User Manual

ManualsBrandsSalsbury Industries ManualsFurniture3400 Pedestal Mailboxes PARCEL LOCKER DOOR COMMERCIAL LOCK

SALSBURY INDUSTRIES

1010 East 62

Street, Los Angeles, CA 90001-1598

Ph: 1-800-624-5269

Int’l Ph: 323-846-6700

Fx: 1-800-624-5299

Int’l Fx: 323-846-6800

www.mailboxes.com

engineering@mailboxes.com

Installation instructions are provided as general guidelines. It is advised that a professional inst aller be consulted. Salsbur y Industries assumes no product assembly or installation liabilit y.

PARCEL LOCKER DOOR COMMERCIAL LOCK

3400 Pedestal Mailboxes

Installation Instructions

This installation instruction document is for installing the Commercial lock and two lock covers in a parcel locker door on the 3400 series Pedestal

Mailboxes.

Note

The mailbox is shipped with a Commercial lock that is not installed in

the parcel locker door. This lock is located inside the mailbox on the

shelf of the parcel locker.

Installation

Step 1

Check that the tenant lock cam is pointed upward. Use the tenant

lock key to unlock the tenant lock if necessary. Remove the four (4)

locknuts from the four (4) captive bolts. Do not remove the loose

spacer plate.

Step 2

Install the Commercial lock over the four (4) captive bolts with the

Commercial lock bolt facing upwards. The spacer plate should be

between the Commercial lock and the mounting box. Install and

tighten the four (4) lock nuts. DO NOT OVERTIGHTEN. Check the

locking mechanism for proper operation. See “To Check Locking

Mechanism” instructions on next page.

Step 3

Install the tenant lock cover provided. Use three (3) #10-32 x 1/4”

long pan head screws to secure the tenant lock cover.

Summary of content (2 pages)

PAGE 1
PARCEL LOCKER DOOR COMMERCIAL LOCK 3400 Pedestal Mailboxes Installation Instructions This installation instruction document is for installing the Commercial lock and two lock covers in a parcel locker door on the 3400 series Pedestal Mailboxes. Note The mailbox is shipped with a Commercial lock that is not installed in the parcel locker door. This lock is located inside the mailbox on the shelf of the parcel locker.
PAGE 2
Step 4 Install the Commercial lock cover provided by sliding the tab located on the Commercial lock cover over the mounting box slot. Secure it with the two (2) #10-32 x 1/4” long pan head screws. Installation is complete. To Check Locking Mechanism Lock the tenant lock and remove the key. Lock the Commercial lock and remove the key. Insert the tenant lock key into the tenant lock. Unlock the tenant lock. The tenant lock key should now be trapped in the tenant lock.