DVP-7020 Portable DVD player with two 7” LCD screen Owner’s Manual PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Content A. Introduction ....................................................................... 1 B. Cautions and Warnings ................................................... 1 C. Contents ........................................................................... 3 D. Powering and installation ................................................. 4 E. Controls, Indicators, and Connectors .............................. 6 F. Loading and Playing a Disc ............................................. 8 G. Setup.....
A. Introduction Thank you for choosing the portable DVD player with twin 7” LCD screen. The main features include two 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitors and a single DVD player. Please read the entire instruction manual supplied with this product prior to using. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save this manual for later use. B. Cautions and Warnings 1.
environment,please dispose the battery properly. Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius. 4.Disassemble Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system needs repair. 5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners.
C. Contents 1. 1 x DVD Player 2. 2 x 7” Monitors 3. 1 x Remote Control with battery (CR2025) 4. 2 x DIN to AV Adapter 5. 1 x AC to DC Adapter 6. 1 x Cigarette Lighter Adapter 7. 1 x Instruction Manual 8. 1 x Carry Bag 9. 2 x Pouch for 7” single monitor 10. 1 x Pouch for DVD D. Powering and installation 1.
3. Connection with DVD player and monitors (Refer to Figure 2) The single monitors only can be powered by DVD player. 7 "L CD MO NITOR Figure 2 Note: Unplug the apparatus when not using for a long time or intent to disconnect from the Mains power. 4. Installation Prior to use 1) Pouching the DVD player (Refer to Figure 3) Pull out the slide fastener of the pouch to slide the DVD player into the pouch, and feed the bottom piece of the DVD into the bottom of the pouch. Then close the slide fastener.
2) Positioning the Monitor Option 1 Vehicle Headrest (Refer to Figure 4) Figure 4 Slide screen in to the case with display pointing out Squeeze the magic tape between tilting foot and display and fix on back side. Then loop the strap of the pouch around the headrest in the vehicle and pull the end of the strap while holding the buckle until the pouch is tightly secured. Option 2 Flat Surface (Refer to Figure 5) Figure 5 Rotate the base of Monitor backward and place it on a flat surface.
E. Controls, Indicators, and Connectors 1.
2. Single Monitor View (Refer to Figure 7) Figure 7 1). 2). 3). 4). 5). 6). 7). Brightness Up/Down Control Power Off/On Switch AV In Jack DC 9-12V Input Jack Headphone Jack Up/Down Switch Volume Up/Down Control NOTE: Press the Up/Down Switch, you can reverse the screen image. 7 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
3. Remote Control View (Refer to Figure 8) 1) Setup Button 2) Up Button 3) Skip- Button 4) Enter Button 5) Reverse/Left Keypad 6) DOWN Button 7) Numeric Button 8) Display Button 9) Zoom Button 10) Subtitle Button 11) Skip+ Button 12) A-B Repeat Button 13) Forward/Right Keypad 14) 1/All Repeat Button 15) Stop Button 16) Menu Button 17) Audio Button Figure 8 18) Angle Button 19) Play/Pause Button F. Loading and Playing a Disc a. After connecting power to the unit, power on “DVD player” with the power switch.
G. Setup 1. General Setup Page 1)With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears. At ” is highlighted. Press ‘SETUP’ again to exit the the same time, “ Setup Menu and the unit will resume it’s last playback mode. Main Setup Menu Screen 2)Press the ENTER button, “SPDIF Output” is highlighted. 3) Press the or button to select the other menus in general setup page. 4) Press to enter the sub menu.
a) SPDIF Output * SPDIF Off: The digital signal audio output will be off. * SPDIF/RAW: The audio output will be not modulated. * SPDIF/PCM: The audio output will be modulated in Pulse Code Modulation mode. b) TV Display * Normal/PS: When the player outputs signal to a normal TV, a normal picture is shown on the full screen. * Normal/LB: When the player outputs signal to a normal TV, a normal picture is shown on the screen with a black strip at both the top and bottom of the screen.
2.Video Quality Setup 1)In Setup menu, Press the or button to select “Video Quality Setup” is highlighted. Press ENTER to enter the video quality setup and page. 2)Press the ENTER button, “Brightness” is highlighted. 3)Press the or button to select the other menus in video quality setup page. 4) Press to enter the sub menu. 5) Press the or button to adjust the quantity and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu.
