User's Manual

! Version!1.0!
Installation/User!Guide:!miniSmartPlug!(SAU2A P1/!SX 885 ZB)!
In#the#Box #
!
NOTE:!
SAFETY INSTRUCTION
Read these instructions carefully before installing and using the miniSmartPlug and keep this guide
in a safe place for future reference.
• Verify compatibility with your associated connected home system before installation.
• Follow all instructions provided by your connected home manufacturer regarding the addition
of devices to your connected home system. An authorized, qualified installer may be required.
Salus accepts no responsibility for damage caused by not following these instructions.
!
!
Additional equipment may be
required due to building
construction or materials, or
other radio interference that
may reduce the radio range.
!
miniSmartPlug!
Installation/User!G uid e !
!
!
PRODUCT INTRODUCTION
The Salus miniSmartPlug switch is a ZigBee compatible,
connected AC switch that gives ON/OFF control of the
attached AC appliance and measures the power/energy
consumption of the appliance. Key features include:
• Quick and easy installation
• Support for OpenHome and ZigBee™ wireless connected
home systems
• Support for loads up to 15Amps (resistive).
CONTROLS AND INDICATORS
Item
Description
Plug
NEMA 5-15 (Type B) plug. Compatible with US
and Canadian standard 120VAC/15A electrical
outlets
Socket
NEMA 5-15 grounded (Type B) outlet.
Compatible with US/Canadian standard
120VAC/15A electrical plugs
Multi
Button
Multi-function user input button:
Pair, Rejoin, Factory Defaults, and On/Off
LED
White LED status indicator
PAIRING INSTRUCTIONS
• Prepare to add devices per your system’s instructions.
• Plug the miniSmartPlug switch into the desired AC outlet to
account for any radio interference
• When the switch is detected, follow your system’s
instructions to finish adding the switch to the system. You
may need to press the Multi Button to identify the device.
USING THE DEVICE
TURN OFF/ON
• To toggle the miniSmartPlug switch (turn ON when OFF, or
turn OFF when ON), press the Multi Button.
RESET TO FACTORY DEFAULTS
• To reset the device to factory default settings, press the
Multi Button while plugging in the device and release the
button when the LED comes on.
FORCE REJOIN TO CURRENT NETWORK
• To find a better path to the connected home system if the
network is intermittent and/or other devices are
added/deleted, press the Multi Button 5 times quickly (less
than ½ sec between presses).
OVERRIDE USING APPLIANCE ON/OFF SWITCH
• The on/off switch for certain appliances can be monitored
by the miniSmartPlug switch to allow the user to use the
appliance switch to turn ON/OFF the miniSmartPlug switch.
• To toggle the miniSmartPlug switch using the appliance
on/off switch, turn the appliance switch off for ½ second,
then back on. The miniSmartPlug switch will detect the brief
off period and change its state.
• Certain appliances cannot be monitored, such as CCFL
lamps and electronic devices using wall transformers, since
their electrical characteristics do not change enough when
the appliance on/off switch is changed.
LED INDICATIONS
ON for 2 or 4 sec.
Device power up. Switch is OFF.
3 flashes
Searching for network to join
ON
Switch is ON
OFF
Switch is OFF
Flash OFF every 2 sec
Switch is ON, no network
Flash ON every 2 sec
Switch is OFF, no network
TROUBLESHOOTING
WILL NOT PAIR INITIALLY
• Radio interference is present at the desired location.
1) Relocate the ZigBee receiver,
2) Select a different location for the device, or
3) Add a ZigBee repeater to the system.
LOSS OF CONNECTION AFTER PAIRING
• Make sure ZigBee receiver is operating
• Radio environment may have changed:
1) Force rejoin to possibly find a better radio path or
2) Apply radio interference solutions above.
APPLIANCE DOESN’T TURN ON WHEN LED ON DEVICE IS ON
• Make sure the attached appliance is turned ON.
• Make sure the appliance can be controlled via the AC
supply. Appliances with “soft” on/off buttons or that use
wall transformers cannot be turned on by turning the AC
supply ON.
SWITCH DOESN’T TURN ON WHEN APPLIANCE SWITCH IS TURNED OFF
THEN BACK ON
• Make sure the appliance is working properly by turning
ON the miniSmartPlug switch and using the appliance
on/off switch to control the appliance.
• Make sure the appliance on/off switch can be monitored,
i.e., it is not a “soft” on/off, behind a wall transformer,
CCLF lamp, etc.
Plug
Socket
LED
Multi Button