User's Manual

ManualsBrandsSagrad ManualsElectronicsSIDEWINDER ASSISTIVE LISTENING TRANSMITTER

Sagrad DOC # 906-0001

Installation / Users Manual

For:

8 Channel Assistive Listening Transmitter

Model SG901-1023

Sagrad Inc.

Corporate Headquarters and Service

4325 Woodland Park Drive, Suite 101

West Melbourne, Fl 32904

PH# 321-956-5496

Toll Free 888-723-5521

Fax 321-214-0315

www.Sagrad.com

FCC NOTICE

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Summary of content (8 pages)

PAGE 1
Installation / Users Manual For: 8 Channel Assistive Listening Transmitter Model SG901-1023 Sagrad Inc. Corporate Headquarters and Service 4325 Woodland Park Drive, Suite 101 West Melbourne, Fl 32904 PH# 321-956-5496 Toll Free 888-723-5521 Fax 321-214-0315 www.Sagrad.com FCC NOTICE This device complies with part 15 of the FCC Rules.
PAGE 2
Product Description You have purchased a multichannel audio transmission device design for the assistive listening service. This device is designed to improve the ability of the users to hear audio content though the use of a personalized listening receiver. This device is compatible with most commonly available commercial FM receiver used in the 70MHz band identified as assistive listening devices.
PAGE 3
Instructions For Product Use 1. Read Instructions—All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions—The safety and operating instructions should be retained for future reference. 3. Heed Warnings—All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions—All operating and user instructions should be followed. 5. Cleaning—Unplug this product from the wall outlet before cleaning.
PAGE 4
15. Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged, b. If liquid has been spilled, or objects have fallen into the product, c. If the product has been exposed to rain or water, d. If the product does not operate normally by following the operating instructions. e. If the product has been dropped or damaged in any way, and f.
PAGE 5
EQUIPMENT CABINET INSTALLATION The Sagrad equipment box contains the transmitters, antenna, power supply, rack mounting hardware and wall mounting hardware. Find a space that the cabinet will fit in/on near the A/V equipment that will be connected to the transmitters. The cabinet is 17 1/4” wide x 3 1/2” high x 10” deep. CABINET MOUNT INSTALLATION Step #1: Install rack mounted brackets on the two sides of the transmitter box with the screws provided.
PAGE 6
CENTRAL TRANSMITTING ANTENNA INSTALLATION Step #1: Run the 22’ coaxial antenna to the predetermined locations within the establishment. A standard 8’ step ladder, staple gun for coax and six 4” zip ties will be required. This antenna will already be connected to the transmitter. Step #2: Mount the last 80” of the 22’ coaxial antenna horizontally. This is the part that transmits the signal. Keep clear of AC power line, fluorescent lights, NEON lights and other devices that may transmit electrical noise.
PAGE 7
Packing List 1. One SG901-1023 8 Channel Transmitter 2. One 9V DC Power Supply 3. One Antenna 4. Two Rack Mounted Brackets 5. One User / Installation manual User Section This product needs no adjustments. Follow the installation instructions and you are ready to operate the unit. Below is a list of frequencies that are being used on each channel: Channel 1 = 72.1 MHz Channel 2 = 72.5 MHz Channel 3 = 72.9 MHz Channel 4 = 75.3 MHz Channel 5 = 72.3 MHz Channel 6 = 72.7 MHz Channel 7 = 74.7 MHz Channel 8 = 75.
PAGE 8
Limited Warranty Sagrad Inc. (“Sagrad”) warrants this Product (including any accessories) against defects in material or workmanship as follows: • • • LABOR: For the period of one (1) year from the date of purchase, if this product is determined to be defective, Sagrad will repair or replace the Product, as its option, at no charge, or pay labor charges to any Sagrad authorized service facility. After the warranty Period, the customer is liable for all labor charges.