Fitting Guide

How to use
2 Download application
You can charge the insoles without taking
out them from the shoes. Our insoles are
optimally designed for charging while
insoles are inside of shoes.
3 Connection between insoles and application
Through the QR link, you can download
and use the various apps we provide.
Take out the insoles of shoe and cut it to the same size.
Please be careful not to cut over the bottom line that
marked on the product. If sensor is damaged, it may not work.
Fitting guide
Please follow the below guide to use the insoles properly
1 Charge insoles
1) Connect the wireless charging pad to the electrical power adapter with the
included electrical charging cable.
2) Power adapter is not included, and it is recommended to use the product
rated voltage for 5V, 1.5~3A.
3) When you place the back-heel part of
insoles on the charging pad, the side
LED shows the charging status.
1) Place your charged insoles into shoes and turn on the Bluetooth.
2) When you run the downloaded application, you will see the connection
guides provided.
3) Follow the guide until calibration process and it will complete the connection
process. We recommend the calibration process at least once in a month for
the accurate measurement.
4 Enjoy smart insoles
1) Now you can check the proper posture balance and get the recommended
exercise from the application provided by SALTED.
The battery of insoles can last 7 days for standby mode and 3 days for continuous use.
(Usage periods can be varied depends on the condition of the product)
2) If smart insoles are unused for a long time,
please charge before use. You can check the battery level on the applications.
First time to use? Please charge at least 30 minutes before use.
- LED slow flashing : Charging standby
- LED fast flashing : Charging
- LED is on : Fully charged