User Manual

ManualsBrandsSagrad ManualsElectronicsRFID Reader

Table Of Contents

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Certification Exhibit

FCC ID: VRA-SG9011079

IC: 7420A-SG9011079

FCC Rule Part: CFR Part 90 Subpart I, Part 90 Subpart M

IC Radio Standards Specification: RSS-137

ACS Report Number: 10-2041.W06.11.A

Manufacturer: Sagrad, Inc.

Model: SG901-1075

Manual

Summary of content (5 pages)

PAGE 1
Certification Exhibit FCC ID: VRA-SG9011079 IC: 7420A-SG9011079 FCC Rule Part: CFR Part 90 Subpart I, Part 90 Subpart M IC Radio Standards Specification: RSS-137 ACS Report Number: 10-2041.W06.11.A Manufacturer: Sagrad, Inc. Model: SG901-1075 Manual 5015 B.U.
PAGE 2
Installation / Users Manual For: RFID Reader Model SG901-1079 Sagrad Inc. Corporate Headquarters and Service 751 North Drive, Suite 10 Melbourne, Fl 32934 PH# 321-255-0515 Toll Free 888-723-5521 Fax 321-214-0315 www.Sagrad.
PAGE 3
Product Description: You have purchased an RFID Reader. This product was designed to be used for reading RFID Tags. To turn the unit on plug the power cable into the power connector and turn on the power. This unit has a self contained antenna. Installation: To install this product use the four mounting holes on the mounting bracket on the bottom side of the chassis. Place where there is no obstruction between the RFID Reader and the TAG.
PAGE 4
General Statement: Warning: Changes or modifications to this device not expressly approved by Sagrad Inc. could void the user’s authority to operate the equipment. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
Limited Warranty Sagrad Inc. (“Sagrad”) warrants this Product (including any accessories) against defects in material or workmanship as follows: • • • LABOR: For the period of one (1) year from the date of purchase, if this product is determined to be defective, Sagrad will repair or replace the Product, as its option, at no charge, or pay labor charges to any Sagrad authorized service facility. After the warranty Period, the customer is liable for all labor charges.