User's Manual

ManualsBrandsSaitek Electronics ManualsElectronicsPS30 Cyborg Evo wireless joystick for PC

Cyborg evo Wireless User Manual

Getting Started

Features:

Battery

Your Cyborg evo Wireless uses one AA alkaline battery (supplied) which should give up

to 50 hours of use. To fit the battery, open the battery compartment on the bottom of

your joystick by sliding back the cover. Insert the AA battery in the direction shown and

replace the cover.

LED power status

The Saitek Cyborg evo Wireless features an LED (Light Emitting Diode) on the top of the

stick which shows how much power is left in the battery. A green light means there is

between 20-80% of power remaining; amber means there is between 10-20% power

remaining; and red means there is less than 10% power and you will soon have to

replace the battery.

Plugging in the wireless receiver

Unclip the wireless receiver (or dongle) from the bottom of the evo Wireless joystick and

plug into one of your computer’s USB ports.

Sleep mode

Your Cyborg evo Wireless features a sleep mode to conserve battery life. After ten

minutes of no activity, the stick will power down and the head LED will switch off. Press

any of the buttons to wake the stick.

Scan Button

In certain circumstances, there may be interference to the signal between your stick and

the wireless receiver dongle in your computer caused by other wireless devices nearby.

To switch to an interference-free wireless channel, press the scan button on the

underside of your stick once.

Radio frequency

The Cyborg evo Wireless operates at a frequency of 2.402 – 2.480 GHz

Summary of content (13 pages)

PAGE 1
Cyborg evo Wireless User Manual Getting Started Features: Battery Your Cyborg evo Wireless uses one AA alkaline battery (supplied) which should give up to 50 hours of use. To fit the battery, open the battery compartment on the bottom of your joystick by sliding back the cover. Insert the AA battery in the direction shown and replace the cover. LED power status The Saitek Cyborg evo Wireless features an LED (Light Emitting Diode) on the top of the stick which shows how much power is left in the battery.
PAGE 2
Installing joystick driver software Important note: Calibrating your joystick The Saitek Cyborg evo Wireless stick uses a dynamic auto-calibration system, which is designed to give you more accurate control. To maximise the effectiveness of calibration, ensure that the stick is moved fully forwards, backwards and to both sides after booting up your PC and before loading up your game.
PAGE 3
9 At the Registration screen, select Check this box to register now and follow the on-screen instructions, or you can choose to select this option later. 10 Click on Finish to complete the installation. b) Drivers and programming software for advanced users 1 Follow points 1 – 7 of the install procedure in A), then at the Software Setup screen, select Install the SST Programming Software and click Next. 2 In the following Software Setup screen, click Next and follow the on-screen instructions.
PAGE 4
8 Now try out all your controller’s buttons and controls to show that it is working properly. When you have finished, click OK. 9 At the Programming Software screen, select Typical User and click Next. 10 At the Registration screen, select Register and follow the on-screen instructions or select Register Later and click Next. 11 Click on Finish to complete the installation.
PAGE 5
4 After reading and accepting the Disclaimer, click Next to continue. Note: For your controller to work, you must have a minimum of Microsoft® DirectX® 8.1 installed on your computer. The installer will automatically recognize if this software needs to be added, and will allow you to install it directly from the Saitek Product Companion CD, if necessary. If you are asked to install Microsoft® DirectX® 8.1, click Install and follow the onscreen instructions, and then restart your computer when prompted.
PAGE 6
5. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation. Note: Driver updates From time to time there may be updates to the driver and programming software for this product. You can check for the latest software updates by visiting the Saitek website and clicking on Downloads.
PAGE 7
Note: Even if the game you are using does not support game controllers, it is possible to make the controller work in that game using the Saitek Smart Technology programming software (only installed if you chose to be an Advanced User when installing). Using the programming software allows you to program your controller with keyboard and mouse commands, enabling it to work in those games that only have support for keyboards and mice.
PAGE 8
Programming your Saitek controller with Saitek Smart Technology Programming Software Introducing Saitek Smart Technology Programming Software Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to configure your Saitek controller for enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with the ultimate configuration for total interaction.
PAGE 9
virtually unlimited programming capabilities and allows you to customize the controller to your exact gaming needs. The Profile Editor allows you to program the buttons on your controller to perform different actions within your games – this is especially useful if the game you are using does not have its own screen that allows reconfiguring of your buttons. Getting Started 1 Double-click on the Saitek Smart Technology icon the install left on your desktop.
PAGE 10
To find your local Saitek Technical Support Center, please see the separate Technical Support Center sheet that came packaged with this product. Conditions of Warranty 1 Warranty period is 2 years from date of purchase with proof of purchase submitted. 2 Operating instructions must be followed.
PAGE 11
FCC Compliance and Advisory Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and; 2 This device must accept any interference received, including interference that may cause undesired operation.
PAGE 12
Importer’s Declaration of Conformity Manufacturers address: Saitek Electronics (Shenzhen) Ltd Da Bao Road District 33 Shenzhen PRC Authorised representatives address: Saitek plc 3 & 4 West Point Row Great Park Road Almondsbury Bristol BS 32 4QG United Kingdom Identification of Equipment: PS30 – Cyborg Evo wireless Joystick for PC Intended usage: For home use Conformity specification: Reference to European harmonised standards EN 600 65 :1998 EN 300 440-2 :2001 EN 301 489-17:2000 Technical Construction File
PAGE 13
©2004 Saitek Ltd. Made and printed in China. All trademarks are the property of their respective owners. XXXX Disclaimer: http://www.saitek.com/uk/info/email.