SDS

ManualsBrandsSakrete ManualsBagged ConcreteHigh Strength Anchoring Epoxy

Safety Data Sheet

Sakrete High Strength Anchoring Epoxy

Created 03/10/2015

Revision 01/31/2018

Version: 3.0

Page 1 of 12

1. Product and Company Identification

Product Name: Sakrete High Strength Epoxy Resin (Part A)

Product Use: Anchoring

Emergency Phone:

For Hazardous Materials [or Dangerous Goods] Incident

Spill, Leak, Fire, Exposure, or Accident

Call CHEMTREC Day or Night

1-800-424-9300 [USA] / +1 703-527-3887 [CAN]

Supplier Identification:

Sakrete of North America

625 Griffith Rd, Ste 100

Charlotte, NC 28217

Contact Phone: 866-725-7383

2. Hazards Identification (Part A)

GHS Classification

GHS Label:

Warning:

Eye Irritant

Skin Irritant

Emergency Overview

May cause skin sensitization

Causes skin and eye irritation

May cause cancer

Wash skin thoroughly after handling

Avoid breathing fume/gas/mist/vapors/spray

Wear protective gloves/ protective clothing/ eye protection/ face protection

Use outdoors or in a well-ventilated area

Primary Route of Exposure

Eyes, skin and oral

Carcinogenicity

This product or one of its ingredients present at 0.1% or more IS listed as a carcinogen or suspect carcinogen by

NTP, IARC, Prop 65 or OSHA.

This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1

carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the

Health

Physical

Environmental

Skin Irritant Cat 2

Eye Irritant Cat 2B

Carcinogen Cat 2

Not Classified

Summary of content (12 pages)

PAGE 1
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created 03/10/2015 Revision 01/31/2018 Version: 3.0 1. Product and Company Identification Product Name: Sakrete High Strength Epoxy Resin (Part A) Supplier Identification: Sakrete of North America 625 Griffith Rd, Ste 100 Charlotte, NC 28217 Contact Phone: 866-725-7383 2.
PAGE 2
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of this product will create a possible silica dust hazard).
PAGE 3
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 Environmental Precautions Cover spills with sawdust, vermiculite, or other absorbent material to minimize spreading of the material before collecting. 7. Handling and Storage (Part A) Handling: Avoid contact with eyes, skin and clothing. Avoid inhalation of vapors. Use with adequate ventilation. Use appropriate personal protection equipment (Section 8). Wash thoroughly after handling.
PAGE 4
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 Odor Threshold: Melting/Freezing Point: Boiling Point and Range Solubility in Water: Specific Gravity(g/cc): Vapor Density(air = 1): Vapor Pressure: VOC Content: pH: Boiling Point: N/D N/D N/D Insoluble N/D N/D N/D See section 9 of part B for VOC content N/D N/D 10.
PAGE 5
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 STOT – single exposure Not Determined STOT – Repeated Exposure Not Determined Carcinogenicity Classification: Titanium Dioxide: IARC Group 2B: Possibly carcinogenic to humans. This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
PAGE 6
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 15.
PAGE 7
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 1. Product and Company Identification Product Use: Anchoring Product Name: Sakrete High Strength Epoxy Hardener (Part B) Supplier Identification: Sakrete of North America 625 Griffith Rd., Ste 100 Charlotte, NC 28217 Contact Phone: 866-725-7383 2.
PAGE 8
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant.
PAGE 9
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 Cover spills with sawdust, vermiculite, or other absorbent material to minimize spreading of the material before collecting. 7. Handling and Storage (Part B) Handling: Avoid contact with eyes, skin and clothing. Avoid inhalation of vapors. Use with adequate ventilation. Use appropriate personal protection equipment (Section 8). Wash thoroughly after handling.
PAGE 10
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 Vapor Pressure: VOC Content: pH: Boiling Point: N/D 2 g/L (tested per EPA CFR 40, Part 63, Subpart PPPP, Appendix A) N/D N/D 10. Stability and Reactivity (Part B) Stability: Stable Thermal Decomposition: Can yield CO, CO2 and organic Nitrogen compounds.
PAGE 11
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 Not Determined Carcinogenicity Classification: Quartz Silica Sand (Crystalline Silica): IARC Group1: Known human carcinogen based on human evidence. NTP (National Toxicology Program) has classified Crystalline Silica as a known human carcinogen. 12. Ecological Information (Part B) Acute Toxicity for: Fish: Polyamide Resin: Zebrafish /LC50 (96hrs): >5.
PAGE 12
Safety Data Sheet Sakrete High Strength Anchoring Epoxy Created On: 03/10/2015 Revision Date: 04/06/16 Version: 3.0 15.