3. Password In Setup menu, Press the or button to select “Password Setup Page” and is highlighted. Press ENTER to enter the password page. Password Setup Page Screen Display Press ENTER twice to enter the Password Change Page. Input the Old Password or the Default Password, the New Password, and the Confirmed New Password. Press ENTER to confirm the change. Password Change Page Screen Display Note: The default password is 3308. 4.
page. 4) Press to enter the sub menu. Preference Audio Language 5) Press the or button to select the sub menu and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu. a) Audio b) Subtitle c) Disc Menu Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages.
d) Select ‘Parental’ using the UP/DOWN button, then press RIGHT to enter the submenu. Parental Preference Screen Display Select the parental level you desire using the UP/DOWN button for discs with lock-out function or multiple rating levels. These are listed from the lowest level (1 Kid Safe) to the highest level (8 Adult). Press ENTER and input 4 digit password, then press ENTER again to confirm the parental level setting. NOTE: The level of 8 Adult is the factory default.
H.
I. Menu A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. J. Display 1. PLAYING TIME AND REMAINING TIME a.
2. ANGLE During playback of a disc, press ‘ANGLE’ to display the available angles for discs containing multi-angles*, with the current angle number (1) and the total number of angles (2) displaying. Press ‘ANGLE’ to select another angle, then press again to exit and return to the normal viewing angle. The angle display will disappear automatically if the ‘ANGLE’ button is not pressed again within 3 seconds. *NOTE: Not all discs contain this feature. Angle Screen Display 3.
4. AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within for 3 seconds. Audio Language Screen Display * Some DVDs only allow access to this function through the DVD menu. 5.
6. A-B REPEAT a. During playback press a first time ‘A-B’ to set the Starting Point A. A-B Repeat Starting Point Screen Display b. Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. A-B Repeat Ending Point Screen Display c. Press A-B a third time to cancel A-B repeat and resume normal playback. A-B Repeat Cancelled Screen Display 19 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
7. REPEAT a. During playback press ‘REPEAT’ constantly to see the repeat mode. Chapter: Repeat the current chapter Title: Repeat the current title All: Repeat all chapters and titles Off: Resume normal playback The ‘Chapter’ repeat display shows below for example: Chapter Repeat Screen Display K. Variable Playing Mode 1. Playing Audio CDS When playing an audio CD press the DISPLAY button constantly on the remote to view time information.
Total Elapsed: The current track playing and the total time that the CD has been playing. Total Remain: The current track playing and the amount of time remaining on the CD. Display Off: The CD time Information will not be displayed. Take ‘Single Elapsed’ display as a example: Single Elapsed Screen Display USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • Track- repeats the track that is playing.
2. Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system. MP3 MENU Screen Display When a MP3 disc is inserted into the unit, the menu screen appears automatically.
4. Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF(Folder). Pressing REPEAT consecutively changes the repeat options: • Single • Repeat One (repeat playback of a song) • Repeat Folder (repeat playback of a specific folder) • Folder (normal playback) As you toggle through the options, the repeat mode changes.
3. Playing JPG file 1) Load the JPG Disc into tray. 2) Select JPG file by pressing “UP/DOWN” or ENTER button through menus or submenus. To go back previous menu page, use LEFT button. 3) You can preview the JPG file which you selected by pressing “PLAY” or “ENTER”. 4) Pressing the “LEFT“ Key will rotate the picture 90 degrees counterclockwise. Pressing the “RIGHT“ Key will rotate the picture clockwise.
L. Connecting to a TV or another monitor ( Refer to Figure 9) You can also connect the DVD player to a TV to enjoy high quality stereo sound and picture on another monitor. Connection cable not included. 1. Connect one end of the audio/video cable’s black plug (optional, 1/8” stereo plug) into the unit’s DVD AUDIO OUT jack, and connect the other end to the AUDIO INPUT jacks on your TV or Monitor (white = left channel, red = right channel). 2.
M. Specifications Compatible DISC: DVD/CD/MP3 Signal system: NTSC/PAL Panel size: 7 inch Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4Vrms/10kOhm Audio S/N: Better than 60 dB Dynamic range : Better than 85 dB Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm Power source: DC 9V Power consumption: 6 W Operating temperature: 5~35°C Weight : 0.43 kg Dimensions (W x D x H): 6.54 X 5.59 X1.
N. Troubleshooting PROBLEM No sound or distorted sound SOLUTION • Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Can’t advance through a movie • You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The icon ( ) appears on screen The feature or action cannot be completed at this time because: 1.
Troubleshooting (Cont) PROBLEM IR sensor inoperative Disc won’t play Play starts, but then stops immediately SOLUTION • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s.
