The antenna mountings allow full rotation for optimum placement. In normal operation, both antennas should be placed in a vertical position. Both antennas can be folded inward for convenience when transporting the CR88. 2. VOLUME Control - This knob sets the level of the audio signal being output through both the balanced and unbalanced output jacks on the rear panel. Reference level is obtained when the knob is turned fully clockwise (to its “10” setting). 3.
Guided Tour - CR88 Receiver FREQ: 542-566MHz This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. DC Input - Connect the supplied power adapter here, using the strain relief as shown in the illustration below. WARNING: Do not substitute any other kind of power adapter.
Guided Tour - CB88 Belt Pack Transmitter 1. Input Connector - Connect the input device via the mini-XLR connector. The CB88 is supplied with either a lavalier, headset microphone or ¼" instrument cable. 2. Status Indicator - This LED displays the operation mode: GREEN Normal Operation RED Mute Flashing GREEN Low Battery 3. Power/Mute Switch - Press and hold to turn the unit on or off. Press and release to mute or unmute the transmitter. 4.
Guided Tour - CB88 Belt Pack Transmitter 7. Input GAIN Control - This control adjusts the transmitter input sensitivity to work with microphone and instruments inputs. For optimal performance, using the included screwdriver, set the input GAIN control to where you see the CR88 PEAK indicator start to light under high levels, then turn down slowly until the PEAK light stops lighting. 8.
Guided Tour - CH88 Handheld Transmitter 1. Status Indicator - This LED displays the operation mode: GREEN Normal Operation RED Mute Flashing GREEN Low Battery 2. Power/Mute Switch - Press and hold to turn the unit on or off. Press and release to mute or unmute the transmitter. 3. Battery Cover - Unscrew the battery cover and slide down to open the CH88 battery compartment. 4. Battery Holder - Open the battery holder by pressing the tab and lifting the cover.
Quick Start - Single System Setup In order for your wireless system to work correctly, both the receiver and transmitter must be set to the same channel. Follow this basic procedure for setting up and using your Concert 88 wireless system: Physically place the CR88 receiver where it will be used, and extend the antennas vertically. The general rule of thumb is to maintain “line of sight” between the receiver and transmitter so that the person using or wearing the transmitter can see the receiver.
s Select button to change channel 7. Install batteries Quick Start - Single System Setup With the transmitter powered off, install two fresh AA batteries into the CB88 belt pack or CH88 handheld transmitter. Leave the battery compartment open. 8. Press button on transmitter to turn on 9. Press and 7. Install batteries Turn on7.the power to the transmitter by pressing and holding Power switch; the indi-to turn on Install batteries 8. Press button on transmitter cator LED will light green. 8.
